|
US$599.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
QC/T 1228-2025: Test method for automotive organic light emitting diode (OLED) light sources
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| QC/T 1228-2025 | English | 599 |
Add to Cart
|
5 days [Need to translate]
|
Test method for automotive organic light emitting diode (OLED) light sources
| Valid |
QC/T 1228-2025
|
Basic data | Standard ID | QC/T 1228-2025 (QC/T1228-2025) | | Description (Translated English) | Test method for automotive organic light emitting diode (OLED) light sources | | Sector / Industry | Automobile & Vehicle Industry Standard (Recommended) | | Classification of Chinese Standard | T38 | | Classification of International Standard | 43.020 | | Word Count Estimation | 30,337 | | Date of Issue | 2025-05-09 | | Date of Implementation | 2025-11-01 | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | QC/T 1228-2025: Test method for automotive organic light emitting diode (OLED) light sources---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/QCT1228-2025
Automobile Industry Standards of the People's Republic of China
Organic light-emitting diode (OLED) lighting sources for automobiles
Test methods
Test method for automotive organic light emitting diode (OLED) light sources
Released on May 9, 2025
2025-11-01 Implementation
CCS T 38
ICS 43.020
Ministry of Industry and Information Technology of the People's Republic of China issued
Preface III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Basic parameters of OLED lighting source 3
5 Measurement requirements 3
6 Measurement methods of photoelectric characteristic parameters of OLED lighting sources 6
7 Test methods for OLED lighting source performance 12
Appendix A (Informative) Test Summary 23
Reference 25
Table of Contents
Preface
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document was proposed and coordinated by the National Technical Committee for Standardization of Automotive Products (SAC/TC 114).
This document was drafted by. Huayu Vision Technology (Shanghai) Co., Ltd., Shanghai Motor Vehicle Inspection and Certification Technology Research Center Co., Ltd., Hangzhou
Yuanfang Optoelectronic Information Co., Ltd., Gu'an Yiguang Technology Co., Ltd., Baoji Station of National Light Industry Electric Light Source Product Quality Supervision and Inspection, Shanghai
Fuzhan Intelligent Technology Co., Ltd. and Shanghai Xinyao Electronics Co., Ltd.
The main drafters of this document are. Lu Jun, Li Jiaying, Yu Qianqian, Li Min, Wang Kuan, Wen Yingying, Bu Weili, Yang Tong, Le Gang, and Yang Xiaofeng.
Organic light-emitting diode (OLED) lighting sources for automobiles
Test methods
1 Scope
This standard specifies the optical properties,
Performance parameters of electrical properties and automotive durability characteristics, as well as standard test conditions and standard test methods for these performance parameters.
This standard applies to OLED lighting sources used in interior and exterior automotive lamps.
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document.
The version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document.
GB/T 36919 Organic light-emitting diode lighting terms and symbols
GB/T 39394-2020 Test methods for LED lamps, LED luminaires and LED modules
GB/T 20871.2-2007 Organic Light Emitting Diode Displays Part 2.Terminology and Text Symbols
ANSI/ESDA/JEDEC JS-001 Static Discharge Sensitivity Test Human Body Model (HBM) Component Level [For electrostatic
JEDEC JESD22-A115C Electrostatic Discharge (ESD) Sensitivity Test, Machine Model (MM)
(ESD) Sensitivity Testing, Machine Model (MM)]
JEDEC JESD22-A101D.01 Steady-State Temperature-Humidity Bi‑
as Life Test
JEDEC JESD22-A103E.01 High Temperature Storage Life
JEDEC JESD22-A104F Temperature Cycling
JEDEC JESD22-A105D Power and Temperature Cycling
JEDEC JESD22-A108F Temperature, Bias, and Operating Life
JEDEC JESD22-A119A Low Temperature Storage Life
DIN 75220 Aging Automobile Components in Solar Simulation Units
IEC 60068-2-27 Environmental testing. Part 2-27.Tests. Test Ea and guidance. Shock
27.Tests‑Test Ea and guidance. Shock)
IEC 60068-2-60-2015 Environmental testing Part 2.60.Tests Test Ke. Flowing mixed gas corrosion test (Envi‑
ronmental testing-Part 2-60.Tests-Test Ke. Flowing mixed gas corrosion test)
3 Terms and Definitions
The terms and definitions defined in GB/T 36919 and the following apply to this document.
3.1
OLED lightingOLED lighting
Interior and exterior lighting functions using OLEDs as light sources.
|