|
US$279.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
QC/T 1227-2025: Technical specifications for automobile bevel box
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| QC/T 1227-2025 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Technical specifications for automobile bevel box
| Valid |
QC/T 1227-2025
|
Basic data | Standard ID | QC/T 1227-2025 (QC/T1227-2025) | | Description (Translated English) | Technical specifications for automobile bevel box | | Sector / Industry | Automobile & Vehicle Industry Standard (Recommended) | | Classification of Chinese Standard | T23 | | Classification of International Standard | 040.50 | | Word Count Estimation | 14,180 | | Date of Issue | 2025-05-09 | | Date of Implementation | 2025-11-01 | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | QC/T 1227-2025: Technical specifications for automobile bevel box---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/QCT1227-2025
Automobile Industry Standards of the People's Republic of China
Technical specifications for automotive angle steering gear
Released on May 9, 2025
2025-11-01 Implementation
CCS T 23
ICS 040.50
Ministry of Industry and Information Technology of the People's Republic of China issued
Published by China Standards Press
Preface III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 General Requirements 2
5 Technical Requirements 2
6 Test Method 3
7 Inspection Rules 7
Table of Contents
Preface
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document was proposed and coordinated by the National Technical Committee for Standardization of Automotive Products (SAC/TC 114).
This document was drafted by. Jiangmen Xingjiang Steering Gear Co., Ltd., China Automotive Engineering Research Institute Co., Ltd., Yutong Bus Co., Ltd.
Co., Ltd., BYD Co., Ltd., Jiangsu Gelton Transmission Co., Ltd., Zhongtong Bus Co., Ltd., Nanjing Donghua Intelligent Steering
Systems Co., Ltd., Guangzhou Auto Parts Product Quality Supervision and Inspection Center, and Shaoxing Jinjiang Machinery Co., Ltd.
The main drafters of this document are. Li Binghong, Xiao Jianyong, Ai Hongxia, Zheng Xiaolong, Sheng Jun, Wang Jianming, Zhang Ruidong, Chen Chunhua, Zhang Peng, Chen Zhenpeng,
Jiang Darong, Lai Wenxin, and Sun Wenlong.
Technical specifications for automotive angle steering gear
1 Scope
This document specifies the technical requirements, test methods and inspection rules for automotive angle steering gear.
This document applies to automotive angle steering gear, which is an angular transmission device located between the steering wheel and the power steering gear (hereinafter referred to as the "assembly").
2 Normative references
The contents of the following documents constitute the essential terms of this document through normative references in this document.
The version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document.
GB/T 10125 Artificial atmosphere corrosion test Salt spray test
GB/T 35360-2017 Automotive Steering System Terms and Definitions
3 Terms and Definitions
For the purposes of this document, the terms and definitions defined in GB/T 35360-2017 and the following apply.
3.1
Angle steering bevel box
A device that transmits torque at a fixed angle and transmission ratio between the input and output ends. Its application diagram is shown in Figure 1.
Description of index number.
1--steering wheel; 4--steering drive shaft;
2--Steering column; 5--Power steering gear.
3--Angle steering gear;
Figure 1 Schematic diagram of angle steering application
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of QC/T 1227-2025_English be delivered?Answer: Upon your order, we will start to translate QC/T 1227-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of QC/T 1227-2025_English with my colleagues?Answer: Yes. The purchased PDF of QC/T 1227-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|