|
US$439.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
QC/T 1225-2025: Curtain side semi-trailer
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| QC/T 1225-2025 | English | 439 |
Add to Cart
|
4 days [Need to translate]
|
Curtain side semi-trailer
| Valid |
QC/T 1225-2025
|
Basic data | Standard ID | QC/T 1225-2025 (QC/T1225-2025) | | Description (Translated English) | Curtain side semi-trailer | | Sector / Industry | Automobile & Vehicle Industry Standard (Recommended) | | Classification of Chinese Standard | T71 | | Classification of International Standard | 43.080.10 | | Word Count Estimation | 22,255 | | Date of Issue | 2025-05-09 | | Date of Implementation | 2025-11-01 | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | QC/T 1225-2025: Curtain side semi-trailer---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/QCT1225-2025
Automobile Industry Standards of the People's Republic of China
Curtain-side semi-trailer
Curtain side semi-trailer
Released on May 9, 2025
2025-11-01 Implementation
CCS T 71
ICS 43.080.10
Ministry of Industry and Information Technology of the People's Republic of China issued
Preface III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Technical Requirements 2
5 Test methods 5
6 Inspection Rules 7
7 Identification, accompanying documents, transportation and storage 8
Appendix A (Normative) Floor Strength Requirements and Test Methods 9
Appendix B (Normative) Carriage Strength Test Method 10
Reference 14
Table of Contents
Preface
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document was proposed and coordinated by the National Technical Committee for Standardization of Automotive Products (SAC/TC 114).
This document was drafted by. Highway Research Institute of the Ministry of Transport, Henan Juntong Vehicle Co., Ltd., Yangzhou Yinjiang Pengfan Products Co., Ltd.,
CIMC Vehicles (Group) Co., Ltd., China Automotive Research Institute Vehicle Inspection Center (Wuhan) Co., Ltd., Yangzhou CIMC Tonghua Special Vehicle Co., Ltd.,
Shandong Luoxiang Automobile Manufacturing Co., Ltd., Shanghai Motor Vehicle Inspection and Certification Technology Research Center Co., Ltd., Schmitz Vehicle (Shanghai) Co., Ltd.,
Kunshan Adaike Auto Parts Co., Ltd., Anhui Kaile Special Vehicle Co., Ltd., and Hebei Yujiema Special Vehicle Manufacturing Co., Ltd.
The main drafters of this document are. Zong Chengqiang, Zhang Lei, Zhang Hongwei, Wu Yonggen, Song Yanwen, Wu Shifeng, Zhang Xueli, Feng Huijian, Wang Bing, Cao Honglou,
Zhu Zhihao, Liu Xun, Zhang Hao, Zhang Zhengguo, Li Yongsheng, Shi Jianqin, Feng Bing, Feng Chaoming, Jiang Pengzheng, and Nie Yuanpeng.
Curtain-side semi-trailer
1 Scope
This document specifies the technical requirements, test methods, inspection rules, markings, accompanying documents,
Transportation and storage.
This document applies to curtain side semi-trailers used on roads.
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to this document.
document.
GB 1589 External dimensions, axle loads and mass limits for motor vehicles, trailers and motor vehicle trains
GB/T 3730.1 Terms and definitions for motor vehicles, trailers and motor vehicle trains Part 1.Types
GB/T 3730.3 Terms and definitions for motor vehicles and trailers - Vehicle dimensions
GB 7258 Technical conditions for motor vehicle operation safety
GB/T 12586 Rubber or plastics coated fabrics - Determination of resistance to flexural failure
GB/T 20953 Determination of combustion characteristics of interior materials for cabs of agricultural and forestry tractors and machinery
GB 23254 Retroreflective markings on trucks and trailers
GB/T 23336 General technical requirements for semi-trailers
GB/T 39037.2 General requirements for the arrangement of securing points and securing equipment for road vehicles used for seaborne ro-ro transport - Part 2
Category. Semi-trailer
GB/T 42933 Multimodal transport unit identification
HG/T 2580 Rubber or plastic coated fabrics - Determination of tensile strength and elongation at break
HG/T 2581.1 Rubber or plastics coated fabrics - Determination of tear resistance - Part 1.Constant tear rate method
HG/T 3050.2 Rubber or plastics coated fabrics - Determination of properties of the whole roll - Part 2.Determination of total mass per unit area, unit
Method for calculating coating mass per area and base fabric mass per unit area
HG/T 3052 Determination of adhesion strength of coatings on rubber or plastic coated fabrics
JT/T 1178.2 Safety Technical Requirements for Commercial Trucks Part 2.Towing Vehicles and Trailers
3 Terms and Definitions
The terms and definitions defined in GB/T 3730.1, GB/T 3730.3 and the following apply to this document.
3.1
Curtain side semi-trailer
The cargo area is of curtain side type, with sliding curtains, side pillars, curtain tightening devices and/or cargo barriers, rails, etc.
The semi-trailer has a roof composed of left and right side beams, front and rear end beams, metal cross beams and a top plate, and the fastening points are set on the side beams and/or the floor.
3.1.1
detachable curtain side semi⁃trailer
The side columns and side curtains are independent of each other, and there are cargo panels or railings between the side columns.
|