|
US$439.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
NB/T 11524-2024: General technical requirements of mine sprinkler robot
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| NB/T 11524-2024 | English | 439 |
Add to Cart
|
4 days [Need to translate]
|
General technical requirements of mine sprinkler robot
| Valid |
NB/T 11524-2024
|
Basic data | Standard ID | NB/T 11524-2024 (NB/T11524-2024) | | Description (Translated English) | General technical requirements of mine sprinkler robot | | Sector / Industry | Energy Industry Standard (Recommended) | | Classification of Chinese Standard | D98 | | Classification of International Standard | 29.260.20 | | Word Count Estimation | 21,221 | | Date of Issue | 2024-05-24 | | Date of Implementation | 2024-11-24 | | Issuing agency(ies) | National Energy Administration | NB/T 11524-2024: General technical requirements of mine sprinkler robot---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 29.260.20
CCSD98
Energy Industry Standards of the People's Republic of China
General technical requirements for water sprinkler fire extinguishing robots for mines
Released on 2024-05-24
Implementation on November 24, 2024
The National Energy Administration released
Table of contents
Preface III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Product models and categories 2
5 Technical Requirements 3
6 Test methods 7
7 Inspection Rules 14
8 Marking, packaging, transportation and storage 15
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document was proposed by the Science and Technology Development Department of the China Coal Industry Association.
This document is under the jurisdiction of the Coal Industry Coal Mine Safety Standardization Technical Committee.
This document was drafted by. China Coal Technology and Engineering Group Shenyang Research Institute Co., Ltd., Anbiao National Mining Product Safety Marking Center Co., Ltd.,
CITIC Heavy Industries Kaicheng Intelligent Equipment Co., Ltd., Shandong Guoxing Intelligent Technology Co., Ltd., Fushun China Coal Technology and Engineering Testing Center Co., Ltd.,
Coal Science (Beijing) Testing Technology Co., Ltd.
The main drafters of this document are. Ma Long, Chang Lin, Guo Changna, Li Zhe, Li Zhenxin, Wang Yangyang, Wang Lei, Chen Qing, Luo Tienan, Chen Yongran, Qian Xu,
Wang Zhe, Pei Wenliang, Zhang Yan, Wang Dong, Zou Xiaoxu, Meng Jijian, Wu Yujing, Li Zongwei, Bao Mingsong, Sun Hongxiu, Wen Liang, Miao Kebin.
General technical requirements for mine fire sprinkler robots
1 Scope
This document specifies the product models and classifications, technical requirements, test methods, inspection rules and markings, packaging and
Packaging, transportation and storage.
This document is applicable to water spraying fire extinguishing robots used in underground coal mines, open-pit coal mines, coal preparation plants, non-coal mines and other mining workplaces.
(hereinafter referred to as “Robot”).
2 Normative references
The contents of the following documents constitute essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
GB/T 191 Pictorial markings for packaging, storage and transportation
GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2.Test methods Test A. Low temperature
GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2.Test methods Test B. High temperature
GB/T 2423.4-2008 Environmental testing for electric and electronic products Part 2.Test methods Test Db. Cyclic damp heat (12h
12h cycle)
GB/T 2423.5-2019 Environmental testing Part 2.Test method Test Ea and guidance. Impact
GB/T 2423.10-2019 Environmental testing Part 2.Test methods Test Fc. Vibration (sinusoidal)
GB/T 3836.1 Explosive atmospheres Part 1.General requirements for equipment
GB/T 3836.2 Explosive atmospheres Part 2.Equipment protected by flameproof type "d"
GB/T 3836.3 Explosive atmospheres Part 3.Equipment protected by increased safety "e"
GB/T 3836.4 Explosive atmospheres Part 4.Equipment protected by intrinsic safety type "i"
GB/T 4208 Enclosure protection grade (IP code)
GB/T 9969 General principles for instructions for use of industrial products
GB/T 10111 Generation of random numbers and their application in product quality sampling inspection
GB/T 12173 General electrical equipment for mining
GB/T 17626.3 Electromagnetic compatibility test and measurement technology Part 3.Radio frequency electromagnetic field radiation immunity test
GB/T 17626.4 Electromagnetic compatibility test and measurement technology Electrical fast transient pulse group immunity test
GB/T 17626.5 Electromagnetic compatibility test and measurement technology Surge (impact) immunity test
AQ1043 Mining Product Safety Signs and Labels
MT/T 210-1990 Basic test methods for electrical and electronic products used for communication, detection and control in coal mines
MT/T 899 Information transmission device for coal mines
3 Terms and definitions
The following terms and definitions apply to this document.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of NB/T 11524-2024_English be delivered?Answer: Upon your order, we will start to translate NB/T 11524-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of NB/T 11524-2024_English with my colleagues?Answer: Yes. The purchased PDF of NB/T 11524-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|