|
US$379.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
NB/T 11451-2023: Sieving and crushing transport device at coal mine gate
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| NB/T 11451-2023 | English | 379 |
Add to Cart
|
4 days [Need to translate]
|
Sieving and crushing transport device at coal mine gate
| Valid |
NB/T 11451-2023
|
PDF similar to NB/T 11451-2023
Basic data | Standard ID | NB/T 11451-2023 (NB/T11451-2023) | | Description (Translated English) | Sieving and crushing transport device at coal mine gate | | Sector / Industry | Energy Industry Standard (Recommended) | | Classification of Chinese Standard | D93 | | Word Count Estimation | 18,194 | | Date of Issue | 2023-12-28 | | Date of Implementation | 2024-06-28 | | Issuing agency(ies) | National Energy Administration | NB/T 11451-2023: Sieving and crushing transport device at coal mine gate---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 73.100.99
CCSD93
Energy Industry Standards of the People's Republic of China
Transfer crushing and screening device for chute
Released on 2023-12-28
2024-06-28 implementation
The National Energy Administration released
Table of Contents
Preface III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 2
4 Type and model compilation 2
4.1 Type 2
4.2 Model compilation 3
5 Technical Requirements 3
5.1 Applicable conditions 3
5.2 Basic parameters 3
5.3 Basic Requirements 4
5.4 Safety requirements 4
5.5 Machine Requirements 4
5.6 Appearance requirements 5
5.7 Technical requirements for transfer units 5
5.8 Technical requirements for grid screening units 5
5.9 Technical requirements for roller screening units 5
5.10 Technical requirements for wheeled crushing units 5
5.11 Technical requirements for roller crushing unit 5
5.12 Technical requirements for main components and accessories 5
6 Test methods 6
6.1 Test conditions 6
6.2 Appearance and Dimension Inspection 6
6.3 Idle running test 6
6.4 Processing capacity determination 7
6.5 Test methods for supporting electrical equipment 7
7 Inspection Rules 7
7.1 Inspection category 7
7.2 Factory Inspection 7
7.3 Type inspection 8
8 Marking, packaging, transportation and storage 9
Appendix A (Informative) Safety factor calculation formula for round link chains for mining use10
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document was proposed by the China Coal Industry Association.
This document is under the jurisdiction of the Coal Industry Coal Mine Special Equipment Standardization Technical Committee.
This document was drafted by. Ningxia Tiandi Benniu Industrial Group Co., Ltd., China Coal Technology and Engineering Group Taiyuan Research Institute Co., Ltd., Taiyuan
Coal Science Testing Technology Co., Ltd. and China Coal Zhangjiakou Coal Mine Machinery Co., Ltd.
The main drafters of this document are. Wu Lizhong, Wang Jiguo, Bu Kankan, Shi Lan, Wang Chunsheng, Wang Caijun, Zhang Peng, Tian Binyi, Liu Jinyou, Gong Wen,
Wang Yimeng, Zhang Jianjun, Fan Yilong, Li Haifeng, and Liu Weili.
Transfer crushing and screening device for chute
1 Scope
This document specifies the types and model compilation, technical requirements, test methods, inspection rules, markings,
Packaging, transportation and storage.
This document is applicable to the design, manufacture and inspection of transfer crushing and screening equipment for underground coal mine chutes.
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
GB/T 1184 Shape and position tolerances without tolerance values
GB/T 1348 Ductile iron castings
GB/T 3836.1 Explosive atmospheres Part 1.General requirements for equipment
GB/T 3836.2 Explosive atmospheres Part 2.Equipment protected by flameproof enclosure "d"
GB/T 3836.3 Explosive atmospheres Part 3.Equipment protected by increased safety "e"
GB/T 3836.4 Explosive atmospheres Part 4.Equipment protected by intrinsic safety type "i"
GB/T 5680 Austenitic manganese steel castings
GB/T 9440 Forgeable iron castings
GB/T 11352 Carbon steel castings for general engineering
GB/T 12718 High-strength round link chain for mining
GB/T 13306 Labels
GB/T 24503 Round link chain drive sprockets for mining
JB/T 9593.1 Technical requirements for flameproof three-phase asynchronous motors for use in coal mines Part 1.YBK3 series flameproof three-phase asynchronous motors for use in underground coal mines
Three-phase asynchronous motor (frame size 80~355)
MT/T 71 Open-end connecting rings for round link chains for mining
MT/T 99 Flat link for round link chain for mining
MT/T 113 General test methods and judgment rules for flame retardancy and antistatic properties of polymer products used in underground coal mines
MT/T 148 Reducer for Scraper Conveyor
MT/T 150 General technical requirements for packaging of scraper conveyors and transfer machines
MT/T 154.1 Coal mine electromechanical product model compilation method Part 1.Guidelines
MT/T 208 Hydraulic coupling for scraper conveyor
MT/T 243 High water content flame retardant fluid for hydraulic couplings in coal mines
MT/T 249 YBSD series mining flameproof double speed three-phase asynchronous motor
MT/T 374 Flame retardant V-belts for coal mines
MT/T 478 YBS series flameproof three-phase asynchronous motor for conveyor
MT/T 661-2011 General technical requirements for electrical equipment used in underground coal mines
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of NB/T 11451-2023_English be delivered?Answer: Upon your order, we will start to translate NB/T 11451-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of NB/T 11451-2023_English with my colleagues?Answer: Yes. The purchased PDF of NB/T 11451-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|