|
US$309.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
NB/T 11434.1-2023: Paste filling in coal mine - Part 1: Technical requirements of goaf isolation in fully mechanized mining face
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| NB/T 11434.1-2023 | English | 309 |
Add to Cart
|
3 days [Need to translate]
|
Paste filling in coal mine - Part 1: Technical requirements of goaf isolation in fully mechanized mining face
| Valid |
NB/T 11434.1-2023
|
PDF similar to NB/T 11434.1-2023
Basic data | Standard ID | NB/T 11434.1-2023 (NB/T11434.1-2023) | | Description (Translated English) | Paste filling in coal mine - Part 1: Technical requirements of goaf isolation in fully mechanized mining face | | Sector / Industry | Energy Industry Standard (Recommended) | | Classification of Chinese Standard | D15 | | Classification of International Standard | 73.020 | | Word Count Estimation | 14,169 | | Date of Issue | 2023-12-28 | | Date of Implementation | 2024-06-28 | | Issuing agency(ies) | National Energy Administration | NB/T 11434.1-2023: Paste filling in coal mine - Part 1: Technical requirements of goaf isolation in fully mechanized mining face
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
NB/T 11434.1-2023 English version. Paste filling in coal mine - Part 1.Technical requirements of goaf isolation in fully mechanized mining face
ICS 73.020
CCSD15
Energy Industry Standards of the People's Republic of China
Coal mine paste filling
Part 1.Technical requirements for isolation of goaf in fully mechanized mining face
Part 1.Technicalrequirementsofgoafisolationinfulymechanizedminingface
Released on 2023-12-28
2024-06-28 implementation
The National Energy Administration released
Table of Contents
Preface III
Introduction IV
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Isolation equipment and isolation materials 1
5 Isolation process requirements 4
6 Safety Technical Requirements 6
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
This document is part 1 of NB/T 11434 Paste filling in coal mines. NB/T 11434 has been published in the following parts.
--- Part 1.Technical requirements for isolation of goaf areas in fully mechanized mining working faces;
--- Part 2.General technical requirements for pipes and valves;
--- Part 3.Effect evaluation method;
--- Part 5.Technical requirements for cementitious materials.
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document was proposed by the China Coal Industry Association.
This document is under the jurisdiction of the Standardization Expert Group of China Coal Industry Association.
This document was drafted by. Shandong Kanger Energy Technology Co., Ltd., China University of Mining and Technology, Zaozhuang Mining (Group) Co., Ltd. Jiangzhuang
Coal Mine, Shandong Backfill Mining Engineering Technology Research Center, Binxian Coal Co., Ltd., Xuzhou Qingjie Intelligent Mining Technology Co., Ltd.,
China Coal Industry Association Productivity Promotion Center.
The main drafters of this document are. Chang Qingliang, Li Xiushan, Sun Xikui, Huang Shuxiang, Zhang Xizhai, Wang Cheng, Zhou Zhongping, Shi Xianyuan, Xuan Zhaojun,
Li Yongchao, Wu Xiaochen, Shen Haidong, Xu Chunhua, Wei Guangbin, Bi Zhiqiang, Li Wanshi, Wang Xu, Wang Yongkang, Wang Juanjuan, Wang Xiaomin, Che Ming, Miao Zheng,
Wang Pengfei, Yang Yang, Su Yanbing, Xie Feixiang.
Introduction
NB/T 11434 is a standard for coal mine filling mining jointly issued by the National Energy Administration, the Ministry of Finance, the Ministry of Land and Resources, and the Ministry of Environmental Protection.
Based on the document "Guiding Opinions on Coal Production", in order to promote the reform of coal production mode, solve the problems of "three under" (under buildings, under railways, under water bodies, etc.) coal pressure and
It is compiled to address the mining issues of marginal coal and residual coal, improve the level of coal resource development and utilization, improve the mining environment, and promote the healthy development of the coal industry.
This document provides standardized guidance for coal mining enterprises implementing paste filling mining. Other contents will be adjusted according to the implementation of the standard in the future.
It is added that this document is intended to consist of six parts.
--- Part 1.Technical requirements for isolation of goaf in fully mechanized mining working faces. The purpose is to
Effectively isolate the goaf during filling to prevent slurry leakage and slurry leakage accidents caused by unsatisfactory isolation, which would threaten the filling opening.
The mining is carried out safely to ensure the filling effect.
--- Part 2.General technical requirements for pipes and valves. The purpose is to standardize the design and selection of pipes and valves for coal mine paste filling and ensure that the filling pipes
The installation and use of key pipe valves at the road connection are reliable, which is conducive to the safe transportation of coal mine filling materials.
--- Part 3.Effect evaluation method. The purpose is to summarize the filling mining system and process, various filling parameters and surface deformation observation.
Measure the value and judge whether the filling mining meets the design requirements.
--- Part 4.Technical requirements for aggregates. The purpose is to standardize the classification, selection and use of aggregates for paste filling.
It provides a basis for system design, selection of key equipment, and preparation of paste filling materials.
--- Part 5.Technical requirements for cementitious materials. The purpose is to standardize the types and technical requirements of cementitious materials used for paste filling, and ensure
Paste pipeline transportation safety, underground filling body connection and filling body strength design requirements.
--- Part 6.Technical requirements for support in the waiting area. The purpose is to improve the standardization and reliability of support in the waiting area and to ensure the safety of personnel in the waiting area.
Operation safety and ventilation system reliability; clarify the support methods, design requirements, and operation processes of the waiting area to reduce the subsidence of the roof before filling.
Improve the surface control effect, reduce the difficulty of working face roof management; ensure the integrity of the roof in the charging area, thereby improving the isolation effect
and work efficiency.
Coal mine paste filling
Part 1.Technical requirements for isolation of goaf in fully mechanized mining face
1 Scope
This document specifies the isolation equipment, isolation materials, isolation process requirements for the isolation process of the goaf area of the fully mechanized coal mining face with paste filling in coal mines.
Requirements, safety technical requirements, etc.
This document is applicable to the isolation of goaf areas in comprehensive mechanized paste filling in coal mines.
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
AQ1043 Mining Product Safety Signs and Labels
HG/T 2580 Determination of tensile strength and elongation at break of rubber or plastic coated fabrics
MT/T 113 General test methods and judgment rules for flame retardancy and antistatic properties of polymer products used in underground coal mines
MT/T 542 Monolithic pillar shoe
MT/T 548 Specification for the use of single hydraulic props
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Middle isolation bracket middleisolationbracket
The cutting holes are arranged along the fully mechanized mining and filling working face, which has the function of supporting and protecting the coal mining operation space with the traditional middle support and plays the role of coal mining operation.
The filling coal mining equipment is used to isolate the area from the area to be filled, the top and bottom plates and the adjacent frames to prevent the paste filling material from overflowing.
3.2
Both ends isolation bracket
Arranged in the mining tunnels at both ends of the fully mechanized mining and filling working face, it has the function of protecting the coal mining operation with the traditional end support and plays the role of mining.
The filling coal mining equipment has the function of isolating the tunnel from the area to be filled, the top and bottom plates, and the middle isolation support to prevent the paste filling material from overflowing.
4 Isolation equipment and isolation materials
4.1 Isolation equipment
4.1.1 Middle isolation bracket
The middle isolation support is composed of the middle basic support and the middle partition mechanism, among which the basic support is mostly a four-column support hydraulic support.
The beam generally includes the front beam, the main beam and the rear beam. The front beam protects the coal mining machine operation area, the main beam mainly controls the roof sinking, and the maintenance personnel
The partition mechanism is installed on the rear side of the main top beam on the basis of the basic support and is perpendicular to the
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of NB/T 11434.1-2023_English be delivered?Answer: Upon your order, we will start to translate NB/T 11434.1-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of NB/T 11434.1-2023_English with my colleagues?Answer: Yes. The purchased PDF of NB/T 11434.1-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|