|
US$329.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
NB/T 10961-2022: Coal mine equipment remanufacturing - Process quality management requirements
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| NB/T 10961-2022 | English | 329 |
Add to Cart
|
3 days [Need to translate]
|
Coal mine equipment remanufacturing - Process quality management requirements
| Valid |
NB/T 10961-2022
|
PDF similar to NB/T 10961-2022
Basic data | Standard ID | NB/T 10961-2022 (NB/T10961-2022) | | Description (Translated English) | Coal mine equipment remanufacturing - Process quality management requirements | | Sector / Industry | Energy Industry Standard (Recommended) | | Classification of Chinese Standard | J00 | | Classification of International Standard | 25.040 | | Word Count Estimation | 14,138 | | Date of Issue | 2022-05-13 | | Date of Implementation | 2022-11-13 | | Issuing agency(ies) | National Energy Administration | NB/T 10961-2022: Coal mine equipment remanufacturing - Process quality management requirements---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Coal mine equipment remanufacturing - Process quality management requirements
ICS 25.040
CCSJ00
People's Republic of China Energy Industry Standards
Quality management control requirements for mining equipment remanufacturing process
Released on 2022-05-13
2022-11-13 Implementation
Released by the National Energy Administration
table of contents
Preface III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 General requirements 2
5 Remanufacturing quality management of mining equipment 2
Appendix A (Normative) Mining Equipment Remanufacturing Quality Control System 8
Appendix B (Normative) Mining Equipment Remanufacturing Quality Management System 9
foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents"
drafting.
This document was proposed by the China Coal Industry Association.
This document is under the jurisdiction of the Science and Technology Development Department of China Coal Industry Association.
This document is drafted by. Guoneng Information Technology Co., Ltd., China Shenhua Energy Co., Ltd., Huaibei Suntech Petroleum Machinery Manufacturing
Co., Ltd., Weinan Shaanxi Coal Qichen Technology Co., Ltd., National Energy Investment Group Co., Ltd., Shaanxi Tianyuan Intelligent Remanufacturing Co., Ltd.
Co., Ltd., Guoneng Shendong Coal Group Co., Ltd., Xi'an Intelligent Remanufacturing Research Institute Co., Ltd., China Coal Industry Association Productivity
promotion center.
The main drafters of this document. Zhang Qi, Xu Huijun, Pan Tao, Guan Zhaofang, Xu Wenquan, Di Guangyi, Wang Cunfei, Yang Yang, Zhang Peng, Zhang Yi, Cui Liming,
Liu Wenfeng, Wang Xin, He Guangdong, Shi Xiaohong, Wu Xiaohua, Guo Wei.
Quality management control requirements for mining equipment remanufacturing process
1 Scope
This document specifies the terms and definitions, general requirements, and quality management of mining equipment remanufacturing process.
This document is applicable to the quality management of coal mine equipment remanufacturing, non-coal mine equipment remanufacturing can refer to this document.
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references
For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
this document.
GB/T 27611 General Requirements and Labeling of Recycled and Remanufactured Products
GB/T 28618 General technical requirements for remanufacturing of mechanical products
GB/T 28619 Terminology for remanufacturing
GB/T 31207 Remanufacturing Quality Management Requirements for Mechanical Products
GB/T 19001 Quality Management System Requirements
3 Terms and Definitions
The following terms and definitions defined in GB/T 28619 apply to this document.
3.1
Quality control quality control
An efficient system for coordinating the quality maintenance and quality improvement efforts of people in an organization in order to produce at the most economical level
Produce products that are completely satisfactory to customers.
3.2
quality management quality management
The most economical products with use value and commerciality are produced, and the principles and methods of statistics are applied in all stages of production.
3.3
The management system that directs and controls an organization with regard to quality.
3.4
management process management process
It refers to the quality planning, quality control and quality improvement process of remanufactured products.
3.5
core process coreprocess
It refers to the design and development, manufacturing and marketing process of remanufactured products.
3.6
support process supportprocess
It is an essential process to provide support for the management process and core process in the remanufacturing production process.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of NB/T 10961-2022_English be delivered?Answer: Upon your order, we will start to translate NB/T 10961-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of NB/T 10961-2022_English with my colleagues?Answer: Yes. The purchased PDF of NB/T 10961-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|