Powered by Google www.ChineseStandard.net Database: 189760 (13 Apr 2024)

NB/SH/T 0837-2010 (NBSHT0837-2010)

NB/SH/T 0837-2010_English: PDF (NBSHT 0837-2010, NBSHT0837-2010)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
NB/SH/T 0837-2010English259 Add to Cart 3 days [Need to translate] Mineral insulating oils. Determination of kinematic viscosity at very low temperatures Valid NB/SH/T 0837-2010

Standard ID NB/SH/T 0837-2010 (NB/SH/T0837-2010)
Description (Translated English) Mineral insulating oils. Determination of kinematic viscosity at very low temperatures
Sector / Industry Energy Industry Standard (Recommended)
Classification of Chinese Standard E38
Classification of International Standard 75.140
Word Count Estimation 10,116
Date of Issue 2010-05-01
Date of Implementation 2010-10-01
Quoted Standard GB/T 265; SH 0004; ISO 3105; ASTM E1; ASTM E77; IP Petroleum and related products analysis and compilation of test method standards specifications in Appendix A IP standard thermometer; SH/T 0173
Adopted Standard IEC 61868-1998, MOD
Drafting Organization China Institute of PetroChina Karamay oil
Administrative Organization National Petroleum Products and Lubricants Standardization Technical Committee
Regulation (derived from) National Energy Board Notice No. 1 of 2010
Summary This standard specifies the transparent and opaque mineral insulating oil at least 20h after experiencing a certain constant temperature cold soak time, a certain volume of the sample was measured under the action of gravity through a capillary viscometer by the test of time to measure the temperature Movement viscosity method. 1. 2 standard applies at a constant temperature measuring kinematic viscosity of not more than 20 000 mm 2/s and Newtonian and non-Newtonian fluids, especially under low temperature conditions for the determination of kinematic viscosity liquids. At low temperature (-40 ~ C) or temperature between cloud point and pour point (typically -20��C), between some of the liquid in the full cooling may occur under conditions of high viscosity.

Standards related to: NB/SH/T 0837-2010