Chinese Standards Shop Partner of Google-Books Database: 169759 (May 19, 2019)

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Status	Related Standard
NB/SH/T 0518-2016	English	619	Add to Cart	Days<=5	Standard test method for evaluation of load-capacity capacity of lubricants under conditions of low speed and high torque used for final hypoid drive axles	Valid	NB/SH/T 0518-2016
NB/SH/T 0518-2016	Chinese	34	Add to Cart	<=1-day	[PDF from Chinese Authority, or Standard Committee, or Publishing House]

Detail Information of NB/SH/T 0518-2016; NB/SH/T0518-2016
Description (Translated English): Standard test method for evaluation of load-capacity capacity of lubricants under conditions of low speed and high torque used for final hypoid drive axles
Sector / Industry: Energy Industry Standard (Recommended)
Classification of Chinese Standard: E34
Classification of International Standard: 75.100
Word Count Estimation: 31,38
Date of Issue: 2016-12-05
Date of Implementation: 2017-05-01
Older Standard (superseded by this standard): SH/T 0518-1992
Quoted Standard: GB 1922-2006; GB/T 17754-2012; ASTM D235
Drafting Organization: China Petroleum & Chemical Corporation Petrochemical Research Institute
Administrative Organization: National Petroleum Products and Lubricants Standardization Technical Committee Petroleum Fuels and Lubricants Technical Committee
Regulation (derived from): State Energy Administration Bulletin No.9 of 2016
Summary: This standard specifies the method for assessing the oil bearing performance, wear resistance and extreme pressure performance of vehicle gears using a hypoid gear-driven axle under conditions of low speed and high torque. This test method is commonly referred to as the L-37 test. This standard applies to the assessment of vehicle gear oil bearing, anti-wear and extreme pressure performance. This standard also provides procedures for operating the L-37 Canadian cryogenic test. The L-37 transaxle Canada cryogenic test procedure is identical to the standard L-37 test procedure, except for the entries specified in Appendix D.2. The modification procedure listed in Appendix D.2 applies to the corresponding section of the L-37 standard test method.

Related standard:   NB/SH/T 0517-2014  NB/SH/T 0189-2017