Powered by Google www.ChineseStandard.net Database: 189759 (14 Apr 2024)

NB/SH/T 0474-2010 (NBSHT0474-2010)

NB/SH/T 0474-2010_English: PDF (NBSHT 0474-2010, NBSHT0474-2010)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
NB/SH/T 0474-2010English209 Add to Cart 3 days [Need to translate] Standard test method for gasoline diluent in used gasoline engine oils by gas chromatography Valid NB/SH/T 0474-2010

Standard ID NB/SH/T 0474-2010 (NB/SH/T0474-2010)
Description (Translated English) Standard test method for gasoline diluent in used gasoline engine oils by gas chromatography
Sector / Industry Energy Industry Standard (Recommended)
Classification of Chinese Standard E34
Classification of International Standard 75.100
Word Count Estimation 8,889
Date of Issue 2011-01-09
Date of Implementation 2011-05-01
Older Standard (superseded by this standard) SH/T 0474-2000
Adopted Standard ASTM D3525-2004, MOD
Drafting Organization China Petroleum & Chemical Corporation Lubricants R & D (Shanghai) Center
Administrative Organization National Petroleum Products and Lubricants Standardization Technical Committee
Regulation (derived from) National Energy Board Notice No. 1 of 2011
Summary This standard specifies the gas chromatographic determination of diluted oil in the gasoline content in gasoline. 1. 2 pairs of the measured gas content range of dilution of the sample is not limited, as long as the sample and internal standard GC content within the range of detection. 1. 3 standard limits configured using hydrogen flame detector and temperature-programmed functions with a gas chromatograph. NOTE: Using a configuration detector and he has also been reported, but the present method applies only to the specified accuracy of the instrument. 1. 4 For the gelled gasoline engine oil, this standard has not conducted its repeatability and reproducibility sufficient investigation to confirm its feasibility. Gelled gasoline engine oil is still under denaturing of oil, but a slight stirring in the recoverability of its liquidity. 1. 5 standard adopts the International System of Units (SI) units. 1. 6 standard deals with the standard use of certain security issues. However, all of the safety issues are not intended to make recommendations. Thus, the user of this standard to establish appropriate safety and health practices and determine the applicability of the management system.

Standards related to: NB/SH/T 0474-2010