HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

LY/T 1008.2-2004 English PDF

US$239.00 ยท In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
LY/T 1008.2-2004: Horizontal cross veneer slicer-Part 2: Precision
Status: Obsolete
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
LY/T 1008.2-2004English239 Add to Cart 2 days [Need to translate] Horizontal cross veneer slicer-Part 2: Precision Obsolete LY/T 1008.2-2004

PDF similar to LY/T 1008.2-2004


Standard similar to LY/T 1008.2-2004

LY/T 3022   LY/T 1346   SL 470   LY/T 1011   LY/T 1005   LY/T 1008   

Basic data

Standard ID LY/T 1008.2-2004 (LY/T1008.2-2004)
Description (Translated English) Horizontal cross veneer slicer-Part 2: Precision
Sector / Industry Forestry Industry Standard (Recommended)
Classification of Chinese Standard B97
Classification of International Standard 65.060.80
Word Count Estimation 6,641
Date of Issue 2004-11-03
Date of Implementation 2004-12-01
Older Standard (superseded by this standard) LY/T 1009-1991
Regulation (derived from) State Forestry Administration Notice 2013 No. 8; industry standard filing Notice 2013 No. 5 (total 161)
Summary This standard specifies the horizontal lateral chipping machine geometric accuracy and precision of the test items and work tolerance values. This standard applies to processing and artificial veneer Sliced ??veneer horizontal lateral chipping machine.

LY/T 1008.2-2004: Horizontal cross veneer slicer-Part 2: Precision

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Horizontal cross veneer slicer-Part 2. Precision ICS 65.060.80 B97 People's Republic of China Forestry Industry Standard Replacing LY/T 1009-1991 Horizontal horizontal cutting machine Part 2. Accuracy Released on November 11,.2004 Implementation of.2004-12-01 State Forestry Administration released

Foreword

LY/T 1008 "Horizontal Horizontal Planer" is divided into three parts. --- Part 1. Parameters; --- Part 2. Accuracy; --- Part 3. Manufacturing and acceptance technical conditions. This part is the second part of LY/T 1008. This part replaces LY/T 1009-1991 "Vertical Planer Precision". The main changes in this section compared with LY/T 1009-1991 are as follows. ---The work accuracy test is changed from two thickness size segments to four thickness size segments; --- Increased the precision tolerance value of the geometric accuracy project. This part is proposed and managed by the National Technical Committee for Wood-based Panel Machinery Standardization. This section drafted by. Shandong Gongyou Group Co., Ltd. The main drafters of this section. Dong Yanwen, Tao Shaowen. The previous versions of the standards replaced by this section are. ---LY/T 1009-1991. Horizontal horizontal cutting machine Part 2. Accuracy

1 Scope

This part of LY/T 1008 specifies the inspection items and tolerance values for the geometric accuracy and working accuracy of the horizontal transverse planer. This section applies to horizontal transverse planers for processing sliced veneers and artificial veneers.

2 requirements

2.1 Before the acceptance test, the horizontal transverse planer should be placed in a natural leveling state, and the reading of the level should not exceed 0.1/1000. 2.2 If the measurement cannot be made according to the specified length, it can be converted according to the maximum length. When the conversion result is less than 0.01mm, it is still pressed. 0.01mm meter. 2.3 When using the test method different from this part, the test accuracy should not be lower than the accuracy of the test method specified in this part.

3 Accuracy and test methods

3.1 Geometric accuracy and test methods, see Table 1. Table 1 Geometric accuracy and test method in millimeters Serial number inspection item diagram inspection method inspection tool tolerance G1 Tool holder loading plane Straightness Placed in the longitudinal direction of the loading plane Test the flat ruler so that both ends of the flat ruler Gap phase between the planes Etc., measure the flat ruler and load with a feeler gauge. The gap between the knife planes, the most Large values are measured values. Flat ruler Feeler 1000.0.08 G2 Pressure gauge mount pressure gauge Flat straightness Put it in the longitudinal direction of the plane of the pressure gauge Set the flat ruler and make the ruler two Between the end and the plane of the pressure gauge Equal gap, measure flat feet with feeler Between the plane with the pressure gauge The gap is taken as the measured value. Flat ruler Feeler 1000.0.08

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of LY/T 1008.2-2004_English be delivered?

Answer: Upon your order, we will start to translate LY/T 1008.2-2004_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of LY/T 1008.2-2004_English with my colleagues?

Answer: Yes. The purchased PDF of LY/T 1008.2-2004_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.