Powered by Google-Search & Google-Books Chinese Standards Shop Database: 169759 (Nov 17, 2019)
 HOME   Quotation   Tax   Examples Standard-List   Contact-Us   View-Cart
  

JT/T 496-2004

Chinese Standard: 'JT/T 496-2004'
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusRelated Standard
JT/T 496-2004English220 Add to Cart 0--15 minutes. Auto immediate delivery. High-density polyethylene silicon duct for highway communication conduit Obsolete JT/T 496-2004

 JT/T 496-2004 -- Click to view the ACTUAL PDF of this standard (Auto-delivered in 0~10 minutes) In 0~10 minutes time, full copy of this English-PDF will be auto-immediately delivered to your email. See samples for translation quality.  
Detail Information of JT/T 496-2004; JT/T496-2004; JTT 496-2004; JTT496-2004
Description (Translated English): High-density polyethylene silicon duct for highway communication conduct
Sector / Industry: Highway & Transportation Industry Standard (Recommended)
Classification of Chinese Standard: P66
Classification of International Standard: 23.040.20; 93.080.30
Word Count Estimation: 21,000
Date of Issue: 2004-03-17
Date of Implementation: 2004-06-01
Quoted Standard: GB/T 191-2000; GB/T 1039-1992; GB/T 1408.1-1999; GB/T 1842-1999; GB/T 2411-1980; GB/T 2828-1987; GB/T 2918-1998; GB/T 3682-2000; GB/T 5470-1985; GB/T 6671-2001; GB/T 8804.2-1988; GB/T 8806-1988; YD/T 841-1996
Adopted Standard: ASTM D3485-1997, NEQ; Bellcores TR-NWT-000356, NEQ; NEMA TC7-1990, NEQ
Drafting Organization: Ministry of Transportation Highway Research Institute
Administrative Organization: National Traffic Engineering Facility (highway) Standardization Technical Committee
Regulation (derived from): Communications Standardization 2004 5
Summary: This standard specifies the highway underground communications silicon core pipe high density polyethylene plastic pipe (referred silicon core pipe) product classification, nomenclature, technical requirements, test methods, inspection rules, and labeling, packaging, transportation and storage. This standard applies to highway traffic light laying underground cable with high-density polyethylene plastic protective silicon core pipe, porous high-density polyethylene plastic pipe combination can be implemented by reference. This standard does not apply to outdoor direct exposure to sunlight optical communications, cable protection tube.

JT/T 496-2004
JT
TRANSPORTATION INDUSTRIAL STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 23.040.20, ICS 93.080.30
P 66
Record Number
High-density polyethylene silicore duct for
highway communication conduit
公路地下通信管道
高密度聚乙烯硅芯塑料管
ISSUED ON. MARCH 17, 2004
IMPLEMENTED ON. JUNE 1, 2004
Issued by. Ministry of Transport of PRC
Table of Contents
Foreword ... 3 
1 Scope ... 4 
2 Normative references ... 4 
3 Product classification and naming ... 5 
4 Technical requirements ... 7 
5 Test methods... 10 
6 Inspection rules ... 15 
7 Marks, packaging, transport and storage ... 18 
Annex A ... 20 
Annex B ... 22 
Annex C ... 24 
Annex D ... 26 
Annex E ... 29 
Annex F ... 31 
References ... 34 
Foreword
The technical indexes and test methods in this Standard partially refer to
ASTM D3485-97 “Standard Specification for Coilable High Density
Polyethylene (HDPE) Cable in Conduit (CIC)”, US Bellcores TR-NWT-000356
“General Technical Requirements for Optical Cable Protective Duct” and
NEMA TC7-1990 “Smooth-wall Coilable Electrical Polyethylene Conduit”.
Annex A, Annex B, Annex C, Annex E, and Annex F are normative; Annex D is
informative.
This Standard was proposed by China Research Institute of Highway of the
Ministry of Transport.
This Standard shall be under the jurisdiction of National Technical Committee
on Transportation Engineering Facilities (Highway) of Standardization
Administration of China (SAC/TC223).
Main drafting organizations of this Standard. China Research Institute of
Highway of the Ministry of Transport
Drafting organizations of this Standard. Jiangsu Guoda Suit Complete Co., Ltd.,
Fujian Aton Plastics Co., Ltd.
Main drafters of this Standard. Han Wenyuan, Che Zhisheng, Zhang Zhiyong,
Kuang Jinhe, Chen Que, Tang Guoliang and Shan Ruimin.
High-density polyethylene silicore duct for
highway communication conduit
1 Scope
This Standard specifies product classification, designation, technical
requirements, test methods, inspection rules, marks, packaging, transport and
storage of high density polyethylene silicore duct for highway communication
conduit (hereinafter referred to as silicore duct).
This Standard is applicable to high density silicore protective duct used by
communication optical cable or cable paved under highway. For multi-pore
high density polyethylene duct, it shall use this Standard as reference.
This Standard is not applicable to protective duct used by communication
optical cable or cable which is directly exposed under sunlight.
2 Normative references
The following standards contain the provisions which, through reference in this
Standard, constitute the provisions of this Standard. For dated references,
subsequent amendments (excluding corrections) or revisions do not apply to
this Standard. However, the parties who enter into agreement based on this
Standard are encouraged to investigate whether the latest versions of these
documents are applicable. For undated reference documents, the latest
versions apply to this Standard.
GB/T 191-2000 Packaging - Pictorial marking for handling of goods
GB/T 1039-1992 Plastics - General rules for the test method of
mechanical properties
GB/T 1408.1-1999 Methods of test for electric strength of solid insulating
materials - Tests at power frequencies
GB/T 1842-1999 Test method for environmental stress - Cracking of
polyethylene plastics
GB/T 2411-1980 Plastics - Determination of hardness by means of a
durometer (shore hardness)
GB/T 2828-1987 Sampling procedures and sheets for inspection by
attributes (applicable to continuous batch product inspection)
GB/T 2918-1998 Standard atmospheres for conditioning and testing of
plastic specimens
GB/T 3682-2000 Determination of the melt mass-flow rate (MFR) and the
melt volume-flow rate (MVR) of thermoplastics
GB/T 5470-1985 Test method for brittleness temperature of plastics by
impact
GB/T 6671-2001 Thermoplastics pipe - Determination of longitudinal
reversion
GB/T 8804.2-1988 Test methods of tensile properties for thermoplastic
pipes - Polyethylene (PE) pipes
GB/T 8806-1988 Plastics piping systems - Plastics components -
Determination of dimensions
YD/T 841-1996 Plastic pipe for buried communication conduit
3 Product classification and naming
3.1 Structure
Silicore duct consists of high density polyethylene (HDPE) outer wall, color bar
on the external layer and permanent solid siliceous lubricating layer. The
structure of cross section is shown in Figure 1.
3.2 Classification
3.2.1 Classification by structure.
- Smooth solid inner wall and outer wall of silicore duct, expressed by
English capital letter S;
- Silicore duct with smooth outer wall and inner wall carried with
longitudinal rib, expressed by English letter R1;
- Silicore duct with outer wall carried with rib and smooth inner wall,
expressed by English letter R2;
- Silicore duct with outer wall and inner wall carried with rib, expressed by
English letter R3.
air-tightness of plug shall satisfy the water tightness requirements.
5 Test methods
5.1 State regulation and standard test environment
Unless otherwise specified, specimen shall be regulated for 24h at 23°C± 2°C
under the conditions stipulated in GB/T 2918-1998. Test shall be carried out
under such conditions.
5.2 Test instruments and preparation
5.2.1 The accuracy level of load sensor universal material testing machine
used in test shall be lower than grade 1 and the accuracy level of length
measuring tool, for steel ruler, not lower than grade 2 and for others, not lower
than grade 1.
5.2.2 Unless otherwise specified, the sampling and specimen preparation for
tensile test and the adjustment and operation of test machine shall be in
accordance with GB/T 1039-1992.
5.3 Appearance inspection
Visually observe the specimen under the natural light condition.
5.4 Measurement of dimensions of silicore duct
Dimensional measurement shall comply with the relevant provisions given in
GB/T 8806-1988. The measurement of length prefers the use of the flexible
rule, division of 1 mm. The measurement of outer diameter prefers the use of
vernier caliper, division of 0.02 mm. In measurement of wall thickness, the
impact of the pressure applied on the specimen to the measurement result
when using measuring tool shall be considered. In such case, the use of wall
thickness micrometer gauge with the division of 0.01 mm is preferred. The
measurement of ovality shall be in accordance with the provisions given in
Annex B.
5.5 Physical-chemical properties
5.5.1 Outer wall hardness
Cover 100 mm long silicore duct around a metal rod with appropriate outer
diameter. Put it below D Shore durometer. Measure the hardness of its outer
wall according to the method stipulated in GB/T 2411-1980. The instant
hardness displayed in durometer is taken as the measurement result. The
average of five tests is taken as the final hardness.
5.5.2 Inner wall friction coefficient
5.5.2.1 Static inner wall friction coefficient can be obtained in accordance
with the method given in Annex C.
5.5.2.2 In the condition that manufacturing process or formula improvement
scheme has been confirmed, in the case of manufacturer using the dynamic
inner wall friction coefficient for comparative test, the dynamic inner wall
friction coef......
Related standard:   JT/T 496-2018  JT/T 495-2014
   
 
Privacy   ···   Product Quality   ···   About Us   ···   Refund Policy   ···   Fair Trading   ···   Quick Response
Field Test Asia Limited | Taxed in Singapore: 201302277C | Copyright 2012-2019