HOME Cart(0) Quotation About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

JJG 924-2010 English PDF

US$329.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJG 924-2010: Verification Regulation of Tacho-Torque Measuring Device
Status: Valid

JJG 924: Evolution and historical versions

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Status	PDF
JJG 924-2010	English	329	Add to Cart	3 days [Need to translate]	Verification Regulation of Tacho-Torque Measuring Device	Valid	JJG 924-2010
JJG 924-1996	English	319	Add to Cart	3 days [Need to translate]	Verification Regulation of Tacho-Torque Measuring Device	Obsolete	JJG 924-1996

PDF similar to JJG 924-2010

Standard similar to JJG 924-2010

JJG 882 GB/T 36126 GB/T 1885 JJG 930 JJG 926 JJG 927

Basic data

Standard ID	JJG 924-2010 (JJG924-2010)
Description (Translated English)	Verification Regulation of Tacho-Torque Measuring Device
Sector / Industry	Metrology & Measurement Industry Standard
Classification of Chinese Standard	A53
Classification of International Standard	17.100
Word Count Estimation	14,128
Date of Issue	2010-12-30
Date of Implementation	2011-07-01
Older Standard (superseded by this standard)	JJG 924-1996
Quoted Standard	JJG 769-2009; JJG 105-2000; JJF 1011-2006; JJF 1156-2006; JB/T 6876-1993; JB/T 6877-1993
Regulation (derived from)	AQSIQ Announcement No. 3 of 2011
Issuing agency(ies)	General Administration of Quality Supervision, Inspection and Quarantine
Summary	This standard applies to torque and speed measurement device initial verification, testing and use of follow-up inspection.

JJG 924-2010: Verification Regulation of Tacho-Torque Measuring Device

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Verification Regulation of Tacho-Torque Measuring Device State verification procedures People's Republic of China Torque and speed measurement device Issued on. 2010-12-30 2011-07-01 implementation The State Administration of Quality Supervision, Inspection and Quarantine released Torque and speed measuring device verification procedures Device Replacing JJG 924-1996 The regulations by the State Administration of Quality Supervision, Inspection and Quarantine approved on December 30, 2010, and from From July 1, 2011 implementation. Focal point. the National Technical Committee on Metering hardness force value Main drafting unit. Shanghai Institute of Measurement and Testing China Institute of Metrology China Shipbuilding Industry Corporation seventh Research Institute ○ four Participated in the drafting. Kunshan Innovative Testing Technology Co., Ltd. Wenling City Electric Machinery Factory This procedure hardness values measured force commissioned by the National Technical Committee is responsible for interpretation The main drafters of this procedure. India Baojing (Shanghai Institute of Measurement and Testing) As Yong (Shanghai Institute of Measurement and Testing) Guo Bin (China Institute of Metrology) Li Tao (China Shipbuilding Industry Corporation seventh ○ four Institute) Drafters participate. Shi Wei (Shanghai Institute of Measurement and Testing) Taoze Cheng (Kunshan Innovative Testing Technology Co., Ltd.) Maoju Fu (Wenling City Electric Machinery Factory)

1 Scope (1) 2. Referenced Documents (1) 3 Overview (1) 4 metering performance requirements (1) 5 General Requirements (2) 5.1 Appearance and installation requirements (2) 5.2 Electrical safety (2) 5.3 Functional requirements (2) 6 Control of measuring instruments (2) 6.1 Verification condition (2) 6.2 test items and test methods (3) 6.3 Verification Results Processing (6) 6.4 test cycle (6) Appendix A torque and speed measurement device calibration record format (7) Appendix B torque and speed measurement device test certificate page format (9) Appendix C torque and speed measurement device test results in the notice page format (10) Torque and speed measuring device verification procedures

1 Scope

The order applies to torque and rotational speed measurement device initial verification, subsequent verification and in-service inspection.

2 Citations

This procedure references the following documents. JJG 769-2009 torque standard machine test procedures JJG 105-2000 tachometer test procedures JJF1011-2006 force value and hardness measurement terms and definitions JJF1156-2006 shock and vibration speed measurement terms and definitions JB/T 6876-1993 torque and speed sensor JB/T 6877-1993 torque and speed measuring instrument Should pay attention to the use of this procedure by using the currently valid version of the documents cited.

3 Overview

Torque and speed measuring device by the torque and speed sensor (hereinafter referred to as sensors) and the torque and speed measuring instrument (hereinafter Referred meter) components. Sensors in series to the measured rotating shaft, the torque and speed measurement by measuring instrument Measurement and display, and press the power function op display mechanical power. Its value is measured by measuring the torque sensor Torsional deformation of the torsion bar bearing the resulting signal is processed by the measuring device is converted to a torque value; measuring the rotational speed values with a frequency Counting method. The sensor device is generally divided into magnetic phase, photoelectric phase type, strain and so on.

4 metering performance requirements

Torque and speed measurement of performance measuring device shall comply with the requirements of Table 1. Metering performance requirements for torque and speed measuring device 1 Reference accuracy class 0.1 0.2 0.5 1 1 Torque Zero drift (% FS) ± 0.02 ± 0.04 ± 0.10 ± 0.20 2 back to zero torque difference (% FS) ± 0.01 ± 0.02 ± 0.05 ± 0.10 3 shows the static torque error (% FS) ± 0.10 ± 0.20 ± 0.50 ± 1.00 4 static torque repeatability (% FS) 0.10 0.20 0.50 1.00 5 speed Zero drift (% FS) ± 0.02 ± 0.04 ± 0.10 ± 0.20 6 speed back to zero difference (% FS) ± 0.01 ± 0.02 ± 0.05 ± 0.10 7 illustrates the speed error (% FS) ± 0.10 ± 0.20 ± 0.50 ± 1.00 8 speed Repeatability (% FS) 0.10 0.20 0.50 1.00

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJG 924-2010_English be delivered?

Answer: Upon your order, we will start to translate JJG 924-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJG 924-2010_English with my colleagues?

Answer: Yes. The purchased PDF of JJG 924-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version JJG 924-2010?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JJG 924-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.