HOME Cart(10) Quotation About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

JJG 586-2006 English PDF

US$679.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJG 586-2006: Verification Regulation of Soap Film Flow meter
Status: Valid

JJG 586: Evolution and historical versions

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Status	PDF
JJG 586-2006	English	679	Add to Cart	5 days [Need to translate]	Verification Regulation of Soap Film Flow meter	Valid	JJG 586-2006
JJG 586-1989	English	479	Add to Cart	4 days [Need to translate]	Verification Regulation of Soap Film Standard Facility on Gases Flow	Obsolete	JJG 586-1989

PDF similar to JJG 586-2006

Standard similar to JJG 586-2006

GB/T 36126 JJG 577 GB/T 1885 JJG 126 JJG 583

Basic data

Standard ID	JJG 586-2006 (JJG586-2006)
Description (Translated English)	Verification Regulation of Soap Film Flow meter
Sector / Industry	Metrology & Measurement Industry Standard
Classification of Chinese Standard	A53
Classification of International Standard	17.120
Word Count Estimation	26,290
Date of Issue	2006-09-06
Date of Implementation	2007-03-06
Older Standard (superseded by this standard)	JJG 586-1989
Quoted Standard	JJF 1015-2002; JJF 1016-2002; GB/T 12810-1991; JB/T 9329-1999; GB/T 17626.2-1998
Issuing agency(ies)	General Administration of Quality Supervision, Inspection and Quarantine
Summary	This standard applies to soap film flowmeter type evaluation (prototype test), initial verification, testing and use of follow-up inspection.

JJG 586-2006: Verification Regulation of Soap Film Flow meter

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Verification Regulation of Soap Film Flow meter National Metrology Verification Regulations of the People's Republic Soap film flowmeter Released on.2006-09-06 2007-03-06 implementation The General Administration of Quality Supervision, Inspection and Quarantine issued Soap film flowmeter verification procedures Film Flow meter Replace JJG 586-1989 This regulation was approved by the General Administration of Quality Supervision, Inspection and Quarantine on September 6,.2006, and It will take effect on March 6,.2007. Focal Point. National Traffic Capacity Measurement Technical Committee Main drafting unit. China Institute of Metrology Beijing Institute of Metrology and Measurement Science Participated in the drafting unit. Zhejiang Institute of Quality and Technical Supervision and Testing Liaoning Institute of Metrology Qingdao Hengyuan Instrument Co., Ltd. Shenyang Beixing Flow Meter Factory Wuhan Tianhong Intelligent Instrument Factory This regulation entrusts the National Traffic Capacity Measurement Technical Committee to explain The main drafters of this procedure. Xu Yinghua (China Institute of Metrology) Yang Youtao (Beijing Institute of Metrology and Measurement Science) Participate in the drafters. Shen Wenxin (Zhejiang Institute of Quality and Technical Supervision and Testing) Chen Mei (Liaoning Institute of Metrology) Wang Yizheng (Qingdao Hengyuan Instrument Co., Ltd.) Chen Ping (Shenyang Beixing Flow Meter Factory) Tang Lei (Beijing Institute of Metrology and Measurement Science) Li Hongjie (Wuhan Tianhong Intelligent Instrument Factory)

1 Scope (1) 2 Citations (1) 3 Overview (1) 3.1 Use (1) 3.2 Structure type (1) 3.3 Working principle (1) 4 Metrological performance requirements (2) 4.1 Accuracy level and maximum allowable error (2) 4.2 Repeatability (2) 5 General technical requirements (2) 5.1 Appearance (2) 5.2 Technical requirements (3) 6 measuring instrument control (4) 6.1 Type Evaluation (4) 6.2 First verification, subsequent verification and in-use inspection (4) 6.3 Processing of verification results (9) 6.4 Verification cycle (9) Appendix A Type Evaluation Outline (10) Appendix B Soap Membrane Gas Flow Standard Device (15) Appendix C Additional Conditions for Class 0.5 Flow Meters (16) Appendix D Additional Errors in Soap Membrane Flowmeters (17) Appendix E Distilled Water Density Table (18) Appendix F Specifications and reference dimensions of soap tube (19) Appendix G dn Numerical Table (20) Appendix H Format of verification certificate and verification result page (21) Soap film flowmeter verification procedures

1 Scope

This procedure is applicable to the type evaluation (prototype test), initial verification, subsequent verification and use of soap film flowmeter. test.

2 Citations

The provisions of the following standards and procedures constitute provisions of this regulation by reference. JJF1015-2002 General specification for type evaluation and type approval of measuring instruments JJF1016-2002 Guidelines for the preparation of type evaluation guides for measuring instruments GB/T 12810-1991 Laboratory glass instrument glass measuring device capacity calibration and use method JB/T 9329-1999 Basic environmental conditions and test methods for instrumentation transportation, transportation and storage GB/T 17626.2-1998 Electromagnetic compatibility test and measurement technology Electrostatic discharge immunity test When using this procedure, care should be taken to use the current valid version of the above cited documents.

3 Overview

3.1 Use A soap membrane flow meter (hereinafter referred to as a flow meter) is a flow meter that measures the flow rate of a small gas. Direct reading glass Tube soap membrane flowmeter (hereinafter referred to as soap membrane flowmeter) and a soap membrane flowmeter with a pair of electronic sensors mounted on the soap tube (hereinafter referred to as electronic soap membrane flowmeter). Direct reading glass tube soap membrane flowmeter, the maximum flow is generally 12L/min. Electricity The sub-soap membrane flowmeter, the maximum flow rate is generally 60L/min. When the soap membrane flowmeter needs to be used as a device, it should be The relevant provisions of Appendix B. 3.2 Structure type The soap membrane flowmeter is a soap tube with a scale, and there is an air inlet under the soap tube, the lowermost end of the soap tube A rubber ball is attached, and the rubber ball is filled with a soap solution. The electronic soap membrane flowmeter is equipped with a lower limit sensing on the outer wall of the soap tube tube. And upper limit sensors are equipped with display instruments. The structure of the soap membrane flowmeter is shown in Figure 1. The structure of the electronic soap membrane flowmeter is shown in Figure 2. 3.3 Working principle As shown in Figure 1 and Figure 2, the working principle of the soap membrane flowmeter is the gas flowing out of the gas source, which is regulated by flow.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJG 586-2006_English be delivered?

Answer: Upon your order, we will start to translate JJG 586-2006_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJG 586-2006_English with my colleagues?

Answer: Yes. The purchased PDF of JJG 586-2006_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version JJG 586-2006?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JJG 586-2006 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.