HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (12 Oct 2025)

JJG 583-2010 English PDF

US$369.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJG 583-2010: Verification regulation of cupping testing machine
Status: Valid

JJG 583: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
JJG 583-2010English369 Add to Cart 3 days [Need to translate] Verification regulation of cupping testing machine Valid JJG 583-2010
JJG 583-1988English679 Add to Cart 5 days [Need to translate] Verification Regulation of Cupping Testing Machine Obsolete JJG 583-1988

PDF similar to JJG 583-2010


Standard similar to JJG 583-2010

GB/T 36126   JJG 577   GB/T 1885   JJG 159   JJG 126   

Basic data

Standard ID JJG 583-2010 (JJG583-2010)
Description (Translated English) Verification regulation of cupping testing machine
Sector / Industry Metrology & Measurement Industry Standard
Classification of Chinese Standard A53
Classification of International Standard 17.100
Word Count Estimation 16,128
Date of Issue 2010-12-30
Date of Implementation 2011-07-01
Older Standard (superseded by this standard) JJG 583-1988
Quoted Standard GB/T 4156-2007; JB/T 7408-1994; ASTM E643-2009
Regulation (derived from) AQSIQ Announcement No. 3 of 2011
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine
Summary This standard applies to Cupping Tester (hereinafter referred to as test machine) initial verification, testing and use of follow-up inspection.

JJG 583-2010: Verification regulation of cupping testing machine

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Verification regulation of cupping testing machine State verification procedures People's Republic of China Cupping test machine Issued on. 2010-12-30 2011-07-01 implementation The State Administration of Quality Supervision, Inspection and Quarantine released Cupping testing machine test procedures CuppingTesting Machine Replacing JJG 583-1988 The regulations by the State Administration of Quality Supervision, Inspection and Quarantine approved on December 30, 2010, and from From July 1, 2011 implementation. Focal point. the National Technical Committee on Metering hardness force value Main drafting unit. Iron and Steel Institute Beijing Institute of Metrology detection Participated in the drafting. Wuzhong Material Testing Machine Co., Ltd. Shanghai Measurement and Testing Technology Research Institute Beijing Aerospace Institute of Measurement and Testing Technology Principal provisions of this Regulation national force value hardness measurement technical committee responsible for the interpretation The main drafters of this procedure. Zhou Wei Song (Iron and Steel Research Institute) Chen Wu (Iron and Steel Research Institute) Han Chao (Beijing Institute of Metrology detection) Drafters participate. Wang Peking (Wuzhong Material Testing Machine Co., Ltd.) Zhang Guiren (Shanghai Institute of Measurement and Testing) Mei Hongwei (Beijing Aerospace Measurement and Testing Technology Research Institute)

table of Contents

1 Scope (1) 2. Referenced Documents (1) 3 Terms (1) 4 Overview (1) 5 metering performance requirements (1) 5.1 Dimensional tolerances (1) 5.2 ball surface roughness (1) Clamping force 5.3 (1) 5.4 verticality (1) 5.5 Erichsen value (IE) zero error (1) 5.6 Erichsen value (IE) indication error (2) 6 General Requirements (2) 7 control of measuring instruments (2) 7.1 verification Conditions (2) 7.2 Verification Project (2) 7.3 Verification Methods (3) 7.4 test results processing (4) 7.5 test cycle (4) Appendix A schematic Erichsen cupping value (5) B clamping force test device schematic appendix (6) C coaxial test device schematic appendix (7) Appendix D Erichsen value IE zero error calibration device (8) Appendix E test certificate-page format (9) Appendix F test results in the notice page format (10) Appendix G test record format (11) Cupping testing machine test procedures

1 Scope

The order applies to cupping test machine (hereinafter referred to as test machine) initial verification, subsequent verification and in-service inspection.

2 Citations

The regulations cited in the following documents. Erichsen cupping test GB/T 4156-2007 Metallic materials - Sheet and strip - JB/T 7408-1994 cupping test machine technical conditions Standard Test Method for ASTME643-09 ball punch deformation of sheet metal When using this procedure, it should pay attention to using the currently valid version of the documents cited.

3 Terms

3.1 through crack throughcrack Through crack refers to penetrate the entire thickness of the specimen crack, crack width and just make light of the crack unit Points through. 3.2 Erichsen cupping value (IE value) Erichsencuppingindex Erichsen cupping test when the crack measured punch indentation depth.

4 Overview

Cupping test machine used to test metal sheet and strip at the time of drawing forming ability to withstand plastic deformation. Tester 10kN constant force, the specimen is clamped between the die and the die pad. Spherical end punch in the role of the press load, Forming a dent in the specimen pressed into die, until the sample appears a through crack, punch displacement measured according to the concave Mark depth is the Erichsen value.

5 metering performance requirements

5.1 Size Tolerances Die and punch dimension tolerances in Table A.1. 5.2 ball surface roughness Ball surface roughness (Ra) of not more than 0.4μm. 5.3 clamping force Clamping force of 10kN, the maximum allowable indication error is ± 5%, Repeatability maximum allowable value of 5%. 5.4 verticality Face the vertical axis of the punch header portion of the sample in contact with the die pad initial verification shall be not greater than 0.15/100, Subsequent in-service inspection and verification should not exceed 0.18/100. 5.5 Erichsen value (IE) zero error

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJG 583-2010_English be delivered?

Answer: Upon your order, we will start to translate JJG 583-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJG 583-2010_English with my colleagues?

Answer: Yes. The purchased PDF of JJG 583-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version JJG 583-2010?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JJG 583-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.