HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (12 Oct 2025)

JJG 58-2010 English PDF

US$299.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJG 58-2010: Verification regulation of radius gauges
Status: Valid

JJG 58: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
JJG 58-2010English299 Add to Cart 3 days [Need to translate] Verification regulation of radius gauges Valid JJG 58-2010
JJG 58-1996English319 Add to Cart 3 days [Need to translate] Verification Regulation of Radius Gauge Obsolete JJG 58-1996
JJG 58-1984EnglishRFQ ASK 3 days [Need to translate] (Chinese Industry Standard) Obsolete JJG 58-1984

PDF similar to JJG 58-2010


Standard similar to JJG 58-2010

JJG 517   JJG 5   JJG 0061   JJG 59   JJG 62   JJF 058   

Basic data

Standard ID JJG 58-2010 (JJG58-2010)
Description (Translated English) Verification regulation of radius gauges
Sector / Industry Metrology & Measurement Industry Standard
Classification of Chinese Standard A52
Classification of International Standard 17.040
Word Count Estimation 13,137
Date of Issue 2010-05-11
Date of Implementation 2010-11-11
Older Standard (superseded by this standard) JJG 58-1996
Quoted Standard JJF 1001-1998; JJF 1130-2005; JB/T 7980-1999
Regulation (derived from) AQSIQ Announcement No. 50 of 2010
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine
Summary This standard applies to the radius of 1mm ~ 25mm radius template initial verification, testing and use of follow-up inspection.

JJG 58-2010: Verification regulation of radius gauges

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Verification regulation of radius gauges State verification procedures People's Republic of China Radius template RadiusGauges Issued on. 2010-05-11 2010-11-11 implementation The State Administration of Quality Supervision, Inspection and Quarantine released Radius model test procedures RadiusGaug es Replacing JJG 58-1996 The regulations by the State Administration of Quality Supervision, Inspection and Quarantine approved on May 11, 2010, and from From November 11, 2010 into effect. NFP. National Engineering Geometrical Parameters Measurement Technology Committee Drafting Unit. Liaoning Provincial Institute of Metrology This procedure works commissioned by the National geometric parameter measurement technology committee responsible for the interpretation The drafters of the regulations. Shao Jing (Liaoning Provincial Institute of Metrology) Shizuo De (Liaoning Provincial Institute of Metrology) Yao Xingyu (Liaoning Provincial Institute of Metrology)

table of Contents

1 Scope (1) 2. Referenced Documents (1) 3 Overview (1) 4 metering performance requirements (1) 4.1 Face surface roughness (1) 4.2 radius dimension (1) 5 General Requirements (2) 5.1 Appearance (2) 5.2 Interaction of each part (2) 6 Control of measuring instruments (2) 6.1 test equipment (2) 6.2 Verification Project (2) 6.3 Verification Methods (3) Processing 6.4 Verification Results (3) 6.5 test cycle (4) Appendix A radius dimension indication error measurement Uncertainty Evaluation (5) Appendix B group radius model number of pieces, size and assembly sequence (7) Appendix C calibration certificate and test results in the notice page format (8) Radius model test procedures

1 Scope

The order applies to a radius of 1mm ~ 25mm radius template initial verification, subsequent verification and in-service inspection.

2 Citations

JJF1001-1998 common measurement terms and definitions JJF1130-2005 geometric measurement equipment calibration Uncertainty Evaluation Guide JB/T 7980-1999 radius model When using this procedure, it should pay attention to using the currently valid version of the documents cited.

3 Overview

Radius arc template is a standard sheet having different radius, mainly in the comparison test subject arc half path. Radius template groups by male and female model, whose structure shown in Figure 1. And wherein the monolithic male model A schematic view of a female model in Figure 2.

1 Group Schematic model radius

1- male model; 2- screws or rivets; 3- protection board; 4- female model (A) a male model (b) concave template Figure 2 a schematic view of the male model and female model 1- radius; 2- width; 3- thickness; 4 - Face

4 metering performance requirements

Surface roughness of 4.1 Face The surface roughness Ra≤1.6μm face. 4.2 radius dimension

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJG 58-2010_English be delivered?

Answer: Upon your order, we will start to translate JJG 58-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJG 58-2010_English with my colleagues?

Answer: Yes. The purchased PDF of JJG 58-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version JJG 58-2010?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JJG 58-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.