HOME   Cart(1)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

JJG 557-2011 English PDF

US$509.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJG 557-2011: Verification Regulation of Standard Torque-meters
Status: Valid

JJG 557: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
JJG 557-2011English509 Add to Cart 4 days [Need to translate] Verification Regulation of Standard Torque-meters Valid JJG 557-2011
JJG 557-1988English359 Add to Cart 3 days [Need to translate] Verification Regulation of Standard Torsionmeter Obsolete JJG 557-1988

PDF similar to JJG 557-2011


Standard similar to JJG 557-2011

GB/T 36126   JJG 577   GB/T 1885   JJG 564   JJG 567   JJG 556   

Basic data

Standard ID JJG 557-2011 (JJG557-2011)
Description (Translated English) Verification Regulation of Standard Torque-meters
Sector / Industry Metrology & Measurement Industry Standard
Classification of Chinese Standard A53
Word Count Estimation 22,233
Date of Issue 2011-11-30
Date of Implementation 2012-05-30
Older Standard (superseded by this standard) JJG 557-1988
Quoted Standard JJF 1011-2006; JB/T 5483-1991
Regulation (derived from) State Administration of Quality Supervision, Inspection and Quarantine No. 202 of 2011
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine
Summary This standard applies to dial-in and other standard strain gage torque meter (hereinafter referred to as torque meter) of the initial verification, testing and use of follow-up checks.

JJG 557-2011: Verification Regulation of Standard Torque-meters

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Verification Regulation of Standard Torque-meters State verification procedures People's Republic of China Standard torque meter Issued on. 2011-11-30 2012-05-30 implementation The State Administration of Quality Supervision, Inspection and Quarantine released Torque meter standard test procedures ofStandardTorq ue-meters Replacing JJG 557-1988 The regulations by the State Administration of Quality Supervision, Inspection and Quarantine approved on November 30, 2011, and from From May 30, 2012 into effect. Focal point. the National Technical Committee on Metering hardness force value The main drafting units. China Institute of Metrology China Aerospace Science and Technology Corporation a hospital one hundred and two China Shipbuilding Industry Corporation seventh THOUSAND AND FORTY Institute Participated in the drafting unit. Shanghai Institute of Measurement and Testing Jilin Institute of Metrology China Aviation Industry Corporation Beijing Great Wall Measurement and Testing Technology Institute The study This procedure hardness values measured force commissioned by the National Technical Committee is responsible for interpretation The main drafters of this procedure. Guo Bin (China Institute of Metrology) Mei Hongwei (China Aerospace Science and Technology Corporation a hospital one hundred and two) Li Tao (China Shipbuilding Industry Corporation seventh THOUSAND AND FORTY Institute) Drafters participate. Xiao Fei (Shanghai Institute of Measurement and Testing) Qu Zhuo (Jilin Institute of Metrology) Qin Haifeng (China Aviation Industry Corporation Beijing Great Wall Measurement and Testing Technology Institute The study)

table of Contents

1 Scope (1) 2. References (1) 3 terminology and units of measurement (1) 3.1 The term (1) 3.2 symbols, meanings and units (1) 4 Overview (3) 5 metering performance requirements (3) 5.1 strain gauge torque meter, etc. (3) 5.2 dial-type torque meter (4) 6 General Requirements (4) 6.1 visual inspection (4) 6.2 torque meter set of (4) 6.3 Other technical characteristics requirements (4) 6.4 indicating instrument usage (4) 6.5 indicating instrument resolution (4) 6.6 indicating instrument replacement (5) 7 control of measuring instruments (5) 7.1 test conditions (5) 7.2 test items and test methods (5) 7.3 Verification Results Processing (9) 7.4 test cycle (9) Appendix A test flow diagram (10) Appendix B strain gauge torque meter test certificate and other standards-page format (11) Appendix C dial gauge type torque meter standard test certificate-page format (12) Appendix D strain gauge torque meter test results and other standards in the notice page format (13) Appendix E dial type torque meter standard test results in the notice page format (14) Appendix F strain gauge torque meter test records and other standard format (15) Appendix G standard dial-type torque meter calibration record format (16) Torque meter standard test procedures

1 Scope

The order applies to dial-type strain and other standard torque meter (hereinafter referred to as torque meter) initial verification, after Continued use of verification and inspection. 2. References This procedure references the following documents. JJF1011-2006 force value and hardness measurement terms and definitions JB/T 5483-1991 standard torque meter technical conditions For dated references, only the dated edition applies to this procedure; undated reference documents Member, the latest edition (including any amendments) applies to this procedure.

3 terminology and units of measurement

3.1 Terms Dial standards torque meter standardtorsionmeter Elastomer rod, indicating device for the dial indicator torque meter, also known as the standard torque meter. 3.2 symbols, meanings and units Symbols, meanings and units are shown in Table 1. Table 1 Symbols, Meaning and Unit No. experiment Types of Symbol Meaning Unit 1 A xl Torque measurement corresponding to the lower limit deformation indication (or lose Out) mV/V, Nm, mm, V, Hz, etc.

2 A r indicating torque meter resolution means

mV/V, Nm, mm, V, Hz, etc. 3 A Zr return homodyne% FS 4 A or BR Repeatability% 5 A or B Sb long-term stability% 6 A υ% difference between forward and backward 7 AE indication error% Interpolation error% within 8 A Ip 9 A Rot azimuth error% 10 A-1 j 0 ° azimuth measurement without numbers

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJG 557-2011_English be delivered?

Answer: Upon your order, we will start to translate JJG 557-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJG 557-2011_English with my colleagues?

Answer: Yes. The purchased PDF of JJG 557-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version JJG 557-2011?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JJG 557-2011 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.