HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

JJG 118-2010 English PDF

US$439.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJG 118-2010: Verification regulation of microcator
Status: Valid

JJG 118: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
JJG 118-2010English439 Add to Cart 4 days [Need to translate] Verification regulation of microcator Valid JJG 118-2010
JJG 118-1996English479 Add to Cart 4 days [Need to translate] Verification Regulation of Micro-Kator Obsolete JJG 118-1996
JJG 118-1986EnglishRFQ ASK 3 days [Need to translate] (Chinese Industry Standard) Obsolete JJG 118-1986

PDF similar to JJG 118-2010


Standard similar to JJG 118-2010

JJG 517   JJG 5   JJG 0061   JJG 658   JJG 601   JJG 117   

Basic data

Standard ID JJG 118-2010 (JJG118-2010)
Description (Translated English) Verification regulation of microcator
Sector / Industry Metrology & Measurement Industry Standard
Classification of Chinese Standard A52
Classification of International Standard 17.040
Word Count Estimation 19,144
Date of Issue 2010-06-10
Date of Implementation 2010-12-10
Older Standard (superseded by this standard) JJG 118-1996
Quoted Standard JJF 1001-1998; JJF 1059-1999; GB/T 4755-2004; GB/T 6321-2004; GB/T 22524-2008
Regulation (derived from) AQSIQ Announcement No. 59 of 2010
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine
Summary This standard applies to indexing is 0. 1��m, 0. 2��m, 0. 5��m, 1��m, 2��m, 5��m, 10��m torsion spring comparison, optical micrometer and small torsion spring torsion spring comparator (hereinafter referred to as the comparator) of initial verification, testing and use of follow-up inspection.

JJG 118-2010: Verification regulation of microcator

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Verification regulation of microcator State verification procedures People's Republic of China Torsion spring comparator Microcator Issued on. 2010-06-10 2010-12-10 implementation The State Administration of Quality Supervision, Inspection and Quarantine released Torsion spring comparator test procedures Microcator Replacing JJG 118-1996 The regulations by the State Administration of Quality Supervision, Inspection and Quarantine approved on June 10, 2010, and from From December 10, 2010 into effect. NFP. National Engineering Geometrical Parameters Measurement Technology Committee Drafting. Tianjin Institute of Supervision and Testing Weighing Jiangsu Province Institute of Metrology Metrology hospital in Guizhou Province This procedure works commissioned by the National geometric parameter measurement technology committee responsible for the interpretation The drafters of the regulations. Luray Jun (Tianjin Supervision and Testing Institute of Metrology) Wang Xin Hang (Tianjin Supervision and Testing Institute of Metrology) Tian Yong (Tianjin Supervision and Testing Institute of Metrology) Zhu crimson (Jiangsu Province Institute of Metrology) Lv Xiaojie (Guizhou Province Measurement and Testing Institute)

table of Contents

1 Scope (1) 2. Referenced Documents (1) 3 Overview (1) 4 metering performance requirements (2) 4.1 tip of the pointer or index line width and indexing plate engraved line width (2) From the indexing plate engraved lines on the surface of the surface to the tip of the pointer 4.2 (2) 4.3 Measuring head measuring surface roughness of the surface (2) Measuring force 4.4 (3) Shows the change (3) value of 4.5 spindle radial force caused 4.6 pointer or index line when stagnant swing time (4) 4.7 Indication variability (4) 4.8 Indication Error (4) 5 General Requirements (5) 5.1 Appearance (5) 5.2 Interaction of each part (5) 5.3 pointer or index mutual position of line and the sub-dial (5) 6 Control of measuring instruments (5) 6.1 Verification condition (5) 6.2 Verification Project (6) 6.3 Verification Methods (7) 6.4 Verification Results Processing (9) 6.5 test cycle (9) Appendix A Indexing is 0.1μm optical torsion micrometer indication error of measurement Uncertainty Evaluation (10) Appendix B Indexing is 0.5μm torsion spring comparator Error in Measurement Uncertainty Evaluation (12) Appendix C calibration certificate and test results notice (within the page) format (14) Torsion spring comparator test procedures

1 Scope

The order applies to indexing is 0.1μm, 0.2μm, 0.5μm, 1μm, 2μm, 5μm, 10μm of Torsion spring comparator, an optical micrometer and small torsion torsion spring comparator (hereinafter referred to as both comparator) initial verification, subsequent Verification and in-service inspection.

2 Citations

The regulations cited in the following documents. JJF1001-1998 common measurement terms and definitions JJF1059-1999 Evaluation and Expression of Uncertainty in Measurement GB/T 4755-2004 torsion spring comparator GB/T 6321-2004 torsion optical micrometer GB/T 22524-2008 small torsion spring comparator When using this procedure, it should pay attention to using the currently valid version of the documents cited.

3 Overview

Comparator is the use of a torsion spring element as size conversion and amplification or optical transmission amplification principle, the measuring rod straight Linear displacement into a pointer or index measuring instruments arcuate line in the upper corner of the displacement of the indexing plate. Its main purpose is to comparison Measurement precision parts geometry, it can also be used as gauge of certain measuring devices and other common exterior structure shown in Figure 1 ~ image 3.

1 torsion spring comparator schematic

1- pointer; 2- indexing plate; 3 - case; 4- micro screws; 5- casing; 6- probe

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJG 118-2010_English be delivered?

Answer: Upon your order, we will start to translate JJG 118-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJG 118-2010_English with my colleagues?

Answer: Yes. The purchased PDF of JJG 118-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version JJG 118-2010?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JJG 118-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.