|
US$419.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJG 1171-2019: Concrete Batching Scales
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| JJG 1171-2019 | English | 419 |
Add to Cart
|
4 days [Need to translate]
|
Concrete Batching Scales
| Valid |
JJG 1171-2019
|
PDF similar to JJG 1171-2019
Basic data | Standard ID | JJG 1171-2019 (JJG1171-2019) | | Description (Translated English) | Concrete Batching Scales | | Sector / Industry | Metrology & Measurement Industry Standard | | Classification of Chinese Standard | A53 | | Classification of International Standard | 17.100 | | Word Count Estimation | 19,116 | | Date of Issue | 2019 | | Date of Implementation | 2020-03-31 | | Issuing agency(ies) | State Administration for Market Regulation | JJG 1171-2019: Concrete Batching Scales---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Verification Regulation of Concrete Batching Scale)
National Measurement Verification Regulations of the People's Republic of China
Concrete batching scale
Published on December 31,.2019
2020-03-31 Implementation
Issued by the State Administration of Market Supervision and Administration
Verification Regulation of Concrete Batching Scale
Centralized unit. National Weighing Measurement Technical Committee Automatic Weighing Sub-Technical Committee
Main drafting unit. Qingdao Institute of Metrology and Technology
Chinese Academy of Metrology
Shandong Institute of Metrology
Hechi Metrology and Testing Institute
Participated in the drafting unit. Shandong Boshuo Electronics Co., Ltd.
Qingdao New Construction Machinery Co., Ltd.
This regulation is entrusted to the National Weighing and Metering Technical Committee Automatic Weighing Sub-Technical Committee for interpretation
The main drafters of this regulation.
Wang Junguo (Qingdao Metrology Research Institute)
Tang Yu (Chinese Academy of Metrology)
Song Shugu (Qingdao Metrology Research Institute)
Lu Xinguang (Shandong Institute of Metrology)
Wu Jinlong (Hechi Metrology and Testing Institute)
Participating drafters.
Huang Xiangting (Shandong Boshuo Electronics Co., Ltd.)
Han Tinghai (Qingdao New Construction Machinery Co., Ltd.)
table of Contents
Introduction (Ⅱ)
1 Scope (1)
2 References (1)
3 Terms and units of measurement (1)
3.1 Terminology (1)
3.2 Unit of measurement (2)
4 Overview (2)
5 Measurement performance requirements (2)
5.1 Accuracy class (2)
5.2 Maximum allowable error (2)
5.3 Index value (d) (3)
5.4 Minimum weighing (Min) (3)
5.5 Zero setting (3)
5.6 Repeatability (3)
5.7 Discrimination (3)
6 General technical requirements (3)
6.1 Measurement security (3)
6.2 Indication device and printing device (3)
6.3 Weighing unit (3)
6.4 Installation (4)
6.5 Descriptive signs (4)
6.6 Verification mark (4)
7 Control of measuring instruments (4)
7.1 Verification conditions (4)
7.2 Verification items (6)
7.3 Verification method (6)
7.4 Processing of verification results (8)
7.5 Verification period (8)
Appendix A Verification Record Format (Recommended) (9)
Appendix B. Internal page format of certification certificate (recommended) (12)
Appendix C Format of the inner pages of the notice of verification results (recommended) (13)
Introduction
The preparation of this regulation is based on the actual situation of my country's concrete batching scale, referring to GB/T 10171-2016
Related technical requirements and OIMLR612004 (E) of "Construction Machinery and Equipment Concrete Mixing Station (Building)"
Relevant content of "Automatic Gravity metric weighing instruments" (according to
JJF1002-2010 "National Metrology Verification Regulations Writing Rules" rules.
This regulation is issued for the first time.
Verification Regulation of Concrete Batching Scale
1 Scope
This regulation is applicable to the first verification, subsequent verification and in-use inspection of the concrete batching scale in automatic weighing mode.
The concrete batching scale in this specification does not include the batching system of continuous concrete mixing plants (buildings).
2 Reference documents
This regulation refers to the following documents.
JJF1181 Terms and Definitions of Weighing Instruments
GB/T 10171-2016 Construction machinery and equipment concrete mixing plant (building)
OIMLR612004 (E) Gravity automatic filling scale [Automaticgravimetricfilingin-
struments]
For dated references, only the dated versions are applicable to this Regulation; for those without dates
The latest version (including all amendments) is applicable to this regulation.
3 Terms and units of measurement
3.1 Terminology
The terms used in this regulation are consistent with JJF1181, and some terms are cited for ease of use and understanding.
And added special terminology only applicable to this regulation.
3.1.1 Automatic gravity weighing instrument (quantitative automatic weighing instrument) automaticgravimetricfiling
instrument(quantitativeautomaticweighinginstrument)
The bulk material is divided into pre-determined and practically constant-quality loads, and the loads are loaded into the container's automatic weighing instrument.
3.1.2 Concrete batching scales
With one or more weighing units to quantify one or more bulk materials (aggregate, powder and liquid)
Weighing, forming separate loads with predetermined mass and independent of each other, and outputting and displaying these separate loads
And (or) automatic weighing instruments that print these load indications.
Note. The concrete batching system is composed of multiple batching scales, such as a concrete mixing plant.
3.1.3 Weighing unit
In an automatic weighing instrument, a device that provides weighing information for a load.
3.1.4 Loading fil
The combination of one or more separate loads constitutes a predetermined mass.
3.1.5 preset value
In order to specify the nominal value of the charge, it is preset by the operator with the aid of the charge setting device and expressed in mass units
Value.
3.1.6 Maximum permissible preset error (MPSE) maximum permissible preset value error
|