HOME   Cart(1)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

JJF 1553-2015 English PDF

US$529.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJF 1553-2015: Calibration Specification for Pendulum Tear Instruments
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
JJF 1553-2015English529 Add to Cart 4 days [Need to translate] Calibration Specification for Pendulum Tear Instruments Valid JJF 1553-2015

PDF similar to JJF 1553-2015


Standard similar to JJF 1553-2015

GB/T 36126   JJF 1368   GB/T 1885   JJF 1560   JJF 1551   JJF 1550   

Basic data

Standard ID JJF 1553-2015 (JJF1553-2015)
Description (Translated English) Calibration Specification for Pendulum Tear Instruments
Sector / Industry Metrology & Measurement Industry Standard
Classification of Chinese Standard A53
Word Count Estimation 23,293
Date of Issue 2015-12-07
Date of Implementation 2016-03-07
Quoted Standard GB/T 455-2002; GB/T 3917.1-2009; GB/T 16578.2-2009; HG/T 2581.2-2009; ISO 1974-2012; TAPPI T414 OM-2012
Regulation (derived from) ?AQSIQ 2015 Nian (No.148)
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine
Summary This standard applies to the potential energy method pendulum-type tear meter (hereinafter referred to as tear meter) calibration.

JJF 1553-2015: Calibration Specification for Pendulum Tear Instruments

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Calibration Specification for Pendulum Tear Instruments National Metrological Technical Code of the People's Republic of China Calibration standard for pendulum tearing instrument 2015-12-07 released 2016-03-07 implementation State Administration of Quality Supervision, Inspection and Quarantine issued Calibration standard for pendulum tearing instrument Unit. National force hardness measurement technology committee The main drafting unit. Zhejiang Institute of Metrology Shanghai Institute of Metrology and Testing Technology Participated in the drafting unit. Hangzhou Light Railcom Brocade Automation Technology Co., Ltd Laizhou Electronic Instrument Co., Ltd Zhejiang Geotechnical Instrument Manufacturing Co., Ltd This specification entrusts the National Strength Hardness Metrology Technical Committee to explain The main drafters of this specification. Zeng Limin (Zhejiang Institute of Metrology) Ni Shouzhong (Zhejiang Institute of Metrology) Gong Zhenhua (Shanghai Institute of Metrology and Testing Technology) Participate in the drafters. Yang Ying (Zhejiang Institute of Metrology) Pan Yong (Hangzhou Light Brocade Automation Technology Co., Ltd.) Zhang xuebo (Laizhou Electronic Instrument Co., Ltd.) Chen Zhiming (Zhejiang Geotechnical Instrument Manufacturing Co., Ltd.)

table of Contents

Introduction (II) 1 Scope (1) 2 References (1) 3 terms and units of measurement (1) 3.1 Terms (1) 3.2 Symbols, units and definitions (2) 4 Overview (3) 5 Metrological characteristics (3) 6 Calibration conditions (3) 6.1 Environmental conditions (3) 6.2 Other conditions (4) 6.3 Calibration device (4) 7 Calibration items and calibration methods (4) 7.1 Check before calibration (4) 7.2 Zero change (5) 7.3 Indication error and indication repeatability (5) 8 Calibration results (7) 9 re-school time interval (7) Appendix A Tearness meter calibration record (8) Appendix B Tearness Meter Calibration Certificate Page Format (10) Appendix C Methods and Examples of Uncertainty Measurement of Tearness Measurement (11)

Introduction

This specification is prepared according to JJF 1071-2010 "National Metrological Calibration Rules". This specification in the development process with reference to the JJF (textile) 049-2012 "pendulum fabric tearing instrument calibration norms" JJG (light industry) 63-2000 "paper and cardboard tearing instrument"; quoted GB/T 455-2002 "paper and cardboard tear Determination of the degree of "GB/T 3917.1-2009" Tear properties of textile fabrics Part 1. Impact pendulum tearing Determination of tear strength ", GB/T 16578.2-2009" Determination of tear resistance of plastic films and sheets Section 2 Part; Elmendorf method ", industry standard HG/T 2581.2-2009" rubber or plastic coating Determination of tear resistance of woven fabrics - Part 2. Impact pendulum method and ISO 1974-2012 paper tear (Paper-Determinationoftearingresistance-Elmendorfmethod), & lt; RTI ID = 0.0 & gt; American pulp and paper industry technical association TAPPIT414om-12 "paper tear" (Internaltearingre- standards and symbols, and related technical requirements, technical indicators and test methods. This specification gives calibration conditions, calibration items and calibration methods for the measurement characteristics of the pendulum tear meter. This specification is the first release. Calibration standard for pendulum tearing instrument

1 Scope

This specification applies to the potential energy method pendulum tearing instrument (hereinafter referred to as tearing instrument) calibration.

2 reference file

This specification refers to the following documents. Paper and board - Determination of tearing degree GB/T 455-2002 Textiles - Tearing properties of fabrics - Part 1. Impact pendulum method for tearing Determination Plastics - Film and sheet - Determination of tear resistance - Part 2. Mendorf (Elmendorf) method Rubber and plastics - Determination of tear resistance of coated fabrics - Part 2. Determination of tear resistance. Hit pendulum method ISO 1974-2012 Paper Teariness Determination Paper-Determinationoftearing resistanceElmendorfmethod TAPPIT414om-12 paper tear (Internaltearingresistance ofpaper) For dated references, only the dated edition applies to this specification; references that are not dated , The latest version (including all modifications) applies to this specification.

3 terms and units of measurement

3.1 terminology Tearing force Under the specified conditions, the average force required to continue tearing the specimen along the pre-cut, that is, the power consumed by tearing the specimen, The ratio of the tear length of the specimen. The unit is Newton (N). 3.1.2 Tearing degree tearingtesistance Tearing the average force required for each pre-cut specimen, that is, tearing the tear strength of the pre-cut specimen and tearing it at the same time Number of sample layers. The unit is Newton (N). 3.1.3 tear length lengthoftear Specified conditions in the specimen side of the incision, the incision terminal to the other side of the distance. The unit is in millimeters (mm). 3.1.4 pendulum capacity tearcapacityofpendulum The rated tearing force corresponding to each pendulum, that is, the maximum tearing force given by the manufacturer. The unit is Newton (N). 3.1.5 Tear initial angle initialangleoftear In the initial position, the fixture clamps the seam along the center line of the pendulum axis and the plane between the plane of the center line of the pendulum axis Angle. The unit is degrees (°).

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJF 1553-2015_English be delivered?

Answer: Upon your order, we will start to translate JJF 1553-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJF 1553-2015_English with my colleagues?

Answer: Yes. The purchased PDF of JJF 1553-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.