HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

JJF 1465-2014 English PDF

US$439.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJF 1465-2014: Calibration Specification for Screen Tension Meters
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
JJF 1465-2014English439 Add to Cart 4 days [Need to translate] Calibration Specification for Screen Tension Meters Valid JJF 1465-2014

PDF similar to JJF 1465-2014


Standard similar to JJF 1465-2014

GB/T 36126   JJF 1368   GB/T 1885   JJF 1469   JJF 1475   JJF 1466   

Basic data

Standard ID JJF 1465-2014 (JJF1465-2014)
Description (Translated English) Calibration Specification for Screen Tension Meters
Sector / Industry Metrology & Measurement Industry Standard
Classification of Chinese Standard A53
Classification of International Standard 17.100
Word Count Estimation 19,115
Date of Issue 6/15/2014
Date of Implementation 9/15/2014
Quoted Standard GB/T 5330; GB/T 9851.6; GB/T 14014; DIN 16611
Adopted Standard DIN 16611-1990, NEQ
Regulation (derived from) The State Administration of Quality Supervision, Inspection and Quarantine Notice No. 64 of 2014
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine
Summary This Standard specifies the screen tension meter calibration.

JJF 1465-2014: Calibration Specification for Screen Tension Meters

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Calibration Specification for Screen Tension Meters People's Republic of China National Metrology Technical Specifications Screen tension meter calibration specification Issued on. 2014-06-15 2014-09-15 implementation The State Administration of Quality Supervision, Inspection and Quarantine released Screen tension meter calibration specification Focal point. the National Technical Committee on Metering hardness force value Main drafting unit. Zhejiang Institute of Metrology Guangdong Provincial Institute of Metrology Participated in the drafting unit. Shanghai Institute of Measurement and Testing Anhui Institute of Metrology Shanghai Measurement and Testing Technology Co., Ltd. Dan FIG. This specification entrust national force value hardness measurement technical committee responsible for the interpretation The main drafters of this specification. Jiang Xiaobo (Zhejiang Institute of Metrology) Nishou Zhong (Zhejiang Institute of Metrology) Yang Jianwen (Guangdong Institute of Metrology) Drafters participate. Yu Yueling (Shanghai Institute of Measurement and Testing) Xu Guang (Anhui Institute of Metrology) Zhang Song (Shanghai Measurement and Testing Technology Co., Ltd. Dan FIG)

table of Contents

Introduction (Ⅱ) 1 Scope (1) 2. References (1) 3 terminology and units of measurement (1) 3.1 The term (1) 3.2 amount of symbols, units and definitions (1) 4 Overview (2) 5 Metrological characteristics (2) Calibration Condition 6 (2) 6.1 environmental conditions (2) 6.2 calibration standard device (2) 7 calibration items and calibration methods (3) 7.1 Calibration before the test (3) 7.2 Calibration method (3) 7.3 Data Processing (3) 8 calibration results expression (4) 9 Recalibration interval (4) Appendix A screen tension meter calibration records (5) B screen tension meter indication error measurement Appendix Uncertainty evaluation method and case (6) Appendix C standard screen tension device tension Uncertainty evaluation method and case (10) Appendix D A typical screen tension standard device schematic (13)

Introduction

This specification according to the rules JJF 1071-2010 "National Calibration Specifications writing rules" provisions of the preparation. This specification in the development process to fully consider the GB/T 5330-2003 "industrial woven square hole wire mesh" GB/T 9851.6-2008 "printing technology - Part 6. stencil printing terminology", GB/T 14014-2008 "Synthetic mesh", DIN16611-1990 "printing technology screen printing of money" (Printingtechnology- Measuresforscreenprinting) and other standards, terminology, symbols and definitions and related technical requirements, Technical indicators and test methods. This specification gives the screen tension meter metrological characteristics calibration conditions, calibration and calibration items method. This specification is the first release. Screen tension meter calibration specification

1 Scope

This instruction applies to screen tension meter calibration. 2. References This specification refers to the following documents. GB/T 5330 industrial woven square hole wire mesh GB/T 9851.6 printing technology - Part 6. stencil printing terminology GB/T 14014 synthetic mesh DIN16611 printing screen printing technology magnitude (Printingtechnology-Measuresforscreen printing) For dated references, only the dated edition applies to this specification; undated reference documents Member, the latest edition (including any amendments) applies to this specification.

3 terminology and units of measurement

3.1 Terms 3.1.1 Screen screenmesh An orchestration with latitude and longitude lines is made with the same size as the opening film version carrier for printing and printing production Process special mesh. 3.1.2 screen mesh meshcount Number mesh screen unit length. Units of mesh/cm (mesh/cm). 3.1.3 Screen plate-shapedprintingmesh The tensioned screen with a rigid support to a predetermined tension special mesh for screen printing. 3.1.4 screen tension meshtension Tension in uniform effect, screen mesh in cross-section by the tensile force per unit length, referred to tension. single Bit N/cm (N/cm). 3.1.5 Full-scale calibration point fulscalecalibration Theoretically screen tension tends to infinity when the screen tension meter tension instruction value. 3.2 amount of symbols, units and definitions This specification uses the amount of symbols, and units defined in Table 1.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJF 1465-2014_English be delivered?

Answer: Upon your order, we will start to translate JJF 1465-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJF 1465-2014_English with my colleagues?

Answer: Yes. The purchased PDF of JJF 1465-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.