HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

JJF 1428-2013 English PDF

US$399.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJF 1428-2013: Calibration Specification of Fiber Polarization Mode Dispersion Testers
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
JJF 1428-2013English399 Add to Cart 3 days [Need to translate] Calibration Specification of Fiber Polarization Mode Dispersion Testers Valid JJF 1428-2013

PDF similar to JJF 1428-2013


Standard similar to JJF 1428-2013

JJG 879   JJF 1106   JJG 810   JJF 2003   JJF 2002   JJF 1912   

Basic data

Standard ID JJF 1428-2013 (JJF1428-2013)
Description (Translated English) Calibration Specification of Fiber Polarization Mode Dispersion Testers
Sector / Industry Metrology & Measurement Industry Standard
Classification of Chinese Standard A60
Classification of International Standard 17.180
Word Count Estimation 17,160
Quoted Standard GB/T 18900-2002
Regulation (derived from) AQSIQ Announcement No. 122, 2013;
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine
Summary This standard applies to: Polarization Mode Dispersion Tester calibration.

JJF 1428-2013: Calibration Specification of Fiber Polarization Mode Dispersion Testers

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Calibration Specification of Fiber Polarization Mode Dispersion Testers People's Republic of China National Metrology Technical Specifications Polarization Mode Dispersion tester calibration specification Issued on. 2013-09-02 2013-12-02 implementation The State Administration of Quality Supervision, Inspection and Quarantine released Polarization Mode Dispersion tester calibration specification ModeDisp ersionTesters Focal point. the National Technical Committee on Optical metrology The main drafting units. National Telecommunication Metrology Station China Institute of Metrology Participated in the drafting unit. China Electronics Technology Group Corporation Research Institute 11 This specification committee commissioned by the National Optical measurement technology is responsible for interpreting The main drafters of this specification. Zhangying Yan (National Telecommunication Metrology Station) Yue Lei (National Telecommunication Metrology Station) Xu Nan (China Institute of Metrology) Drafters participate. Wangheng Fei (China Electronics Technology Group Corporation Research Institute 11) Fudong Bo (National Telecommunication Metrology Station)

table of Contents

Introduction (Ⅱ) 1 Scope (1) 2. References (1) 3 Terms and Definitions (1) 3.1 Polarization mode dispersion (1) 3.2 Main polarization (1) 3.3 differential group delay (1) 3.4 Polarization mode dispersion coefficient (1) 4 Overview (1) 4.1 Stokes parameters assay (SPE) Principle (1) 4.2 Interferometry (INTY) Principle (2) 4.3 Fixed assay (FA) Principle (2) 5 Metrological characteristics (3) 5.1 PMD indication error (3) 5.2 Polarization mode dispersion measurement repeatability (3) 5.3 Dynamic Range (3) 6 calibration conditions (3) Environmental conditions 6.1 (3) 6.2 calibration equipment (3) 7 calibration items and calibration methods (4) 7.1 Calibration before the appearance and function properly check (4) 7.2 calibration items (4) 7.3 Calibration method (4) 7.4 Indication and polarization mode dispersion measurement repeatability (4) 7.5 Dynamic Range (5) 8 calibration results expression (5) 9 calibration results Uncertainty Evaluation (6) Recalibration interval 10 (6) Appendix A calibration original record format (7) Appendix B Calibration Certificate page format (9) Appendix C Polarization Mode Dispersion Test Uncertainty Evaluation Examples (10)

Introduction

JJF 1071 "National Calibration Specifications writing rules", JJF 1001 "common measurement terms and definitions" JJF 1059.1 "Evaluation and Expression of Uncertainty in Measurement" together constitute the fundamental norm-setting series specifications. "Standard Test Method for single-mode fiber PMD" This specification identical with GB/T 18900-2002 in thumbnail Language, terms and definitions and Stokes parameters assay (SPE) principle of interferometry (INTY) principle, fixed points Chromatography (FA) description of the principle. The specification for the first time to develop. Polarization Mode Dispersion tester calibration specification

1 Scope

This specification applies to optical fiber polarization mode dispersion tester calibration. 2. References This specification refers to the following documents. GB/T 18900-2002 single mode fiber PMD test method For dated references, only the dated edition applies to this specification; undated reference documents Member, the latest edition (including any amendments) applies to this specification.

3 Terms and Definitions

The following terms and definitions apply to this specification. 3.1 Polarization mode dispersion polarizationmodedispersion (PMD) In the single-mode optical fiber transmission, the light of the fundamental mode with two orthogonal polarization mode. In two orthogonal polarization mode optical fiber Transmission, the group velocity of light caused by different pulse broadening. NOTE. PMD caused by pulse broadening in the digital system, causing signal distortion in an analog system. The size of the difference between the available PMD Grouping delay (DGD of) characterized, in units of ps. In the present specification PMD are DGD values shown represent. 3.2 Main polarization principalstateofpolarization (PSP) For a given time and optical frequency on single-mode fiber applications, there is always two orthogonal polarization states is called the primary partial Vibration state. NOTE. If and when a quasi-monochromatic light excites only a PSP, it will not happen because the pulse spreading due to PMD wide; when a quasi-monochromatic When the excitation light uniformity both PSP, will take place the maximum pulse spreading due to PMD wide. PSP optical output is two positive Cross polarization. When the input light frequency is slightly changed, the output does not change the polarization, the corresponding input orthogonal polarization is lost White polarization. 3.3 differential group delay differentialgropdelay (DGD) Between two PSP group delay time difference, generally with ps units. 3.4 Polarization mode dispersion coefficient polarizationmodedispersioncoefficient (PMDc) Time transmission of two orthogonal polarization mode in the unit length difference, with PMDc expressed in units of ps/km.

4 Overview

Polarization Mode Dispersion Tester for optical fiber, optical cable, optical devices production, engineering design, system and acceptance Operation and maintenance of the PMD test. Currently, commercial polarization mode dispersion measurement principle tester main Stokes parameters Number assay (SPE), interferometry (INTY) and fixed analysis (FA), can be directly measured polarization mode dispersion (PMD). Polarization mode dispersion coefficient obtained by the formula directly inside the instrument. 4.1 Stokes parameters assay (SPE) principle

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJF 1428-2013_English be delivered?

Answer: Upon your order, we will start to translate JJF 1428-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJF 1428-2013_English with my colleagues?

Answer: Yes. The purchased PDF of JJF 1428-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.