JJF 1182-2007_English: PDF (JJF1182-2007)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Related Standard | Status | PDF |
| JJF 1182-2007 | English | 1519 |
Add to Cart
|
6 days
|
Guide for Software Testing of Measuring Instruments
|
JJF 1182-2007
| Obsolete |
JJF 1182-2007
|
| Standard ID | JJF 1182-2007 (JJF1182-2007) | | Description (Translated English) | Guide for Software Testing of Measuring Instruments | | Sector / Industry | Metrology & Measurement Industry Standard | | Classification of Chinese Standard | A50;L77 | | Classification of International Standard | 17.020; 35.080 | | Word Count Estimation | 38,396 | | Date of Issue | 2007/8/21 | | Date of Implementation | 2007-11-21 | | Quoted Standard | GB/T 16260.1-2006; GB/T 16260.2-2006; GB/T 16260.3-2006; GB/T 16260.4-2006; ISO/IEC DIS 14102: 1995; OIML (TC5/SC2) D-SW(V-025): 2005; WELMEC 7.2(ISSUE1) | | Drafting Organization | Jiangsu Province metering Scientific Academy | | Administrative Organization | National Technical Committee of Legal Metrology Metering Management | | Regulation (derived from) | AQSIQ Announcement No. 142 of 2007 | | Summary | This standard provides for the application of software testing measuring instruments, level classification, pattern evaluation and assessment of the basic requirements of the preparation conditions, verification procedures and the main authentication method, measuring instruments type evaluation as a guiding document, but also as a gauge daily administration Regulatory and interest most appliance manufacturers to conduct software testing reference document. Metrological characteristics of measuring instruments for test/calibration should be performed corresponding national metrological verification or measurement and calibration specifications. | JJF 1182-2007
Guide for Software Testing of Measuring Instruments
People's Republic of China National Metrology Technical Specifications
Measuring Instruments Software Evaluation Guide
Posted 2007-08-21
2007-11-21 implementation
The State Administration of Quality Supervision, Inspection and Quarantine released
Measuring Instruments Software Evaluation Guide
Measuring
This specification by the State Administration of Quality Supervision, Inspection and Quarantine approved on August 21, 2007, and from
From November 21, 2007 into effect.
NFP. National Management Technical Committee of Legal Metrology
Main drafting unit. Jiangsu Province Institute of Metrology
Participated in the drafting. Mettler Toledo (Changzhou) Weighing Equipment System Co., Ltd.
Furen Jiangyin City, Jiangsu Province High-Tech Co., Ltd.
This specification managed by the National Technical Committee of Legal Metrology measurement responsible for interpreting
The main drafters of this specification.
WATER RESOURCES China (Jiangsu Province Institute of Metrology)
Huang Songtao (Jiangsu Province Institute of Metrology)
Drafters participate.
Dai Feng (Mettler Toledo (Changzhou) Weighing Equipment System Co., Ltd.)
Xu Dongcheng (Furen Jiangyin City, Jiangsu Province, Hi-Tech Co., Ltd.)
Feng Zhiming (Jiangsu Province Institute of Metrology)
Hu Qiang (Jiangsu Province Institute of Metrology)
Song Shu letter (Jiangsu Province Institute of Metrology)
table of Contents
Introduction (1)
1 Scope (1)
1.1 General (1)
1.2 Application (1)
2. Referenced Documents (1)
3 Terms and definitions (2)
4 measuring instruments software applications (6)
4.1 software technical characteristics of measuring instruments classification (6)
4.2 Basic requirements (7)
4.3 Specific requirements (9)
5 Measuring Instruments software level classification (16)
5.1 software design and architecture (16)
5.2 Software Protection (18)
5.3 Risk classification of measuring instruments (19)
6 type evaluation (20)
6.1 Documentation (20)
6.2 Basic requirements (20)
6.3 authentication method (21)
6.4 Verification Program (24)
7 evaluation rules formulated requirements (26)
7.1 Introduction (26)
7.2 Evaluation Requirements (26)
7.3 Evaluation Method (27)
7.4 Evaluation Results (27)
Appendix A measuring instruments (scales) Software Test Examples (28)
Measuring Instruments Software Evaluation Guide
introduction
Metrology/calibration, data processing and measurement uncertainty analysis is widely used in computer technology and measurement software,
Measurement software for measurement accuracy and reliability play a crucial role. Measuring instruments software, especially involving
And trade settlement, safety, health, environmental monitoring, resource protection, legal evaluation, measurement, etc. to justice
Reliability and ability to protect the country's legal management software for measuring instruments, increasingly national attention. Should therefore be
Measuring instruments software control to ensure metrological characteristics of measuring instruments comply with legal metrology requirements.
This guide is a reference OIMLD-SW (V-025) and WELMEC7.1 (Issue2), WELMEC7.2
(Issue1) combined with work requirements of legal metrology developed.
1 Scope
1.1 General
This guide describes the measuring instruments for testing software applications, the level of classification, evaluation, and assessment type series Details
The basic system requirements, verification procedures, and the main verification methods of measuring instruments as a guiding document for type evaluation, may be
As a measure of the daily supervision and management department of management and measurement equipment production enterprise software testing reference document.
Measuring instruments metrological characteristics of the test/calibration should be performed corresponding national metrological verification or measurement and calibration specifications.
1.2 Applications
The purpose of this guide is prepared to support the fair and consistent methods of softwar
|