HOME   Cart(3)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (25 Oct 2025)

JG/T 316-2011 English PDF

US$259.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
JG/T 316-2011: Technical requirements of instank leak-stoppage materials for remedial waterproofing
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
JG/T 316-2011English259 Add to Cart 3 days [Need to translate] Technical requirements of instank leak-stoppage materials for remedial waterproofing Valid JG/T 316-2011

PDF similar to JG/T 316-2011


Standard similar to JG/T 316-2011

GB/T 328.13   GB/T 328.15   GB/T 328.10   JG/T 414   JGJ/T 316   

Basic data

Standard ID JG/T 316-2011 (JG/T316-2011)
Description (Translated English) Technical requirements of instank leak-stoppage materials for remedial waterproofing
Sector / Industry Building & Construction Industry Standard (Recommended)
Classification of Chinese Standard Q17
Classification of International Standard 91.120.30
Word Count Estimation 10,176
Date of Issue 2011-04-18
Date of Implementation 2011-10-01
Quoted Standard GB/T 6344; GB/T 16777-2008; GB 23440; JC/T 2037; JC/T 2041-2010
Regulation (derived from) Ministry of Housing and Urban Notice No. 987
Issuing agency(ies) Ministry of Housing and Urban-Rural Development of the People's Republic of China
Summary This standard specifies the building waterproof repair rapid plugging material terms and definitions, classification, requirements and test methods. This standard applies to underground concrete structures and solid masonry structure used when leakage control the rapid sealing plugging material.

JG/T 316-2011: Technical requirements of instank leak-stoppage materials for remedial waterproofing


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Technical requirements of instank leak-stoppage materials for remedial waterproofing ICS 91.120.30 Q17 People's Republic of China building industry standards Building waterproof repair with rapid plugging material technical conditions waterproofing Posted on.2011-04-18 2011-10-01 implementation Ministry of Housing and Urban-Rural Development, People's Republic of China released

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard proposed by the Ministry of Housing and Urban Standard and Design Institute. This standard by the Ministry of Housing and Urban Construction Engineering standard technical units centralized. This standard is drafted by. China Academy of Building Research. Participated in the drafting of this standard. National Building Quality Supervision, Inspection and Engineering Center, Hangzhou Golden Waterproof Construction Engineering Co., Ltd., building research and construction Material Co., Ltd., Tsinghua University, Henan Institute of Building Materials Co., Ltd.. The main drafters of this standard. Zhang Yong, Zhang Renyu, Hu Jun, Shao Feng, Huo Sheng Xu, Zhang Mengxia, Kong Xiangming, Chen Baogui. Building waterproof repair with rapid plugging material technical conditions

1 Scope

This standard specifies the terms and definitions, classification, requirements and test methods for rapid plugging materials used in building waterproof maintenance. This standard applies to underground engineering concrete structures and solid masonry structure leakage control rapid sealing plugging material used.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 6344 Flexible Foam Polymer Materials - Determination of Tensile Strength and Elongation at Break Test method for building waterproofing coatings GB/T 16777-2008 GB 23440 inorganic waterproof plugging material JC/T 2037 acrylate grouting material Polyurethane grouting material

3 Terms and definitions

The following terms and definitions apply to this document. 3.1 Quick plugging material instantleak-stoppagematerials Use their own chemical reaction products, in a short period of time to block the leakage of water channels to stop the purpose of waterproof plugging material. 3.2 Polyurethane grouting material polyurethanegrout To polyisocyanate and polyol compounds as the main raw material, supplemented by other additives, through a certain process of preparation of the solution grouting material. 3.3 One-component water-active polyurethane grouting material one-componenthydro-activepolyurethanegrout The prepolymer prepared by the polymerization reaction of polyisocyanate and polyhydroxy compound is the main component, which is formed by reacting with water to consolidate and foam, Liquid infusion of grouting material. 3.4 Hydrophilic polyurethane grouting material hydrophilicone-componentpolyurethanegrout Consolidation of slurry and water formed by the consolidation of water-swelling properties of polyurethane grouting material, commonly known as water-soluble polyurethane grouting material. 3.5 Hydrophobic polyurethane grouting material hydrophobicone-componentpolyurethanegrout The slurry is only solidified with a fixed proportion of water reaction, the consolidated polyurethane grouting material with hydrophobic properties, commonly known as oil-soluble polyurethane grouting material. 3.6 Acrylate grouting material With acrylic acid, calcium acrylate and other acrylic monomer aqueous solution as the main agent, adding appropriate amount of crosslinking agent, accelerator, initiator, water and/or

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JG/T 316-2011_English be delivered?

Answer: Upon your order, we will start to translate JG/T 316-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JG/T 316-2011_English with my colleagues?

Answer: Yes. The purchased PDF of JG/T 316-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.