|
US$329.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
JB/T 20048-2020: Lifting charging machine
Status: Valid JB/T 20048: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| JB/T 20048-2020 | English | 329 |
Add to Cart
|
3 days [Need to translate]
|
Lifting charging machine
| Valid |
JB/T 20048-2020
|
| JB/T 20048-2005 | English | 839 |
Add to Cart
|
4 days [Need to translate]
|
Lifting charging machine
| Obsolete |
JB/T 20048-2005
|
PDF similar to JB/T 20048-2020
Basic data | Standard ID | JB/T 20048-2020 (JB/T20048-2020) | | Description (Translated English) | Lifting charging machine | | Sector / Industry | Mechanical & Machinery Industry Standard (Recommended) | | Classification of Chinese Standard | C92 | | Classification of International Standard | 11.120.30 | | Word Count Estimation | 14,185 | | Date of Issue | 2020-08-31 | | Date of Implementation | 2021-01-01 | | Older Standard (superseded by this standard) | JB/T 20048-2005 | | Regulation (derived from) | Ministry of Industry and Information Technology Announcement No. 37 (2020) | | Issuing agency(ies) | Ministry of Industry and Information Technology | JB/T 20048-2020: Lifting charging machine---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Lifting feeder)
ICS 11.120.30
C92
Record number. 81291-2021
People's Republic of China Machinery Industry Standard
Replace JB/T 20048-2005
Lifting feeder
2020-08-31 released
2021-01-01 implementation
Issued by the Ministry of Industry and Information Technology of the People's Republic of China
Table of contents
Foreword Ⅰ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Classification and marking 2
5 Requirements 2
6 Test method 4
7 Inspection rules 6
8 Marks, instructions for use, packaging, transportation and storage 8
Appendix A (Normative Appendix) Structural Stability Test 9
Appendix B (Normative Appendix) Running smoothness test 11
Foreword
This standard is to revise JB/T 20048-2005 in accordance with the rules given in GB/T 1.1-2009.
This standard replaces JB/T 20048-2005.
Compared with JB/T 20048-2005, the main technical content changes of this standard are as follows.
--- Delete basic parameters (see version 4.3 in.2005);
--- Delete environmental adaptability (see.2005 edition 5.1);
---Amendment scope (see Chapter 1, Chapter 1 of the.2005 edition);
---Modify the normative references (see Chapter 2, Chapter 2 of the.2005 edition);
--- Modify terms and definitions (see Chapter 3, Chapter 3 of the.2005 edition);
---Modify the classification and marking (see Chapter 4, Chapter 4 of the.2005 edition);
---Modify materials (see 5.1,.2005 edition 5.6);
--- Modify the appearance to surface quality (see 5.2,.2005 edition 5.5);
---Modify the static stability (see 5.3.1,.2005 version 5.3.1);
--- Modify the deflection to structural stability (see 5.3.2,.2005 edition 5.3.2);
---Modify the natural settlement (see 5.3.3,.2005 edition 5.4.2.4);
---Modify the performance to run smoothly (see 5.3.4,.2005 edition 5.2);
---Modify the no-load and full-load operation to merge into operation stability (see 5.3.4,.2005 edition 5.3.3);
--- Modify the pressure test to pressure and seal (see 5.3.5.2,.2005 edition 5.4.2.2);
--- Modify electrical safety and environmental protection as electrical safety (see 5.5,.2005 edition 5.4);
---Modify the test method (see Chapter 6, Chapter 6 of the.2005 edition);
---Modify the factory inspection (see 7.2,.2005 edition 7.2);
---Modify the type inspection (see 7.3,.2005 edition 7.3);
--- Modify the logo, label, instruction manual and packaging, transportation, and storage terms (see Chapter 8, Chapter 8 and Chapter 9 of the.2010 edition);
---Modify the deflection test to the structural stability test (see Appendix A, Appendix A of the.2005 edition);
---Modify the no-load and full-load tests as running smoothness tests (see Appendix B, Appendix B of the.2005 edition);
--- Increase the interchangeability requirements and test methods of the discharging device (see 5.3.10, 6.3.10);
--- Increase the horizontal positioning requirements and test methods of the fork frame (see 5.4, 6.4).
This standard was proposed by the China Pharmaceutical Equipment Industry Association.
This standard is under the jurisdiction of the National Pharmaceutical Equipment Standardization Technical Committee (SAC/TC356).
This standard was drafted. Zhejiang Canaan Technology Co., Ltd., Shandong Xinma Pharmaceutical Equipment Co., Ltd.
The main drafters of this standard. Fang Zheng, Xie Zhongze, Wu Wutong, Wang Hongmin, Zhou Zhendao, Gu Shi, Huang Yuanyuan, Yu Jun.
The previous versions of the standard replaced by this standard are as follows.
---JB/T 20048-2005.
Lifting feeder
1 Scope
This standard specifies the terms and definitions, classification and marking, requirements, test methods, inspection rules, signs, and instructions for lifting feeders
Books, packaging, transportation and storage.
This standard is applicable to the lifting and feeding of buckets whose lifting mass is not more than.200kg, driven by a motor to lift and rotate, and whose load is cantilevered.
Machine (hereinafter referred to as feeder).
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document.
GB/T 191 Packaging, storage and transportation pictorial signs
GB/T 1184 shape and position tolerance without tolerance value
GB/T 1804 General Tolerance Tolerance of linear and angular dimensions without tolerance
GB 2894 Safety signs and guidelines for their use
GB/T 3768-2017 Acoustic sound pressure method is used to determine the noise source power and sound energy level using the simple envelope measurement surface above the reflecting surface.
Easy method
GB/T 6388 Transport packaging receiving and dispatching signs
GB/T 9969 General Rules for the Use of Industrial Products
The generation of GB/T 10111 random number and its application in product quality sampling inspection
GB/T 10610 Product Geometric Technical Specification Surface Structure Profile Method Rules and Methods for Evaluating Surface Structure
GB/T 13306 signs
GB/T 13384 General technical conditions for packaging of mechanical and electrical products
GB/T 19142 General Rules for Export Commodity Packaging
GB/T 36035 General requirements for electrical safety of pharmaceutical machinery
MT/T 776-2004 Coal Mine Machinery Hydraulic System Assembly Factory Inspection Specification
JB/T 20087 barrel
JB/T 20188 Pharmaceutical machinery product model compilation method
3 Terms and definitions
The following terms and definitions apply to this standard.
3.1
Forkframe
A fork that supports the bucket.
3.2
Flexiblesupportingparts
Flexible rigging directly used to carry the weight of materials, buckets, forks, lifting slide components, etc.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of JB/T 20048-2020_English be delivered?Answer: Upon your order, we will start to translate JB/T 20048-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of JB/T 20048-2020_English with my colleagues?Answer: Yes. The purchased PDF of JB/T 20048-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version JB/T 20048-2020?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JB/T 20048-2020 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|