HJ 563-2010 (HJ563-2010)

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Related Standard	Status	PDF
HJ 563-2010	English	499	Add to Cart	4 days [Need to translate]	Engineering technical specification of flue gas ive non-catalytic reduction dentration for thermal power plant	HJ 563-2010	Valid	HJ 563-2010

HJ 563-2010
Engineering technical specification of flue gas ive non-catalytic reduction dentration for thermal power plant
National Environmental Protection Standard of the People's Republic
Technical specification for flue gas denitration engineering of thermal power plants
Selective non-catalytic reduction
Engineering technical specification of flue gas selective non-catalytic
Reduction denitration for thermal power plant
Published on.2010-02-03
2010-04-01 Implementation
Ministry of Environmental Protection released
Ministry of Environmental Protection
announcement
No. 14 of.2010
To implement the Environmental Protection Law of the People's Republic of China, the Law of the People's Republic of China on Prevention and Control of Atmospheric Pollution, and the Water
The Law on Pollution Prevention and Control, which regulates the construction and operation of pollution control projects, is now approved for the selective catalytic catalysis of the technical specifications for flue gas denitrification in thermal power plants.
The three standards, such as the original law, are national environmental protection standards and are issued.
The standard name and number are as follows.
1. Technical specification for catalytic denitrification of flue gas denitration engineering in thermal power plants (HJ 562-2010);
3. Technical Specifications for Leachate Treatment in Domestic Waste Landfills (Trial) (HJ 564-2010).
The above standards have been implemented since April 1,.2010 and published by the China Environmental Science Press. The standard content can be found on the website of the Ministry of Environmental Protection.
Special announcement.
February 3,.2010
Content
Foreword..iv
1 Scope..1
2 Normative references..1
3 Terms and definitions. 2
4 pollutants and pollution load. 2
5 General requirements..2
6 Process Design..3
7 Main process equipment and materials 5
8 Detection and process control..5
9 auxiliary system..6
10 Labor Safety and Occupational Health.7
11 Construction and acceptance..7
12 Operation and maintenance..8
Appendix A (informative) Raw parameters required for SNCR process design.10
Appendix B (informative) SNCR flue gas denitration process layout and typical process..11
Appendix C (informative) Liquid ammonia SNCR process and ammonia water SNCR process..13
Iv
Foreword
To implement the Environmental Protection Law of the People's Republic of China, the Law of the People's Republic of China on Prevention and Control of Atmospheric Pollution, and the Air Pollution of Thermal Power Plants
Dust emission standards, regulate the construction of flue gas denitrification projects in thermal power plants, improve the quality of the atmospheric environment, and develop this standard.
This standard specifies the technical requirements for the design, construction, acceptance, operation and maintenance of the selective non-catalytic reduction flue gas denitration project in thermal power plants.
begging.
This standard was formulated by the Science and Technology Standards Department of the Ministry of Environmental Protection.
This standard is the first release.
This standard is mainly drafted by. China Environmental Protection Industry Association, Xi'an Thermal Power Research Institute Co., Ltd., Beijing Environmental Protection Science Research
Research Institute, Southeast University, State Grid Power Technology Company, Beijing Boqi Power Technology Co., Ltd., Beijing Guodian Longyuan Environmental Protection Engineering Co., Ltd.
Tsinghua Tongfang Environmental Co., Ltd., Zhejiang Tiandi Environmental Protection Engineering Co., Ltd.
This standard was approved by the Ministry of Environmental Protection on February 3,.2010.
This standard has been implemented since April 1,.2010.
This standard is explained by the Ministry of Environmental Protection.
Technical specification for flue gas denitration engineering of thermal power plants
Selective non-catalytic reduction
1 Scope of application
This standard stipulates that the design, construction, acceptance, operation and maintenance of the selective non-catalytic reduction flue ga