HJ 2513-2012 (HJ2513-2012)

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Related Standard	Status	PDF
HJ 2513-2012	English	269	Add to Cart	3 days [Need to translate]	Technical requirement for environmental labeling products. Video cameras	HJ 2513-2012	Valid	HJ 2513-2012

HJ 2513-2012
Technical requirement for environmental labeling products.Video cameras
National Environmental Protection Standard of the People's Republic
Environmental Labeling Product Technical Requirements Camera
Technical requirement for environmental labeling products
Video cameras
Published on.2012-03-30
2012-06-01 Implementation
Ministry of Environmental Protection released
HJ □□□□-201□
Content
Foreword.3
1 Scope 4
2 Normative references 4
3 Terms and Definitions..4
4 Basic requirements 4
5 Technical content 4
6 Test method 6
Appendix A (Normative) Phthalate banned in plastic parts.7
Appendix B (Normative) Restricted use of polycyclic aromatic compounds (PAHs) .8
HJ □□□□-201□
Foreword
To implement the Environmental Protection Law of the People's Republic of China, reduce the environmental and human health of camera products during production and use.
Influence, develop this standard.
This standard is designed for camera product components such as optical lenses, batteries, chargers, plastic parts, metal parts and products.
The requirements contained in the production process and public information are required.
This standard is the first release.
This standard applies to China Environmental Labeling Product Certification.
This standard was formulated by the Science and Technology Standards Department of the Ministry of Environmental Protection.
This standard is mainly drafted by. China-Japan Friendship Environmental Protection Center, Canon (China) Co., Ltd., Tianjin Samsung Optoelectronics Co., Ltd.
Company, Matsushita Electric (China) Co., Ltd., Sony (China) Co., Ltd.
This standard was approved by the Ministry of Environmental Protection on March 30,.2012.
This standard has been implemented since June 1,.2012.
This standard is explained by the Ministry of Environmental Protection.
HJ □□□□-201□
Environmental Labeling Product Technical Requirements Camera
1 Scope of application
This standard specifies the terms and definitions, basic requirements, technical content and testing methods of the camera environmental labeling products.
This standard applies to camera products, including storage tape, semiconductor memory or semiconductor memory chips, optical discs and hard
Disk, etc., not suitable for broadcast-quality camera products.
2 Normative references
The contents of this standard refer to the terms in the following documents. For undated references, the valid version applies to this standard.
GB 20943 Single output AC-DC and AC-AC external power supply energy efficiency limit value and energy saving evaluation value
GB/T 16288 logo for plastic products
GB/T 18455 packaging recycling mark
GB/T 26572 Limit requirements for restricted substances in electrical and electronic products
SJ/T 11415 General Specification for Non-broadcast Digital Camcorders
3 Terms and definitions
The following terms and definitions apply to this standard.
Camera video camera
Through the image and sound sensors, the light and sound signals are converted into electrical signals, and the images are processed through a series of processes
And electronic devices whose sound is recorded on a storage medium (such as a magnetic tape, a magnetic disk or a memory card, a compact disk, a hard disk, etc.).
4 basic requirements
4.1 Product quality should meet the requirements of SJ/T 11415 or other corresponding standards.
4.2 Pollutant emissions from product manufacturing enterprises shall comply with the requirements of national or local pollutant discharge standards.
4.3 Product manufacturers should strengthen clean production in the production process.
5 Technical content
5.1 Product Environmental Protection Design Requirements
5.1.1 Easy to disassemble design
The product is detachable.
5.1.2 Easy to recycle design
5.1.2.1. Plastic parts with a mass exceeding 25 g or a planar surface area exceeding.200 mm2 shall use a single type of polymer or copolymerization
Object.
5.1.2.2. The type of polymer, copolymer or polymerization mixture used in the product shall not exceed 4 and is easily decomposed.
5.1.2