HJ 2505-2011

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Related Standard	Status	PDF
HJ 2505-2011	English	109	Add to Cart	2 days	Technical requirement for environmental labeling products. Mobile hard disk drive	HJ 2505-2011	Valid	HJ 2505-2011

HJ 2505-2011
Technical requirement for environmental labeling products.Mobile hard disk drive
National Environmental Protection Standard of the People's Republic
Environmental labeling product technical requirements mobile hard disk
Technical requirement for environmental labeling products
-Mobile hard disk drive
Published on.2011-03-02
2011-04-01 Implementation
Ministry of Environmental Protection released
Foreword
To implement the Environmental Protection Law of the People's Republic of China, reduce the impact of mobile hard disk on the environment and human health during production and use.
Sound, protect the environment, and develop this standard.
This standard sets environmental requirements for the design, production process, products, recycling and handling, packaging materials and public information of mobile hard drives.
This standard is the first release.
This standard applies to China Environmental Labeling Product Certification.
This standard was formulated by the Science and Technology Standards Department of the Ministry of Environmental Protection.
This standard is mainly drafted by. China-Japan Friendship Environmental Protection Center.
This standard was approved by the Ministry of Environmental Protection on March 2,.2011.
This standard has been implemented since April 1,.2011.
This standard is explained by the Ministry of Environmental Protection.
Environmental labeling product technical requirements mobile hard disk
1 Scope of application
This standard specifies the terms and definitions, basic requirements, technical content and testing methods of mobile hard disk environmental labeling products.
This standard applies to mobile hard disk products.
2 Normative references
The contents of this standard refer to the terms in the following documents. For undated references, the valid version applies to this standard.
GB/T 18455 packaging recycling mark
SJ/T 11363 Limitation requirements for toxic and hazardous substances in electronic information products
3 Terms and definitions
The following terms and definitions apply to this standard.
Mobile hard disk drive
A portable data storage device. The device is mainly used for data storage, and the magnetic medium hard disk is used as a storage carrier.
The communication method determined by the USB interface or the like is connected to a data processing device such as a computer, and the data access and management functions are conveniently completed.
4 basic requirements
4.1 Product quality should meet the requirements of the corresponding product quality standards.
4.2 Pollutant emissions from product manufacturing enterprises shall comply with national or local standards for pollutant discharge.
4.3 Product manufacturers should strengthen clean production in the production process.
5 Technical content
5.1 Product Design Requirements
5.1.1 The product adopts a detachable design.
5.1.2 DecaBDE (DBDPO) and short chain chlorinated paraffins (SCCPs) shall not be used for plastic parts in the product.
5.2 Production process requirements
The production process shall not use hydrochlorofluorocarbons (HCFCs), 1,1,1-trichloroethane (C2H3Cl3), trichloroethylene (C2HCl3),
Dichloroethane (CH3CHCl2), chloroform (CHCl3), bromopropane (C3H7Br), n-hexane (C6H14), toluene (C7H8), two
Toluene (C6H4(CH3)2).
5.3 Product requirements
Lead (Pb), cadmium (Cd), mercury (Hg), hexavalent chromium (Cr6), polybrominated biphenyls (PBBs) and polybrominated diphenyls in products and product components
The limits for six hazardous substances (PBDEs) should meet the requirements of SJ/T 11363, with the following exceptions.
a) lead in high melting point solders;
b) lead in electronic ceramic components;
c) The lead content in the steel alloy does not exceed 0.35%, the lead content in the aluminum alloy does not exceed 0.4%, and the lead content in the copper alloy does not exceed 4%.
5.4 Packaging material requirements
5.4.1 The content of vinyl chloride monomer shall not exceed 1 mg/kg.
5.4.2 Hydrochlorofluorocarbons (HCFCs) should not be used as blowing agents.
5.4.3 It should be marked in accordance with GB/T 1