|
US$469.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
HJ 1259-2022: Technical guideline for deriving hazardous waste management plans and records
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| HJ 1259-2022 | English | 469 |
Add to Cart
|
4 days [Need to translate]
|
Technical guideline for deriving hazardous waste management plans and records
| Valid |
HJ 1259-2022
|
Standard similar to HJ 1259-2022 HJ 1347.1 HJ 1347.2 HJ 1346.1 Basic data | Standard ID | HJ 1259-2022 (HJ1259-2022) | | Description (Translated English) | Technical guideline for deriving hazardous waste management plans and records | | Sector / Industry | Environmental Protection Industry Standard | | Word Count Estimation | 20,249 | | Issuing agency(ies) | Ministry of Ecology and Environment | HJ 1259-2022: Technical guideline for deriving hazardous waste management plans and records---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Technical guideline for deriving hazardous waste management plans and records
National Ecological Environment Standard of the People's Republic of China
Hazardous Waste Management Plan and Management Ledger
Develop technical guidelines
Technical guideline for deriving hazardous waste management plans and
records
Published on 2022-06-20
2022-10-01 Implementation
Released by the Ministry of Ecology and Environment
directory
Foreword...ii
1 Scope...1
2 Normative references...1
3 Terms and Definitions...1
4 General requirements...2
5 Requirements for Hazardous Waste Management Plan Development...3
6 Requirements for Hazardous Waste Management Ledger...5
7 Hazardous waste declaration requirements...6
Appendix A (Informative) Hazardous Waste Management Plan Reference Table...8
Appendix B (Informative Appendix) Hazardous Waste Management Ledger Reference Table...12
Appendix C (Informative Appendix) Hazardous Waste Declaration Report Reference Form...15
Technical Guidelines for the Development of Hazardous Waste Management Plans and Management Ledgers
1 Scope of application
This standard specifies the general procedures for the units that generate hazardous waste to formulate hazardous waste management plans, manage accounts, and declare relevant information on hazardous wastes.
requirements for the establishment of a hazardous waste management plan, requirements for the formulation of a hazardous waste management ledger, and requirements for the declaration of hazardous wastes.
This standard is applicable to instruct units producing hazardous waste to formulate hazardous waste management plans and management ledgers, and to pass the National Hazardous Waste Information
Information management system (including provincial self-built system, the same below) declares the type, production volume, flow direction,
Storage, utilization, disposal and other related information.
Hazardous waste collection units of small and micro enterprises can refer to this standard to provide hazardous waste management plans and management ledger formulation, hazardous waste declaration
and other services.
2 Normative references
This standard refers to the following documents or clauses thereof. For dated references, only the dated version applies to this standard.
For undated references, the latest edition (including all amendments) applies to this standard.
GB/T 4754 National Economic Industry Classification
GB 5085.1 Hazardous Waste Identification Standard Corrosive Identification
GB 5085.2 Hazardous Waste Identification Standard Acute Toxicity Preliminary Screening
GB 5085.3 Hazardous Waste Identification Standard Leaching Toxicity Identification
GB 5085.4 Hazardous Waste Identification Standard Flammability Identification
GB 5085.5 Hazardous Waste Identification Standard Reactive Identification
GB 5085.6 Hazardous Waste Identification Standard Identification of Toxic Substances Content
GB 5085.7 General Rules for Identification Standard of Hazardous Waste
GB 18597 Hazardous Waste Storage Pollution Control Standard
HJ 298 Technical Specification for Hazardous Waste Identification
HJ 608 Sewage discharge unit coding rules
HJ 1033 Technical Specification for Pollution Discharge Permit Application and Issuance Industrial Solid Waste and Hazardous Waste Treatment
"National Hazardous Waste List"
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1
hazardous waste
Listed in the national list of hazardous wastes or identified as having hazardous properties according to the identification standards and identification methods of hazardous wastes prescribed by the state
Solid Waste.
3.2
storage storage
Temporary placement of solid waste in a specific facility or site.
3.3
Utilize recycling
The activity of extracting substances from solid waste as raw materials or fuels.
3.4
disposal
Incinerate solid waste and use other methods to change the physical, chemical and biological properties of solid waste to reduce the amount of solid waste that has been generated
activities to reduce the amount of solid waste, reduce the volume of solid waste, reduce or eliminate its hazardous components, or place solid waste in an environmentally friendly manner
Specifies the activities of the required landfill.
4 General requirements
4.1 Basic principles
4.1.1 The unit that generates hazardous waste shall formulate a hazardous waste management plan in accordance with the classification management requirements specified in 4.3 of this standard,
The content should include measures to reduce the generation of hazardous wastes and the harm of hazardous wastes, as well as measures for storage, utilization and disposal of hazardous wastes;
Establish a hazardous waste management ledger, and truthfully record relevant information such as the type, amount of production, flow direction, storage, utilization, and disposal of hazardous waste;
The National Hazardous Waste Information Management System shall file a hazardous waste management plan with the local ecological environment authority, and declare relevant materials on hazardous waste.
4.1.2 The unit that generates hazardous waste shall fill in and record the relevant content according to the actual situation, and make sure the authenticity, accuracy and completeness of the content.
sexual responsibility.
4.2 Classification management
4.2.1 According to factors such as the quantity of hazardous wastes produced and environmental risks, the management categories of units producing hazardous wastes are classified according to the following principles.
It is a key environmental supervision unit for hazardous waste, a simplified management unit for hazardous waste, and a registration management unit for hazardous waste.
a) Key Environmental Supervision Units for Hazardous Waste
Units that meet one of the following conditions are included in the key environmental supervision units for hazardous waste.
1) A unit that produces 100 t or more of hazardous waste annually in the same production and business site.
2) Units with facilities for self-utilization and disposal of hazardous wastes.
3) Units holding hazardous waste business licenses.
b) Hazardous waste simplified management unit
Units that produce 10 t or more of hazardous waste per year in the same production and operation site and are not included in the key environmental supervision units for hazardous waste.
c) Hazardous waste registration management unit
Units that produce less than 10 tons of hazardous waste per year in the same production and operation site and are not included in the key environmental supervision units for hazardous waste.
It is stipulated that, in light of the actual situation in the region, the management categories of units that generate hazardous wastes are determined.
4.2.3 The annual production volume of hazardous wastes shall be determined according to the following methods. if it has been put into operation for 3 years, the annual production volume of hazardous wastes shall be determined according to the maximum annual volume of hazardous wastes in the past 3 years.
Confirmed; if it has been put into operation for 1 year but less than 3 years, the annual production volume of hazardous waste shall be determined according to the annual maximum amount during the operation period;
If the period of annual or intermittent generation of hazardous waste is longer than 3 years, the higher risk in the environmental impact assessment document, the copy of the pollution discharge permit and other documents shall be considered.
The amount of waste accounting is determined.
4.3 Requirements for classification management
4.3.1 The content of the hazardous waste management plan shall be determined according to the management category of the unit that produces the hazardous waste.
4.3.2 The reporting cycle for the type, amount, flow direction, storage, utilization, disposal and other relevant information of hazardous waste shall be based on the hazardous waste generated.
The management category of the unit of the object is determined.
4.3.3 Encourage qualified regions to implement integrated smart scales, video surveillance, and electronic labels in key hazardous waste environmental supervision units.
Able to monitor means, record information about hazardous wastes truthfully, and connect with the national hazardous waste information management system if conditions permit.
5 Requirements for Hazardous Waste Management Plan Development
5.1 Formulation unit
For units belonging to the same legal entity or other organization but located in different production and business sites, each production and business site shall be taken as the unit.
Separately formulate hazardous waste management plans, and report to the competent department of ecological environment where the production and operation sites are located through the national hazardous waste information management system.
Door record.
5.2 Formulation and time limit requirements
5.2.1 The unit that generates hazardous waste shall formulate a hazardous waste management plan on an annual basis.
5.2.2 The unit that generates hazardous waste shall fill in and submit the relevant information online through the National Hazardous Waste Information Management System before March 31 of each year.
For the annual hazardous waste management plan, the national hazardous waste information management system automatically generates the filing number and receipt to complete the filing.
5.2.3 If the contents of the filing of the hazardous waste management plan need to be adjusted, the unit that generates the hazardous waste shall change it in a timely manner.
5.3 General principles
5.3.1 The management plan of the key environmental supervision unit of hazardous waste should include the basic information of the unit, facility information, hazardous waste production
information on health conditions, information on storage of hazardous wastes, information on self-utilization/disposal of hazardous wastes, plans and measures for reducing hazardous wastes,
Hazardous waste diversion information.
5.3.2 The management plan formulation content of the unit for simplified management of hazardous waste shall include the basic information of the unit, information on the generation of hazardous waste, hazardous waste
Information on hazardous waste storage, hazardous waste reduction plans and measures, and hazardous waste transfer information.
5.3.3 The management plan of the hazardous waste registration management unit shall include the basic information of the unit, information on the generation of hazardous waste, hazardous waste
information on the transfer of hazardous waste.
5.4 Requirements for filling in the basic information of the unit
5.4.1 Basic information of the unit
Please refer to Appendix A.1 for the filling content of the basic information of the unit, and the filling should meet the following requirements.
a) Industry category. fill in according to the corresponding category and code in GB/T 4754.
b) Management category. refers to the key environmental supervision unit of hazardous waste, the simplified management unit of hazardous waste, or the registration management unit of hazardous waste.
5.4.2 Facility Information
Please refer to Appendix A.2 for the filling content of facility information, which should meet the following requirements.
a) Main production units, main processes, production facilities and facility parameters, product names, production capacity, raw and auxiliary materials. and pollutant discharge permits
The content stated in the certified copy shall be consistent.
b) Facility code. fill in the code stated in the copy of the pollutant discharge permit. If there is no code, code and fill in according to HJ 608.
For hazardous wastes whose production links are not fixed, select one of the facilities that produce this type of hazardous waste and fill in the code.
c) Parameters of pollution prevention and control facilities. refer to the parameters of self-utilization facilities, self-disposal facilities and storage facilities of hazardous wastes.
5.5 Requirements for filling in the basic information of hazardous wastes
5.5.1 Hazardous waste generation
Please refer to Appendix A.3 for the filling content of hazardous waste generation, and the filling should meet the following requirements.
a) Hazardous waste name, category, code and hazardous characteristics. according to the "National List of Hazardous Wastes" or according to GB 5085.1~7 and
HJ 298 Judge and fill in. If there is a common name of the industry or the internal name of the unit, fill in the common name of the industry or the internal name of the unit.
b) Names of hazardous components. names of major pollutants in hazardous wastes that are harmful to the environment, such as benzene series, cyanide, arsenic, etc.
c) Name and code of facility generating hazardous waste. the name and code of production facility filled in according to Section 5.4.2 of this standard
Fill in, it can be automatically generated by the National Hazardous Waste Information Management System.
d) Estimated production volume in the current year. the estimated amount of hazardous waste produced in the current year.
e) Measurement unit. fill in tons. If it is measured by volume such as liters and cubic meters, it should be converted into weight tons; if it is measured by number,
In addition to filling in the number, it should also be converted into weight tons.
f) Internal governance methods and whereabouts. self-use facility codes, self-disposal facility codes and storage facility codes are
The code of pollution prevention and control facilities filled in in Section 5.4.2 can be automatically generated by the national hazardous waste information management system.
5.5.2 Hazardous waste storage
5.5.2.1 Please refer to Appendix A.4 for the filling content of hazardous waste storage conditions, and the filling should meet the following requirements.
a) Hazardous waste name, category, code, hazardous component name, form, and hazardous characteristics. fill in according to Section 5.5.1 of this standard
Fill in the relevant information, which can be automatically generated by the National Hazardous Waste Information Management System.
b) Storage facility code. Fill in according to the pollution prevention and control facility code filled in Section 5.4.2 of this standard, which can be obtained from the National Hazardous Waste Information
The information management system is automatically generated.
c) Type of storage facility. fill in according to the type of storage facility in GB 18597.
d) Packaging form. including packaging container, material, specifications, etc.
e) Estimated remaining storage volume for the current year. the estimated inventory volume of hazardous wastes in storage facilities by the end of this year.
f) Measurement unit. fill in tons. If it is measured by volume such as liters and cubic meters, it should be converted into weight tons; if it is measured by number,
In addition to filling in the number, it should also be converted into weight tons.
5.5.2.2 The storage capacity of hazardous waste shall be consistent with that stated in the copy of the pollution discharge permit, or according to the environment of the unit generating the hazardous waste.
The impact assessment documents and approval opinions are determined.
5.5.3 Self-utilization/disposal of hazardous waste
5.5.3.1 Please refer to Appendix A.5 for the filling content of self-utilization/disposal of hazardous wastes, and the filling should meet the following requirements.
a) Facility type. refers to self-utilization facilities and self-disposal facilities.
b) Hazardous waste name, category, code, hazardous component name, form, and hazardous characteristics. fill in according to Section 5.5.1 of this standard
Fill in the relevant information, which can be automatically generated by the National Hazardous Waste Information Management System.
c) Self-utilization/disposal facility code. Fill in according to the pollution prevention and control facility code filled in Section 5.4.2 of this standard, which can be determined by the national
Hazardous waste information management system is automatically generated.
d) Self-use/disposal method code. Fill in according to HJ 1033 Appendix F.
e) Estimated self-utilization/disposal volume in this year. the estimated self-utilization/disposal volume of hazardous waste in this year.
f) Measurement unit. fill in tons. If it is measured by volume such as liters and cubic meters, it should be converted into weight tons; if it is measured by number,
In addition to filling in the number, it should also be converted into weight tons.
5.5.3.2 The capacity for self-utilization/disposal of hazardous waste shall be consistent with that stated in the copy of the pollution discharge permit, or according to the
The unit's environmental impact assessment documents and approval opinions are determined.
5.5.4 Hazardous waste reduction
5.5.4.1 Please refer to Appendix A.6 for the filling content of hazardous waste reduction plans and measures.
5.5.4.2 According to the production of its own products and the generation of hazardous wastes, and on the basis of drawing on the development level and experience of the same industry, it is proposed to reduce
A plan for the production of hazardous wastes and measures to reduce the hazard of hazardous wastes, clearly improving raw materials, processes, technologies, management, etc.
5.5.5 Hazardous waste transfer
Please refer to Appendix A.7 for the filling content of the transfer of hazardous wastes, and the filling should meet the following requirements.
a) Transfer type. refers to intra-provincial transfer, inter-provincial transfer and overseas transfer.
b) Hazardous waste name, category, code, hazardous component name, form, and hazardous characteristics. fill in according to Section 5.5.1 of this standard
Fill in the relevant information, which can be automatically generated by the National Hazardous Waste Information Management System.
c) Estimated transfer volume in this year. the estimated amount of hazardous waste transferred in this year.
d) Measurement unit. fill in tons. If it is measured by volume such as liters and cubic meters, it should be converted into weight tons; if it is measured by number,
In addition to filling in the number, it should also be converted into weight tons.
e) Code of utilization/disposal method. Fill in according to Appendix F of HJ 1033.
f) Types of units to be received. Hazardous waste business license holders, hazardous waste utilization and disposal exempt management units, China
Hazardous waste utilization and disposal units outside the People's Republic of China, etc.
g) Name of the unit that intends to receive the hazardous waste business license, and the number of the business license. should contact the National Hazardous Waste Information Management Department
The relevant information of the hazardous waste business license holders registered in the system is related and consistent, and can be obtained by the National Hazardous Waste Information Management System.
automatically generated.
h) The relevant information of the exempted management units for the utilization and disposal of hazardous wastes shall be registered in the national hazardous waste information management system.
i) If the hazardous waste is exported overseas, the hazardous waste outside the People's Republic of China should be filled in in the national hazardous waste information management system.
Information on the utilization and disposal unit of the material.
6 Requirements for Hazardous Waste Management Ledger Formulation
6.1 General principles
6.1.1 The unit that generates hazardous waste shall establish a hazardous waste management ledger, implement the person responsible for the records of the hazardous waste management ledger, and specify the work
It is responsible for the authenticity, accuracy and completeness of the hazardous waste management ledger.
6.1.2 The unit that generates hazardous waste shall truthfully establish various
Hazardous waste management ledger, please refer to Appendix B for the record content.
6.1.3 Hazardous waste management ledgers are divided into electronic management ledgers and paper management ledgers. Units that generate hazardous waste can pass the
The electronic management ledger is recorded in the domestic hazardous waste information management system, the enterprise's self-built information management system or a third-party platform.
6.2 Frequency requirements
If it is stored in containers and packaging after production, it shall be recorded for each container and packaging;
If it is stored in a place, it shall be recorded on a daily basis; in other special circumstances, the frequency of recording shall be determined according to the law of hazardous waste generation.
6.3 Recording content
6.3.1 In the process of hazardous waste generation, the batch code, production time, name of hazardous waste, type of hazardous waste, and hazardous waste should be recorded.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of HJ 1259-2022_English be delivered?Answer: Upon your order, we will start to translate HJ 1259-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of HJ 1259-2022_English with my colleagues?Answer: Yes. The purchased PDF of HJ 1259-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|