| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| HJ 1103-2020 | English | RFQ |
ASK
|
12 days [Need to translate]
|
Technical specification for application and issuance of pollutant permit - Specialty Chemicals manufacturing industry
| Valid |
HJ 1103-2020
|
Standard similar to HJ 1103-2020 HJ 1097 HJ 1098 HJ 1096 Basic data | Standard ID | HJ 1103-2020 (HJ1103-2020) | | Description (Translated English) | Technical specification for application and issuance of pollutant permit - Specialty Chemicals manufacturing industry | | Sector / Industry | Environmental Protection Industry Standard | | Word Count Estimation | 112,149 | | Date of Issue | 2020-02-28 | | Date of Implementation | 2020-02-28 | | Issuing agency(ies) | Ministry of Ecology and Environment | HJ 1103-2020: Technical specification for application and issuance of pollutant permit - Specialty Chemicals manufacturing industry
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Technical specification for application and issuance of pollutant permit - Specialty Chemicals manufacturing industry
National Environmental Protection Standards of the People's Republic of China
Technical specifications for pollutant discharge permit application and issuance
Special chemical product manufacturing industry
2020-02-28 release
2020-02-28 Implementation
Issued by the Ministry of Ecology and Environment
Table of contents
Foreword...I
1 Scope of application...1
2 Normative references...1
3 Terms and definitions...3
4 Requirements for the basic information of pollutant discharge units...4
5 Corresponding discharge outlets in the production and discharge process and the determination method of the permitted discharge limit...61
6 Feasible technical requirements...65
7 Self-monitoring management requirements...67
8 Requirements for preparation of environmental management ledger records and execution reports...70
9 Accounting Method of Actual Emissions...74
10 Compliance Judgment Method...78
Appendix A (informative appendix) Special chemical product manufacturing industrial products filling reference...81
Appendix B (informative appendix) reference table of main raw and auxiliary materials for some industries...85
Appendix C (Informative Appendix) Reference Table of Pollution Prevention and Control Feasible Technologies...87
Appendix D (Informative Appendix) Environmental Management Ledger Record Reference Table (Key Management)...88
Appendix E (Informative Appendix) Environmental Management Ledger Record Reference Table (Simplified Management)...92
Appendix F (Informative Appendix) Form of Pollution Discharge Permit Implementation Report...94
Foreword
To implement the Environmental Protection Law of the People’s Republic of China, the Air Pollution Prevention and Control Law of the People’s Republic of China, and the People’s Republic of China
Law of the People’s Republic of China on the Prevention and Control of Water Pollution, and the Law of the People’s Republic of China on the Prevention and Control of Soil Pollution
Notice on the Implementation Plan of the Emission Permit System (Guobanfa [2016] No. 81) and the "Administrative Measures for Pollution Permits" (for Trial Implementation) (Environmental Protection)
Ministry Order No. 48), improve the technical support system for pollutant discharge permits, and guide and standardize the pollutant discharge permits of special chemical product manufacturing industries.
Application and issuance work to develop this standard.
This standard stipulates the basic requirements for filling out the application and issuance of the pollutant discharge permit for the industrial pollutant discharge unit of the special chemical product manufacturing industry,
Determination of emission limits, actual emission accounting and compliance determination methods, as well as self-monitoring, environmental management ledger and emission permit implementation report
And other environmental management requirements, and put forward feasible technical requirements for pollution prevention and control of industrial pollutants in the manufacturing of special chemical products.
Appendices A to F of this standard are all informative appendices.
This standard is issued for the first time.
This standard is formulated by the Department of Environmental Impact Assessment and Emission Management and the Department of Regulations and Standards of the Ministry of Ecology and Environment.
Drafting organizations of this standard. Environmental Engineering Evaluation Center of Ministry of Ecology and Environment, Yunnan Society of Environmental Sciences, Jiangsu Academy of Environmental Sciences.
This standard was approved by the Ministry of Ecology and Environment on February 28, 2020.
This standard will be implemented on February 28, 2020.
This standard is interpreted by the Ministry of Ecology and Environment.
1 Pollution discharge permit application and issuance of technical specifications for the manufacturing industry of special chemical products
1 Scope of application
This standard stipulates the basic requirements for filling out the application and issuance of the pollutant discharge permit for the industrial pollutant discharge unit of the special chemical product manufacturing industry,
Determination of emission limits, calculation of actual emissions, technical methods for compliance determination, as well as self-monitoring, environmental management ledger and emission permit implementation
The report and other environmental management requirements put forward feasible technical requirements for the prevention and control of industrial pollution in the manufacturing of special chemical products.
This standard is applicable to guide the special chemical product manufacturing industry pollutant discharge unit in the national pollution discharge permit management information platform (hereinafter referred to as the sewage discharge
Licensing platform) to fill in relevant application information, and at the same time it is suitable for guiding the issuing authority to review the pollutant discharge permits of the special chemical product manufacturing industrial pollutants.
Permit application and determine permit requirements.
This standard is applicable to the management of permits for the discharge of air pollutants and water pollutants discharged by industrial pollutants from the manufacturing of special chemical products.
Special chemical products manufacturing industrial pollutants, specifically including "National Economic Industry Classification" (GB/T 4754) special chemical products
Manufacturing (266), chemical reagents and auxiliaries manufacturing (2661), special chemical products manufacturing (2662), forest chemical products manufacturing (2663),
Manufacturing of information chemicals for cultural use (2664), manufacturing of information chemicals for medical production (2665), manufacturing of special pharmaceutical materials for environmental pollution treatment
Manufacturing (2666), animal glue manufacturing (2667) and other special chemical products manufacturing (2669). Other production using the above substances as by-products
The pollution discharge permit management of air pollutants and water pollutants discharged by the production and discharge unit shall implement the pollution discharge permit application and issuance technical regulations of the corresponding industry
Fan; The production of hydrolyzed alcohol and hydrolyzed xylitol that use forest products as raw materials in forest chemical products are applicable to this standard. Chemical reagents and catalysts
In the production of raw materials involving inorganic acids, inorganic bases, inorganic salts, etc., the "Pollution Discharge Permit Application and Issuance Technical Specification Inorganic Chemical Industry" (HJ
1035), the production equipment involved in the production and modification of synthetic resins in the preparation of adhesives is applicable to the "Technical Specifications for Pollution Discharge Permit Application and Issuance"
"Petrochemical Industry" (HJ 853), the manufacture of ceramic carriers in catalysts is applicable to "Pollution Permit Application and Technical Issuance Specification"
Industry" (HJ 954).
In the special chemical product manufacturing industrial pollutant discharge unit, the pollution production equipment that implements the "Emission Standard of Air Pollutants for Thermal Power Plants" (GB 13223)
The application and discharge outlets shall apply the "Technical Specifications for the Application and Issuance of Pollution Permits for Thermal Power Industry"; implement the "Boiler Air Pollutant Emission Standards" (GB
13271) pollutant production facilities or discharge outlets, applicable to "Pollution Permit Application and Issuance Technical Specification Boiler" (HJ 953).
This standard does not make provisions, but discharges industrial waste water, waste gas and toxic and hazardous pollutants specified by the state for the production of special chemical products.
Other pollution-producing facilities and discharge outlets of pollutants shall be implemented in accordance with the "General Rules for the Application and Issuance of Pollutant Discharge Permits" (HJ 942).
2 Normative references
The content of this standard refers to the following documents or their clauses. For undated reference documents, their valid versions are applicable to this standard.
GB 8978 Integrated Wastewater Discharge Standard
GB 9078 Emission Standard of Air Pollutants for Industrial Furnaces
GB 13223 Emission Standard of Air Pollutants for Thermal Power Plants
GB 13271 Boiler Air Pollutant Emission Standard
GB 14554 Emission Standard of Odor Pollutants
GB 16297 Comprehensive Emission Standard of Air Pollutants
2GB 18597 Pollution Control Standard for Hazardous Waste Storage
GB 18599 Pollution control standard for general industrial solid waste storage and disposal sites
GB 27631 Water Pollutant Discharge Standard for Fermented Alcohol and Liquor Industry
GB 37822 Unorganized emission control standard of volatile organic compounds
GB 37824 Emission Standard of Air Pollutants for Coating, Ink and Adhesive Industry
GB/T 16157 Determination of particulate matter in exhaust from stationary sources and sampling method for gaseous pollutants
GB/T 4754 Classification of National Economic Industries
HJ 38 Determination of total hydrocarbons, methane and non-methane total hydrocarbons in exhaust gas from stationary sources. Meteorological chromatography
HJ 75 Technical Specification for Continuous Monitoring of Smoke (SO2, NOx, Particulate Matter) Emissions from Stationary Pollution Sources
HJ 76 Technical requirements and testing methods for continuous monitoring system of flue gas (SO2, NOx, particulate matter) emissions from stationary sources
HJ/T 55 Technical Guidelines for Monitoring Unorganized Emissions of Air Pollutants
HJ 91.1 Technical Specification for Wastewater Monitoring
HJ/T 353 Water Pollution Source Online Monitoring System Installation Technical Specification (Trial)
HJ/T 354 Technical Specification for Acceptance of Online Water Pollution Source Monitoring System (Trial)
HJ/T 355 Water Pollution Source Online Monitoring System Operation and Assessment Technical Specification (Trial)
HJ/T 356 Technical Specification for Data Validity Judgment of Online Water Pollution Source Monitoring System (Trial)
HJ/T 397 Fixed source exhaust gas monitoring technical specification
HJ 494 Technical Guide for Water Quality Sampling
HJ 495 Technical Regulations for Water Quality Sampling Scheme Design
HJ 608 Code Rules for Pollutant Discharge Units
HJ 819 General Rules of Technical Guidelines for Self-monitoring of Pollutant Discharge Unit
HJ 853 Pollutant Discharge Permit Application and Issuance Technical Specification Petrochemical Industry
HJ 942 General Rules of Technical Specifications for Pollution Discharge Permit Application and Issuance
HJ 944 General Rules of Technical Specifications for Environmental Management Ledger and Pollution Discharge Permit Implementation Report of Pollutant Discharge Units (Trial)
HJ 953 Sewage discharge permit application and issuance of technical specifications for boilers
HJ 954 Pollutant Discharge Permit Application and Technical Issuance Specification Ceramic Tile Industry
HJ 1035 Pollutant Discharge Permit Application and Issuance Technical Specification Inorganic Chemical Industry
"The 13th Five-Year Plan for Ecological Environment Protection" (Guo Fa [2016] No. 65)
"List of Classification Management of Discharge Permits for Fixed Pollution Sources"
"Administrative Measures for Pollution Discharge Permits (Trial)" (Ministry of Environmental Protection Order No. 48)
"Announcement on the Implementation of Special Emission Limits for Air Pollutants" (Announcement No. 14 of.2013)
"List of Priority Controlled Chemicals" (Ministry of Environmental Protection, Ministry of Industry and Information Technology, National Health and Family Planning Commission Announcement.2017
Year 83)
"Announcement on the Implementation of Special Emission Limits for Air Pollutants in Beijing-Tianjin-Hebei Air Pollution Transmission Channel Cities" (Announcement No. 9 of.2018)
"List of Toxic and Hazardous Air Pollutants" (Announcement No. 4 of.2019)
"List of Toxic and Hazardous Water Pollutants" (Announcement No. 28 of.2019)
"Technical Requirements for Standardized Remediation of Sewage Outlets (Trial)" (Environmental Supervision of the State Environmental Protection Administration [1996] No. 470)
"Reply to Issues Concerning the Implementation of Special Emission Limits for Air Pollutants" (Huanban Qiqihan [2016] No. 1087)
3 "Notice on Carrying out the Management of Elevated Source Pollution Permits for Thermal Power, Paper Industry and Beijing-Tianjin-Hebei Pilot Cities" (Huanshuiti [2016] No. 189)
"Notice on Strengthening the Prevention and Control of Nitrogen and Phosphorus Pollution from Stationary Pollution Sources" (Huanshui Body [2018] No. 16)
"Notice on Issuing the Sample of Pollution Discharge Permit Commitment Letter, Pollution Permit Application Form and Pollution Permit Format" (Huan Gui Cai [2018] No. 80)
"Comprehensive Treatment Plan for Volatile Organic Compounds in Key Industries" (Huan Taiqi [2019] No. 53)
"Comprehensive Treatment Plan for Air Pollution in Industrial Furnaces" (Huan Qiqi [2019] No. 56)
3 Terms and definitions
The following terms and definitions apply to this standard.
3.1 Pollutant emission unit of specialty chemicals manufacturing
industry
Refers to the production of chemical reagents and auxiliaries, special chemicals, forest chemical products, cultural information chemicals, medical production information chemicals
Products, environmental pollution treatment special pharmaceutical materials, animal glue and other special chemicals are the industrial pollutant discharge units of the products.
3.2 Pollutant emission unit of chemical reagents and auxiliaries
manufacturing industry
Refers to industrial pollutant discharge units that produce various chemical reagents, catalysts, and special additives.
3.3 Pollutant emission unit of special chemical items manufacturing
industry
Refers to the production of water treatment chemicals, paper chemicals, leather chemicals, oleochemicals, oil field chemicals, bioengineering chemicals,
Special chemicals for daily chemical products are the industrial pollutant discharge units of the products.
3.4 Pollutant emission unit of forestry chemical products manufacturing
industry
Refers to an industrial pollutant discharge unit that uses forest products as raw materials to produce products through chemical, biochemical and physical processing methods.
3.5 Pollutant emission unit of cultural information chemicals
manufacturing industry
Refers to the production of photosensitive materials for film, photography, slideshow and projection, washing kits, magnetic and optical recording materials, and auxiliary materials for optical fiber communication
The industrial pollutant discharge unit of products such as raw materials and special chemical preparations.
3.6 Pollutant emission unit of medical information chemicals
manufacturing industry
Refers to industrial pollutant discharge units that produce medical and other production-use photosensitive materials, flushing kits and other chemical agents as products.
3.7 Pollutant emission unit of special chemicals and materials manufacturing pollutant emission unit of special chemicals and materials
for environmental pollution treatment manufacturing industry
Refers to the production of products such as chemicals and materials used for the treatment of pollutants such as water pollution, air pollution, solid waste, and soil pollution
4 industrial sewage units.
3.8 Pollutant emission unit of animal glue manufacturing industry
Refers to an industrial sewage disposal unit that uses animal bones and skins as raw materials and undergoes a series of process treatments to make glue products with a certain degree of transparency, viscosity, and purity.
3.9 permitted emission limits
Refers to the maximum discharge concentration (rate) and maximum discharge volume of pollutants that are allowed to be discharged by the pollutant discharge unit specified in the pollution discharge permit.
3.10 special periods
According to the environmental quality compliance plan formulated by the local people’s government in accordance with the law or other relevant environmental management documents, the pollution of pollutants
The period of time when there are special requirements for the discharge of waste, including the period of response to heavy pollution weather.
3.11 volatile organic compounds (VOCs)
Refers to organic compounds that participate in atmospheric photochemical reactions, or organic compounds determined in accordance with relevant regulations.
When characterizing the overall VOCs emissions, according to industry characteristics and environmental management requirements, total volatile organic compounds (TVOC
Expressed), non-methane total hydrocarbons (expressed as NMHC) as pollutant control items.
3.12 total volatile organic compounds (TVOC)
Use the prescribed monitoring method to measure the individual VOCs in the exhaust gas, and add the total amount of VOCs to obtain the total
The total mass concentration of VOCs substances. In actual work, according to the expected analysis results, the individual VOCs that account for more than 90% of the total
Measure and sum up.
3.13 Non-methane hydrocarbons (NMHC)
Using the prescribed monitoring method, the hydrogen flame ionization detector responds to the general name of gaseous organic compounds other than methane, measured by the mass concentration of carbon.
3.14 volatile organic liquid
Refers to any organic liquid that can release VOCs into the atmosphere and meet one of the following conditions.
(1) A single-component organic liquid with a true vapor pressure greater than or equal to 0.3kPa;
(2) In the mixture, the total mass of the components whose true vapor pressure is greater than or equal to 0.3 kPa accounts for an organic liquid that is greater than or equal to 20%.
4 Requirements for basic information of pollutant discharge units
4.1 General principles
Special chemical product manufacturing industrial pollutant discharge units shall fill in the corresponding information in the pollutant discharge permit platform declaration system in accordance with the requirements of this standard. Fill in
If it is not included in the system, the local ecological and environmental authorities require it to be filled out or the pollutant discharge unit considers it to be filled out, it can add content by itself.
Local ecological and environmental authorities at or above the municipal level with districts may, in accordance with local environmental protection regulations, increase the need to include in the pollution discharge permit
And fill in the “management content added by the local ecological and environmental authorities with the right to issue” in the pollutant discharge permit platform declaration system.
Special chemical product manufacturing industrial pollutants are determined to belong to key management or simplified management according to the "List of Classification Management of Pollution Permits for Fixed Pollution Sources"
5.Management of pollutant discharge units.
4.2 Basic information of pollutants
The basic information of the pollutant discharge unit should be filled with the name of the pollutant discharge unit, whether it needs to be corrected, the license management category, the postal code, the industry category,
Whether it is put into production and the date of start-up, the latitude and longitude of the center of the production and operation site, whether the location is an environmentally sensitive area or a key control area (such as atmospheric heavy
Point control area, total phosphorus and total nitrogen control area, etc.), whether it is located in the industrial park and the name of the industrial park to which it belongs, the environmental impact assessment approval document number,
The identification or filing document number of the local government on the illegal project, the document number of the main pollutant total distribution plan, the total particulate matter indicator (t/a),
Total sulfur dioxide indicator (t/a), total nitrogen oxide indicator (t/a), total chemical oxygen demand indicator (t/a), total ammonia nitrogen indicator (t/a),
Other total pollutant indicators (if any), etc.
4.3 Main products and production capacity
4.3.1 General principles
When reporting the main products and production capacity, chemical reagents and auxiliaries, special chemicals, forest chemical products, cultural information chemistry should be selected
Products, information chemicals for medical production, special pharmaceutical materials for environmental pollution treatment, animal glue, other special chemicals, etc.
International production product name.
The pollutant discharge unit shall fill in the relevant main production units, main processes, production facilities, and production facilities in the declaration system according to the requirements of this standard.
Number, facility parameters, product name, production capacity, measurement unit, design year production time and other option information.
4.3.2 Main production units
The main production unit is required. The production unit of the special chemical product manufacturing industrial pollutant discharge unit is divided into raw material pretreatment/preparation unit, production unit
Production/reaction unit, separation and refining unit, finished product unit and common unit. If multiple production lines are included, they should be filled in separately.
4.3.4 Production facilities
Production facilities are divided into required and optional items. The specific requirements are as follows.
a) It must be filled out one by one for a single device;
b) The facilities that characterize the production capacity of the production unit are required;
c) The production facilities that produce or discharge production wastewater and waste gas are required;
d) Gas generator, torch, etc. are required;
e) The pollutant discharging unit that only produces intermediate products or part of the products selects the production facilities according to the actual situation.
This standard has not yet made provisions, but produces industrial waste gas, wastewater and has clear national or local emission (control) standards, the corresponding production
Facilities are required.
4.3.7 Product name
The product name is required. Please refer to Appendix A for the product classification of the pollutant discharge unit. Select the product classification and fill in the specific product name.
Name the product category and formula, or select "Other" to fill in by yourself.
4.3.8 Production capacity and measurement units
Production capacity and unit of measurement are required. Production capacity is the design capacity of the main product, excluding those eliminated or eliminated by the national or local government.
Banned capacity. According to the product type, the unit of measurement for capacity and output is t/a, m2/a or m3/a, kL/a, and others.
When there is no design capacity data, the average actual output of the past three years can be calculated.
4.3.9 Design year production time
The production time in the design year is a required item, and it should be based on the environmental impact assessment documents and approval opinions or the local government’s identification or filing of illegal items
Fill in the annual production time in the file. If there are no approval opinions, confirmation or filing documents, fill in the actual annual production time.
4.3.10 Other
Others are optional. If the pollutant discharge unit needs to explain, you can fill it in.
4.4 Main raw and auxiliary materials and fuels
The contents of the main raw and auxiliary materials and fuels include type, name of raw and auxiliary materials, composition of raw and auxiliary materials, fuel name, fuel composition, design
Calculate annual usage, others, etc. The composition and proportion of toxic and hazardous substances in raw materials and fuels are required. Toxic and hazardous substances are listed in the "Excellent
List of Controlled Chemicals, "List of Toxic and Hazardous Air Pollutants", "List of Toxic and Hazardous Water Pollutants" and other relevant documents and regulations
Chemical substances.
The specific requirements for filling in raw and auxiliary materials and fuel are ...
|