HOME   Cart(12)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

HG/T 3097-2006 English PDF

HG/T 3097: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
HG/T 3097-2006English519 Add to Cart 3 days [Need to translate] Rubber seals. Joint rings for pipelines for hot-water supply up to 110 Celsius. Specification for the materials Obsolete HG/T 3097-2006
HG/T 3097-1989EnglishRFQ ASK 3 days [Need to translate] (Below 110 Celsius hot water delivery pipe rubber ring material specification) Obsolete HG/T 3097-1989

PDF similar to HG/T 3097-2006


Standard similar to HG/T 3097-2006

QC/T 639   GB/T 3672.1   HG/T 3089   HG/T 6183   HG/T 6181   HG/T 3096   

Basic data

Standard ID HG/T 3097-2006 (HG/T3097-2006)
Description (Translated English) Rubber seals. Joint rings for pipelines for hot-water supply up to 110 Celsius. Specification for the materials
Sector / Industry Chemical Industry Standard (Recommended)
Classification of Chinese Standard G43
Classification of International Standard 83.140.50; 91.140.60; 91.140.80
Word Count Estimation 13,119
Date of Issue 2006-07-26
Date of Implementation 2007-03-01
Older Standard (superseded by this standard) HG/T 3097-1989
Quoted Standard GB/T 528-1998; GB/T 1685-1989; GB/T 1690-1992; GB/T 2941-1991; GB/T 3512-2001; GB/T 3672.1-2002; GB/T 5576-1997; GB/T 6031-1998; GB/T 7757-1993; GB/T 7759-1996; GB/T 7762-2003; GB/T 9865.1-1996; GB/T 12829-1991; GB/T 17604-1998; ISO 2285-2001; ISO 6914-2004
Adopted Standard ISO 9631-2003, IDT
Regulation (derived from) Development and Reform Commission Notice 2006/45
Issuing agency(ies) Ministry of Industry and Information Technology
Summary This standard specifies the drinking and non- drinking water (up to 110��C) supply pipes vulcanized rubber gasket material requirements. This standard applies to cast iron pipe, steel, ceramic pipes, asbestos cement pipes, cement pipes, reinforced concrete pipes, plastic pipes and glass fiber reinforced plastic pipe and all pipe joints seals. This standard applies to composite or non- composite elastomer seal part. For the hardness range 76 IRHD ~ 95 IRHD of composite material seals, sealing effect only when the materials involved in or contribute to the long-term stability of seals when applicable elongation, compression and application of relaxation requirements. This standard does not apply to closed-cell cellular rubber material or material as part of its structure made ??of the interface seals.