Powered by Google www.ChineseStandard.net Database: 189759 (16 Jun 2024)

HG/T 21529-2005 English PDF

HG/T 21529-2005 (HG/T21529-2005, HGT 21529-2005, HGT21529-2005)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
HG/T 21529-2005EnglishRFQ ASK 9 days [Need to translate] Hand hole plate flat welding flange Obsolete HG/T 21529-2005
HG/T 21529-2014English319 Add to Cart 3 days [Need to translate] Plate flange handholes Valid HG/T 21529-2014

Standard ID HG/T 21529-2005 (HG/T21529-2005)
Description (Translated English) Hand hole plate flat welding flange
Sector / Industry Chemical Industry Industry Standard (Recommended)
Classification of Chinese Standard G91
Classification of International Standard 11.120.99
Word Count Estimation 31,348
Date of Issue 2005-07-10
Date of Implementation 2006-01-01
Older Standard (superseded by this standard) HG 21529-1995
Quoted Standard HG 20593-1997; HG 20601-1997; HG 20606-1997; HG 20607-1997; HG 20613-1997; HG/T 21514-2005
Drafting Organization China Tianchen Chemical Engineering Corporation
Administrative Organization National Development and Reform Commission, People Republic of China
Regulation (derived from) NDRC Notice No. 35 of 2005
Summary This standard specifies the carbon steel and stainless steel plate welded flange into the hole of the type, the basic parameters, size, technical requirements and related restrictions. This standard applies to nominal pressure PN is less than or equal to 0. 6MPa, working temperature and the corresponding maximum working pressure without impact restrict the category of the material within the range specified in Table 3-2 plate flat welding flange into the hole.

Standards related to: HG/T 21529-2005