| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/Z 29014.3-2024 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Cutting tool data representation and exchange - Part 3: Reference dictionary for tool items
| Valid |
GB/Z 29014.3-2024
|
PDF similar to GBZ29014.3-2024
Basic data | Standard ID | GB/Z 29014.3-2024 (GB/Z29014.3-2024) | | Description (Translated English) | Cutting tool data representation and exchange - Part 3: Reference dictionary for tool items | | Sector / Industry | National Standard | | Classification of Chinese Standard | J41 | | Classification of International Standard | 35.240.50 | | Word Count Estimation | 398,398 | | Date of Issue | 2024-04-25 | | Date of Implementation | 2024-11-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GBZ29014.3-2024: Cutting tool data representation and exchange - Part 3: Reference dictionary for tool items
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
GB /Z 29014:3-2024: Cutting tool data representation and exchange Part 3: Tool item reference dictionary
ICS 35:240:50
CCSJ41
Guiding technical documents of the People's Republic of China on national standardization
Cutting tool data representation and exchange
Part 3: Tool item reference dictionary
(ISO /T S13399-3:2021,IDT)
Released on 2024-04-25
2024-11-01 Implementation
State Administration for Market Regulation
The National Standardization Administration issued
Table of Contents
Preface III
Introduction IV
1 Scope 1
2 Normative references 1
3 Terms and Definitions 2
4 Abbreviations 4
5 Expression of Ontology Concept Dictionary Entries 4
5:1 General 4
5:2 Tool Project Reference System 4
5:3 Tool item characteristics 6
5:4 Tool item type 7
5:5 General element types 12
5:6 Cutting project characteristics 12
5:7 Connection project characteristics 13
6 Tool item characteristics and characteristics of tool item types 13
Appendix A (Normative) Principles of GB /Z 29014 series 23
Appendix B (Informative) Classification Table 25
Appendix C (Informative) Class Definition 30
Appendix D (Informative) Tool Item Characteristics Definition 75
Appendix E (Informative) Characteristic Illustrations 266
Appendix F (Informative) Item Type Code Illustration 272
References 389
Foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents"
Drafting:
This document is part 3 of GB /Z 29014 "Cutting tool data representation and exchange": GB /Z 29014 has published the following
part:
--- Part 1: Overview, basic principles and general information model;
--- Part 2: Reference dictionary for cutting items;
--- Part 3: Tool item reference dictionary;
--- Part 4: Adaptation item reference dictionary;
--- Part 5: Assembly item reference dictionary;
--- Part 100: Definitions, principles and methods of reference dictionaries:
This document is equivalent to ISO /T S13399-3:2021 "Cutting tool data expression and exchange Part 3: Tool item reference word
The document type was adjusted from ISO technical specification to my country's national standardization guiding technical document:
Please note that some of the contents of this document may involve patents: The issuing organization of this document does not assume the responsibility for identifying patents:
This document was proposed by the China Machinery Industry Federation:
This document is under the jurisdiction of the National Technical Committee for Standardization of Cutting Tools (SAC/TC91):
This document was drafted by: Chengdu Tool Research Institute Co:, Ltd:, Hanjiang Tool Co:, Ltd:, Shanghai Jiaotong University, Chengdu Tool Inspection
Measurement Institute:
The main drafters of this document are: Zhu Hong, Rong Qiang, Zheng Pantuo, Chen Ming, An Qinglong, Ming Weiwei, Liang Jiajia, Xu Gang, and Chen Wenlang:
Introduction
GB /Z 29014 provides a method for describing various data related to cutting tools and cutting tool assemblies by providing the information structure required:
A method for realizing the informational expression of cutting tool data (including all items between the workpiece and the machine tool):
Replaceable cutting items), solid tools (e:g: solid drills and solid end mills), assembly tools (e:g: boring bars, indexable drills and
Information on indexable milling cutters), adapters (e:g: milling shanks and chucks), components (e:g: washers, screws and clamps) or any combination of these can be included:
Exchange: It is intended to facilitate the use, processing and exchange of cutting tool data within and between manufacturers, distributors and users:
This document is Part 3 of GB /Z 29014 “Cutting tool data representation and exchange”: GB /Z 29014 consists of 6 parts:
--- Part 1: Overview, basic principles and general information model: The purpose is to provide a basis for the expression and exchange of cutting tool data:
These principles and general information model are used by other parts of GB /Z 29014:
--- Part 2: Cutting project reference dictionary: The purpose is to provide a reference dictionary for cutting projects to support the use of
The general information model defined in GB /Z 29014:1:
--- Part 3: Tool project reference dictionary: The purpose is to provide a reference dictionary for tool projects to support the use of
The general information model defined in GB /Z 29014:1:
--- Part 4: Adaptation project reference dictionary: The purpose is to provide a reference dictionary for adaptation projects to support the use of
The general information model defined in GB /Z 29014:1:
--- Part 5: Assembly Item Reference Dictionary: The purpose is to provide a reference dictionary for assembly items to support the use of
The general information model defined in GB /Z 29014:1:
--- Part 100: Definitions, principles and methods for reference dictionaries: The purpose is to provide specifications for the creation of reference dictionaries to support the use of
The general information model defined in GB /Z 29014:1:
This document contains a reference dictionary of terms, characteristics and definitions for tool items relating to tools having one or more cutting edges:
Items, including but not limited to turning tools, milling cutters, drilling tools and threading tools:
The goal of GB /Z 29014 is to provide a method for expressing in a computer-readable form independent of any particular computer system
Describes information about cutting tools: This representation will help to communicate cutting tool data within and between different software systems and computer platforms:
The processing and exchange of data in order to support the use of such data in production planning, cutting processing and supply of cutting tools:
This makes it suitable not only for neutral file exchange, but also as a basis for implementing and sharing product databases and archives:
The method was developed by ISO /TC184/SC4 to express product data using standardized information models and reference dictionaries:
An information model is a formal specification of concepts, facts, and data processing types that together describe important parts of the real world and provide
A set of clear rules for interpretation: Information is knowledge of concepts, facts, and/or data processing: Data is symbols that express information (using some
A symbol or function that identifies information about things by rules and definitions, used in data processing: Usually, the required data is extracted through a data dictionary:
To avoid misunderstandings, everyone involved in the communication is expected to use the same information model, the same set of explicit rules, and the same
Dictionary: If an information model and its dictionary are written in a computer-readable language, they have the additional benefit of
They can be processed by computers:
The definition and identification of dictionary entries are defined by standard data, which is composed of instances of EXPRESS entity data types:
This is a joint product of the definitions and extensions of ISO /TC184/SC4 and IEC SC3D, ISO 13584-24 and ISO 13584-25:
raw:
This document uses the following standard content developed by ISO /TC184/SC4:
--- EXPRESS language defined in ISO 10303-11 and used in GB /Z 29014:1;
--- Data exchange formats and models defined in ISO 10303-21;
--- Data dictionary defined in the ISO 13584 series:
Cutting tool data representation and exchange
Part 3: Tool item reference dictionary
1 Scope
This document specifies the reference dictionary of tool items and the properties and value ranges of their descriptions:
The reference dictionaries specified in this document include:
--- Definition and identification of tool item classes and their characteristics, and related classification schemes;
--- Definition and identification of data element types representing tool item characteristics and their features;
---Used to describe the definition and identification of the value domain of the above data element type:
This document applies to:
---Standard data representing various tool item classes and tool item characteristics;
---Standard data indicating the characteristics of various tool items and tool item features;
---Represents standard data for tool item characteristics and tool item characteristic value ranges;
--- Definition of cutting process;
--- Definition of tool items and their characteristic reference system;
---The implementation method by which the standard data defined in this document can be exchanged:
NOTE 1 ISO 10303-21 specifies the means by which the standard data defined in this document can be exchanged:
This document does not apply to:
---Specialized or specialized knowledge in the design and use of cutting tools;
--- Principles for determining what information should be transmitted;
---Applications that can store or reference these standard data;
--- In addition to the implementation methods defined in this document, other methods that can achieve standard data exchange and reference;
---Cutting tool information model;
--- Definition of the classes and characteristics of cutting items;
---Definition of classes and characteristics of adaptation items;
---Definition of assembly item classes and characteristics;
--- Definition of connection system classes and characteristics;
---Refer to the definitions of system classes and characteristics:
Note 2: The definition of the information model of cutting tools is given in GB /Z 29014:1:
Note 3: The definitions of tool items, adaptation items, assembly item classes and characteristics are given in GB /Z 29014:2, GB /Z 29014:4 and GB /Z 29014:5 respectively:
Note 4: For the definition of classes and characteristics of connection systems and reference systems, see ISO /T S13399-50:
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document:
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document:
GB /Z 29014:100 Cutting tool data expression and exchange Part 100: Definitions, principles and methods of reference dictionary
(GB /Z 29014:100-2024, ISO /T S13399-100:2008, IDT)
|