| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 9330.3-2008 | English | RFQ |
ASK
|
5 days [Need to translate]
|
Plastic insulated control cables -- Part 3: Cross-linked polyethylene insulated control cables
| Obsolete |
GB/T 9330.3-2008
|
PDF similar to GB/T 9330.3-2008
Basic data | Standard ID | GB/T 9330.3-2008 (GB/T9330.3-2008) | | Description (Translated English) | Plastic insulated control cables -- Part 3: Cross-linked polyethylene insulated control cables | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K13 | | Classification of International Standard | 29.060.20 | | Word Count Estimation | 26,212 | | Date of Issue | 2008-12-30 | | Date of Implementation | 2009-10-01 | | Quoted Standard | GB/T 2951.11-2008; GB/T 2951.12-2008; GB/T 2951.14-2008; GB/2951.21-2008; GB/T 2951.31-2008; GB/T 2951.32-2008; GB/T 3048.4-2007; GB/T 3048.5-2007; GB/T 3048.8-2007; GB/T 9330.1-2008; GB/T 19666-2005 | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 23 of 2008 (No. 136 overall) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the rated voltage of 450/750 V and below XLPE insulated control cables technical requirements. This section applies to the rated voltage of 450/750 V and under control, monitor and protect the loop line and other fixed installations occasions XLPE insulated control cables. This section and GB/T 9330. 1-2008 together. | GB/T 9330.3-2008: Plastic insulated control cables -- Part 3: Cross-linked polyethylene insulated control cables
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Plastic insulated control cables Part 3. Cross-linked polyethylene insulated control cables
ICS 29.060.20
K13
National Standards of People's Republic of China
Plastic insulated control cable
Part 3. XLPE insulated control cables
Posted 2008-12-30
2009-10-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 the use of features 1
4 Model 2
5 Specifications 2
6 2 Technical Requirements
7 finished cable 20
20 8 Inspection Rules
Foreword
GB/T 9330 "plastic insulated control cable" is divided into three parts.
--- Part 1. General requirements;
--- Part 2. PVC insulated and sheathed control cable;
--- Part 3. XLPE insulated control cable.
This section GB/T 39330 Part of.
This part is proposed by the China Electrical Equipment Industrial Association.
This part of the National Standardization Technical Committee Wire and Cable (SAC/TC213) centralized.
This part of the unit responsible for drafting. Shanghai Electric Cable Research Institute.
Participated in the drafting of this section. Zhejiang Wanma Cable Co., Ltd., Baosheng Science and Technology Innovation Co., Ltd., Shanghai Nanda Group has
Ltd., Wuxi and Shanghai Wire and Cable Co., Ltd., Shandong Dillon Cable Co., Ltd., Hunan Cable Co., Ltd. Gold can.
The main drafters of this section. Tangjia Zi, including Hairong, Zheng, Ma Hong, Yang Zhiqiang, Liu Yao Yu, Xiebo Min, Yi Weimin.
This section first release.
Plastic insulated control cable
Part 3. XLPE insulated control cables
1 Scope
This section GB/T 9330 specifies the rated voltage of 450/750V and below XLPE insulated control cable technical requirements.
This section applies to the rated voltage of 450/750V and below control, monitor and protect the loop line and other fixed laying occasions crosslinked use
PE insulated control cable.
This section and GB/T 9330.1-2008 used together.
2 Normative references
The following documents contain provisions which, through reference to GB/T 9330 to the present, constitute provisions of this section. For dated references,
All subsequent amendments (excluding corrections) or revisions do not apply to this section, however, encourage an agreement under this section
Parties to study the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB/T 2951.11-2008 cable and the cable Common test methods for insulating and sheathing materials - Part 11. General test side
Law --- --- Measurement of thickness and overall dimensions of mechanical tests (IEC 60811-1-1.2001, IDT)
GB/T 2951.12-2008 cable and the cable Common test methods for insulating and sheathing materials - Part 12. General test side
Law --- Thermal aging methods (IEC 60811-1-2. 1985, IDT)
GB/T 2951.14-2008 cable and the cable Common test methods for insulating and sheathing materials - Part 14. General test side
Law --- Low temperature test (IEC 60811-1-4. 1985, IDT)
GB/T 2951.21-2008 cable and the cable Common test methods for insulating and sheathing materials - Part 21. elastomeric compounds designed
Test method for ozone resistance test --- --- --- Hot set test - Mineral oil immersion tests (IEC 60811-2-1.2001, IDT)
GB/T 2951.31-2008 cable and the cable Common test methods for insulating and sheathing materials - Part 31. Polyvinyl chloride mixture
Methods specific high temperature pressure test --- --- resistance to cracking (IEC 60811-3-1. 1985, IDT)
GB/T 2951.32-2008 cable and the cable Common test methods for insulating and sheathing materials - Part 32. Polyvinyl chloride mixture
Special test methods --- --- Loss of mass test - Thermal stability test (IEC 60811-3-2. 1985, IDT)
GB/T 3048.4-2007 cable Cable electrical performance test methods - Part 4. Conductor DC resistance test
GB/T 3048.5-2007 cable Cable electrical performance test methods - Part 5. Insulation resistance test
GB/T 3048.8-2007 cable Cable electrical performance test methods Part 8. AC voltage test (IEC 60060-1. 1989, NEQ)
GB/T 9330.1-2008 plastic insulated control cables - Part 1. General requirements
GB/T 19666-2005 retardant and fire-resistant wire and cable General
3 Use Characteristics
3.1 Rated voltage
Rated voltage U0/U is 450/750V.
3.2 Cable operating temperature
Cable conductor long-term allowable working temperature of 90 ℃.
3.3 cable laying temperature
Cable laying temperature not lower than 0 ℃.
|