|
US$529.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 9258.3-2025: Coated abrasives - Determination and designation of grain size distribution - Part 3: Microgrit sizes P240 to P5000
Status: Valid GB/T 9258.3: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 9258.3-2025 | English | 529 |
Add to Cart
|
5 days [Need to translate]
|
Coated abrasives - Determination and designation of grain size distribution - Part 3: Microgrit sizes P240 to P5000
| Valid |
GB/T 9258.3-2025
|
| GB/T 9258.3-2017 | English | 359 |
Add to Cart
|
4 days [Need to translate]
|
Coated abrasives -- Grain size analysis -- Part 3: Determination of grain size distribution of microgrits P240 to P2 500
| Valid |
GB/T 9258.3-2017
|
| GB/T 9258.3-2000 | English | 359 |
Add to Cart
|
3 days [Need to translate]
|
Coated abrasives. Grain size analysis. Part 3: Determination of grain size distribution of microgrits P240 to P2500
| Obsolete |
GB/T 9258.3-2000
|
PDF similar to GB/T 9258.3-2025
Basic data | Standard ID | GB/T 9258.3-2025 (GB/T9258.3-2025) | | Description (Translated English) | Coated abrasives - Determination and designation of grain size distribution - Part 3: Microgrit sizes P240 to P5000 | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J43 | | Classification of International Standard | 25.100.70 | | Word Count Estimation | 26,235 | | Date of Issue | 2025-08-01 | | Date of Implementation | 2026-02-01 | | Older Standard (superseded by this standard) | GB/T 9258.3-2017, GB/T 9258.1-2000, GB/T 9258.1-2000 | | Issuing agency(ies) | State Administration for Market Regulation, Standardization Administration of China | GB/T 9258.3-2025: Coated abrasives - Determination and designation of grain size distribution - Part 3: Microgrit sizes P240 to P5000
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT9258.3-2025
ICS 25.100.70
CCSJ43
National Standard of the People's Republic of China
Replaces GB/T 9258.3-2017, partially replaces GB/T 9258.1-2000
Detection and marking of abrasive particle size composition for coated abrasives
Part 3.Micro powder P240~P5000
(ISO 6344-3.2021,MOD)
Released on August 1, 2025
Implementation on February 1, 2026
State Administration for Market Regulation
The National Standardization Administration issued
Table of Contents
Preface III
Introduction V
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Particle size composition of micro powder P240~P1200 1
5 Determination method of micro powder P240~P1200 2
6 Particle size composition of micro powder P1500~P5000 11
7 Determination method of micro powder P1500~P5000 12
8 Test Report 14
9 Mark 14
10 Logo 15
Appendix A (Informative) Technical differences between this document and ISO 6344-3.2021 and their causes 16
Appendix B (Informative) Recording Form for P Powder Sedimentation Analysis Results Using a Sedimentation Tube Particle Size Analyzer 17
Appendix C (Informative) Example of recording the results of the sedimentation analysis of P micropowder using a sedimentation tube particle size analyzer 18
Preface
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
This document is Part 3 of GB/T 9258 "Testing and marking of abrasive grain size composition for coated abrasives". GB/T 9258 has been
The following parts were published.
--- Part 2.Coarse abrasive particles P12 to P220;
--- Part 3.Micropowders P240 to P2500.
This document replaces GB/T 9258.3-2017 "Abrasive particle size analysis for coated abrasives Part 3.Micropowder P240~P2500 particle size group
The document partially replaces GB/T 9258.1-2000 "Abrasive particle size analysis for coated abrasives Part 1.Particle size composition".
GB/T 9258.3-2017 is the main standard, which integrates the contents related to micropowder in GB/T 9258.1-2000.
In addition to structural adjustments and editorial changes, the main technical changes are as follows.
a) The scope has been changed (see Chapter 1, Chapter 1 of the.2017 edition);
b) Changed terms and definitions (see Chapter 3, Chapter 3 of the.2017 edition);
c) The content of the determination method mark has been deleted (see 4.2 and 5.2 of the.2017 edition);
d) The content of calibration sand has been changed (see 5.1.3, 4.3.3.3 of the.2017 edition);
e) The sample dispersion step has been changed (see 5.4.2, 4.3.4.2.3 of the.2017 edition);
f) The provisions for recording measured values have been changed (see 5.4.6, 4.3.4.2.7 of the.2017 edition);
g) Added general provisions for the evaluation of micropowders P240 to P1200 (see 5.5.1);
h) The provisions for determining volume fraction have been changed (see 5.5.3, 4.3.5.2 of the.2017 edition);
i) The content of particle size composition curve drawing has been changed (see 5.5.4, 4.3.5.3 of the.2017 edition);
j) The content of the determination of corundum sample examples has been changed (see 5.5.6, 4.3.5.5 of the.2017 edition);
k) The particle size composition and test methods of micropowders P1500 to P2500 have been changed (see Chapters 6 and 7, and Chapter 5 of the.2017 edition);
l) Added content and test methods for particle size composition of P3000, P4000 and P5000 (see Chapters 6 and 7);
m) Added test report requirements (see Chapter 8);
n) The marking provisions have been changed (see Chapter 10, Chapter 7 of the.2017 edition).
This document is modified to adopt ISO 6344-3.2021 "Testing and marking of abrasive grain size composition for coated abrasives - Part 3.Micropowders"
P240~P5000》.
This document has the following structural adjustments compared to ISO 6344-3.2021.
--- Tables 3 to 8 correspond to Tables 4 to 9 in ISO 6344-3.2021, and Table 3 in ISO 6344-3.2021 is deleted;
--- Added Appendix A;
--- Deleted Appendix A in ISO 6344-3.2021.
This document has many technical differences compared to ISO 6344-3.2021.
A list of these technical differences and their reasons is given in Appendix A.
The following editorial changes have been made to this document.
--- Deleted the notes in Table 1 and Table 5;
--- Deleted Appendix A (informative) "Theoretical equivalent particle size d of fused corundum powder and silicon carbide powder".
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document was proposed by the China Machinery Industry Federation.
This document is under the jurisdiction of the National Technical Committee for Standardization of Abrasives and Grinding Tools (SAC/TC139).
This document was drafted by. Zhengzhou Abrasives and Grinding Tools Research Institute Co., Ltd., Zibo Jinjiyuan Abrasives Co., Ltd., Xinzheng Baodegao
Technology Co., Ltd., Lianyungang Woxin High-tech Materials Co., Ltd., and Shaoxing Ziyuan Abrasives Co., Ltd.
The main drafters of this document are Yu Jiayin, Bao Hua, Zhang Liang, Ding Jie, Gao Zenglu, Huang Wei, and Xu Yajie.
The previous versions of this document and the documents it replaces are as follows.
---First published as GB/T 9258.3-2000 in.2000 and first revised in.2017;
--- This is the second revision, incorporating GB/T 9258.1-2000 "Abrasive particle size analysis for coated abrasives Part 1.Particle size analysis for coated abrasives
Contents related to micro powder in "Composition of Micro Powder".
introduction
Due to the different requirements of grinding purpose, grinding efficiency, grinding accuracy, etc., the requirements for abrasive size are also different, so the abrasive needs to be
The abrasive is processed and graded into different particle sizes to meet different grinding requirements. This requires characterization and testing of the particle size of the abrasive and its
Row standardization.
Particle size composition is a specific characterization of abrasive particle size, which is based on the corresponding detection technology.
There are many technologies for the characterization and detection of particle size. However, due to the limitations of the technology, as well as considerations of efficiency and economy, no one technology has been successfully used.
This technology is fully applicable to the characterization and detection of all particle sizes of abrasives.
Generally, the particle size of coarser abrasives is characterized and tested based on sieving methods, while the particle size of finer abrasives is characterized and tested based on sedimentation methods and other methods.
Correspondingly, the particle size of abrasives is divided into coarse abrasive particles and fine powder from coarse to fine.
GB/T 9258 "Testing and marking of abrasive grain size composition for coated abrasives" is intended to consist of two parts.
--- Part 2.Coarse abrasive grains P12~P220.The purpose is to provide the particle size characterization and detection method of coarse abrasive grains for coated abrasives.
law and specifies marking and logo requirements.
--- Part 3.Micropowders P240~P5000.The purpose is to provide the particle size characterization and detection methods of micropowder abrasives for coated abrasives, and
Specify marking and signage requirements.
Detection and marking of abrasive particle size composition for coated abrasives
Part 3.Micro powder P240~P5000
1 Scope
This document specifies the determination or test method for the particle size composition of ordinary abrasive micropowders P240~P5000 for coated abrasives.
This document applies to abrasives used in the manufacture of coated abrasives and to abrasives recovered from coated abrasives for testing purposes.
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
GB/T 4676 Sampling Methods for Common Abrasives (GB/T 4676-2018, ISO 9138.2015, MOD)
GB/T 16458 Terminology of Abrasives and Grinding Tools
JB/T 6569 Packaging of general abrasives
ISO 13317-3 Determination of particle size composition by gravity liquid sedimentation method Part 3.X-ray gravimetric technique
technique)
3 Terms and Definitions
The terms and definitions defined in GB/T 16458 and the following apply to this document.
3.1
microgrit
Abrasive particles with an equivalent median particle size of 58.5 μm to 2.7 μm and a particle size composition (3.2) determined by sedimentation method.
3.2
The mass fraction of abrasive particles of different sizes in a certain particle size number.
[Source. GB/T 16458-2021, 3.1.5.2]
4 Particle size composition of micropowder P240~P1200
For the determination of fine powder with particle size of P240~P1200 by sedimentation method, a sedimentation tube particle size analyzer (see 5.2.1) should be used.
The volume of the suspended abrasive sample settled in the collection tube within a certain period of time and the equivalent particle size were calculated according to Stokes' law.
The criteria for determining the particle size composition of micropowder P240~P1200 are as follows.
a) The first particle to settle is the largest particle, and its particle size (theoretical particle size) should not exceed the maximum allowable value of ds0;
b) At the 3% point of the particle size composition curve, the particle size (theoretical particle size) should not exceed the maximum allowable value of ds3;
c) At the 50% point of the particle size composition curve, the median particle size (theoretical particle size) should be within the specified ds50 allowable deviation;
d) At the 95% point of the particle size composition curve, the particle size (theoretical particle size) should reach the minimum allowable value of ds95.
|