HOME   Cart(6)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 9120-2010 English PDF

US$719.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 9120-2010: Loose plate steel pipe flanges with weld-neck collar and with weld ring neck
Status: Obsolete

GB/T 9120: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 9120-2010English719 Add to Cart 4 days [Need to translate] Loose plate steel pipe flanges with weld-neck collar and with weld ring neck Obsolete GB/T 9120-2010
GB/T 9120.1-2000English239 Add to Cart 2 days [Need to translate] Loose plate steel pipe flanges with welding neck collar with raised face Obsolete GB/T 9120.1-2000
GB/T 9120.1-1988EnglishRFQ ASK 3 days [Need to translate] Loose plate steel pipe flanges with welding neck collar with raised face for PN 2. 5MPa (25 bar) Obsolete GB/T 9120.1-1988

PDF similar to GB/T 9120-2010


Standard similar to GB/T 9120-2010

GB/T 12385   GB/T 9125.2   GB/T 9125.1   GB/T 9126.2   GB/T 9128.1   GB/T 9126.1   

Basic data

Standard ID GB/T 9120-2010 (GB/T9120-2010)
Description (Translated English) Loose plate steel pipe flanges with weld-neck collar and with weld ring neck
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J15
Classification of International Standard 23.040.60
Word Count Estimation 18,114
Date of Issue 1/14/2011
Date of Implementation 10/1/2011
Older Standard (superseded by this standard) GB/T 10747-1989; GB/T 9120.1-2000; GB/T 9120.2-2000; GB/T 9120.3-2000
Quoted Standard GB/T 9112; GB/T 9124
Adopted Standard ASME B16.5-2009, MOD; EN 1092-1-2007, MOD
Regulation (derived from) Announcement of Newly Approved National Standards No. 2 of 2011
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This Standard specifies the nominal pressure PN marked with Loose plate welded steel pipe flange type, size, technical requirements and marking. This Standard is applicable to nominal pressure PN 2. 5 ~ PN 40 Loose plate of welded steel pipe flanges.

GB/T 9120-2010: Loose plate steel pipe flanges with weld-neck collar and with weld ring neck

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Loose plate steel pipe flanges with weld-neck collar and with weld ring neck ICS 23.040.60 J15 National Standards of People's Republic of China Replacing GB/T 9120.1 ~ 9120.3-2000, GB/T 10747-1989 Loose plate welded steel pipe flanges Issued on. 2011-01-14 2011-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 9112 ~ 9124-2010 "steel pipe flanges" series Standard is a modified ASMEB16.5-2009 "pipe flanges and flanged pipe Member (NPS⅟2 ~ NPS24) "and EN1092-1.2007" Flanges and their connecting pipes, valves, fittings and accessories, circular flange, PN identification - Part 1. Steel flanges. " ASMEB16.5-2009 is a complete standards for Class marks flange, EN1092-1.2007 is a complete standard PN mark on the flange. This series of standards using a combination of the above two criteria, including Mark the relevant technical content Class flange and flange PN mark. This series of standards for a total 13 standard, this standard is one of a standard. This standard EN1092-1.2007 standard main difference is as follows. --- The preparation of this standard format and EN1092-1.2007 different standards; --- EN1092-1.2007 standard does not include two DN175 and DN225 nominal size, according to users of marine flange Requirements, this series of standards PN flange marked increase of DN175 and DN225 only two male marine said flange size. This standard replaces GB/T 9120.1-2000 "sudden face welding Loose plate steel pipe flanges", GB/T 9120.2-2000 "uneven surface Loose plate welded steel pipe flanges ", GB/T 9120.3-2000" tongue and groove weld face Loose plate steel pipe flanges "and GB/T 10747-1989 "marine steel flanges welded steel ring-song set (four into bits)", compared with the original standard main changes are as follows. --- The original three butt Loose plate steel pipe flanges with GB/T 10747-1989 integrated as a standard; --- According to EN1092-1.2007 standard, adding a butt Loose plate steel pipe flange type, plate and welded ring Loose steel pipe flanges divided into A and B type two; --- According to EN1092-1.2007 standard, increasing the O-ring sealing surface type; --- According to EN1092-1.2007 standard, flange dimensions data PN-labeled comprehensive revision; --- PN flange marked increase in the DN175 and DN225 only two male Marine flange nominal size; --- Various sealing surface increases the scope of application form. The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee pipe accessories. This standard was drafted. the machine Productivity Promotion Center, Zhejiang Chaoda Valve Co., Ltd. The main drafters of this standard. to Qiu, Li Junying, Feng Feng, Lin Jie. This standard replaces the standards previously issued as follows. --- GB/T 9120.1 ~ 9121.6-1988, GB/T 9120.1 ~ 9120.3-2000; --- GB/T 10747-1989. Loose plate welded steel pipe flanges

1 Scope

This standard specifies the nominal pressure PN labeled with butt Loose plate steel pipe flange type, size, technical requirements and marking. This standard applies to nominal pressure plate welded ring PN2.5 ~ PN40 loose steel pipe flanges.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 9112 steel pipe flanges with type parameters GB/T 9124 steel pipe flanges

3 type and size

3.1 marked with PN butt Loose plate steel pipe flanges are divided into A and B two structural types, sealing surface type and applicable Nominal pressure and nominal size range specified in Table 1. Table 1 welded ring plate steel pipe flange sealing surface type and application of nominal pressure and nominal size range Flange Type Sealing surface Type Nominal PN2.5 PN6 PN10 PN16 PN25 PN40 A type butt Loose plate Steel pipe flanges (PL/WA) Raised face (RF) - - DN10 ~ DN600 Convex surface (MF) - - DN10 ~ DN600 Tongue and groove (TG) - - DN10 ~ DN600 O-ring face (OSG) - - DN10 ~ DN600 B-type butt Loose plate Steel pipe flanges (PL/WB) Raised face (RF) DN10 ~ DN1000 DN10 ~ DN1200 DN10 ~ DN1000 DN10 ~ DN800 DN10 ~ DN400 3.2 A labeled with PN-type butt Loose plate steel pipe flange type shall comply with Figs. 1 to 4, the flange sealing surface size Shall be in accordance with Table 2, the other flange dimensions should be consistent with the provisions of Table 6 - Table 3, when the user selected value is different from the values \u200b\u200bin the table S, It should specify when ordering. 3.3 with PN-labeled B-type butt Loose plate steel pipe flange type should meet the requirements of Figure 5, the flange sealing surface size should be consistent Specified in Table 2, the other flange dimensions comply with the requirements of Table 7 to Table 12, when the user selected value of S is different from the values \u200b\u200bin the table should be set Indication of goods.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 9120-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 9120-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 9120-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 9120-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 9120-2010?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 9120-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.