HOME   Cart(1)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 9117-2010 English PDF

US$599.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 9117-2010: Hubbed socket welding steel pipe flanges
Status: Obsolete

GB/T 9117: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 9117-2010English599 Add to Cart 4 days [Need to translate] Hubbed socket welding steel pipe flanges Obsolete GB/T 9117-2010
GB/T 9117.1-2000English199 Add to Cart 2 days [Need to translate] Hubbed socket welding steel pipe flanges with raised face Obsolete GB/T 9117.1-2000
GB/T 9117.1-1988EnglishRFQ ASK 3 days [Need to translate] Hubbed socked welding steel pipe flanges with flat face for PN 2. 0MPa (20 bar) Obsolete GB/T 9117.1-1988

PDF similar to GB/T 9117-2010


Standard similar to GB/T 9117-2010

GB/T 12385   GB/T 9125.2   GB/T 9125.1   GB/T 9126.2   GB/T 9126.1   

Basic data

Standard ID GB/T 9117-2010 (GB/T9117-2010)
Description (Translated English) Hubbed socket welding steel pipe flanges
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J15
Classification of International Standard 23.040.60
Word Count Estimation 15,141
Date of Issue 1/14/2011
Date of Implementation 10/1/2011
Older Standard (superseded by this standard) GB/T 9117.1-2000; GB/T 9117.2-2000; GB/T 9117.3-2000; GB/T 9117.4-2000
Quoted Standard GB/T 9112; GB/T 9124
Adopted Standard ASME B16.5-2009, MOD; EN 1092-1-2007, MOD
Regulation (derived from) Announcement of Newly Approved National Standards No. 2 of 2011
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This Standard specifies the nominal pressure PN marked with tape and marked with a Class neck socket welding steel pipe flange type, size, technical requirements and marking. This Standard is applicable to nominal pressure PN 10 ~ PN 100 and Class 150 ~ Class 1500 with neck socket welding steel pipe flanges.

GB/T 9117-2010: Hubbed socket welding steel pipe flanges

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Hubbed socket welding steel pipe flanges ICS 23.040.60 J15 National Standards of People's Republic of China Replacing GB/T 9117.1 ~ 9117.4-2000 With neck socket welding steel pipe flanges Issued on. 2011-01-14 2011-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 9112 ~ 9124-2010 "steel pipe flanges" series Standard is a modified ASMEB16.5-2009 "pipe flanges and flanged pipe Member (NPS⅟2 ~ NPS24) "and EN1092-1.2007" Flanges and their connecting pipes, valves, fittings and accessories, circular flange, PN identification - Part 1. Steel flanges. " ASMEB16.5-2009 is a complete standards for Class marks flange, EN1092-1.2007 is a complete standard PN mark on the flange. This series of standards using a combination of the above two criteria, including Mark the relevant technical content Class flange and flange PN mark. This series of standards for a total 13 standard, this standard is one of a standard. This standard ASMEB16.5-2009 and EN1092-1.2007 standard main difference is as follows. --- The preparation of this standard format ASMEB16.5-2009 and EN1092-1.2007 different standards; --- ASMEB16.5-2009 standard includes data Class400 nominal pressure of the flange, this standard does not incorporate Class400 Flange data; --- ASMEB16.5-2009 standard includes flange nominal size of the data NPS3⅟2, this standard does not NPS3⅟2 law LAN data; --- ASMEB16.5-2009 standard with inch bolt, bolt aperture is also used in inch sizes, this standard to metric bolts, Aperture pattern also uses metric dimensions; --- EN1092-1.2007 standard does not include ring joint face flange, according to our user's requirements, the standard adds the PN Ring joint face flange marks; --- EN1092-1.2007 standard with no neck socket welding steel pipe flanges, the present standard according to the actual needs of domestic users, an increase of PN series energetic socket welding steel pipe flanges. This standard replaces GB/T 9117.1-2000 "projecting face with neck socket welding steel pipe flanges", GB/T 9117.2-2000 "Hubbed Socket welding steel pipe flanges ", GB/T 9117.3-2000" tongue and groove with neck socket welding steel pipe flanges "and GB/T 9117.4-2000" ring Connecting surface with neck socket welding steel pipe flanges ", compared with the original standard main changes are as follows. --- The original four with neck socket welding steel pipe flanges standards into one standard; --- According to the actual needs of domestic users, increasing the nominal pressure range PN series with neck socket welding steel pipe flanges, for PN10 ~ PN160, nominal size range of DN10 ~ DN50; --- According ASMEB16.5-2009 standards for Class flange dimensions data were comprehensive revision; --- Increasing the variety of sealing surface of the scope of application form; --- Marked revised; --- According ASMEB16.5-2009, belonging to the original standard flange nominal inter-American system mark in the following table has been modified. PN20 to Class150, PN50 to Class300, PN110 to Class600, PN150 to Class900, PN260 to Class1500. The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee pipe accessories. This standard was drafted. the machine Productivity Promotion Center, Zhejiang Chaoda Valve Co., Ltd., Jiangsu Haida Pipe Fittings Co., Ltd., Hebei San Bao silver-day Group of high-pressure pipe flanges Limited, Paul Group Co., Ltd.. The main drafters of this standard. Li Junying, to Qiu, Li, Feng Feng, Li Bao silver, Zhang Xiaozhong, Lin Jie. This standard replaces the standards previously issued as follows. --- GB/T 9117.1 ~ 9117.8-1988, GB/T 9117.1 ~ 9117.4-2000. With neck socket welding steel pipe flanges

1 Scope

This standard specifies the nominal pressure and marked with a PN with Class labeled with neck socket welding steel pipe flange type, size, technology to be Sum mark. This standard applies to nominal pressure PN10 ~ PN100 and Class150 ~ Class1500 with neck socket welding steel pipe flanges.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 9112 steel pipe flanges with type parameters GB/T 9124 steel pipe flanges

3 type and size

3.1 with PN with neck socket welding steel pipe flanges mark the type and size 3.1.1 with PN with neck socket welding steel pipe flanges marked sealing surface type and application of nominal pressure and nominal size range according to Table 1 Provisions. Table 1 marked with a PN with neck socket welding steel pipe flange sealing surface type and application of nominal pressure and nominal size range Sealing surface Type Nominal PN10 PN16 PN25 PN40 PN63 PN100 Plane (FF) DN10 ~ DN50 - Raised face (RF) DN10 ~ DN50 Convex surface (MF) DN10 ~ DN50 Tongue and groove (TG) DN10 ~ DN50 O-ring face (OSG) DN10 ~ DN50 - Ring joint face (RJ) - DN15 ~ DN50 3.1.2 with PN labeled with neck socket welding steel pipe flange type should meet the requirements of Figure 1 to 6, flange sealing surface size should be consistent Table 2 and Table 3 provides that other flange dimensions shall comply with the requirements in Table 4 to Table 7.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 9117-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 9117-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 9117-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 9117-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 9117-2010?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 9117-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.