|
US$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 9096-2025: Sintered metal materials, excluding hardmetals - Charpy impact test method
Status: Valid GB/T 9096: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 9096-2025 | English | 169 |
Add to Cart
|
3 days [Need to translate]
|
Sintered metal materials, excluding hardmetals - Charpy impact test method
| Valid |
GB/T 9096-2025
|
| GB/T 9096-2002 | English | 159 |
Add to Cart
|
3 days [Need to translate]
|
Sintered metal materials, excluding hard metals -- Impact test method
| Valid |
GB/T 9096-2002
|
| GB/T 9096-1988 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Sintered metals materials, excluding hardmetals--Impact test method
| Obsolete |
GB/T 9096-1988
|
PDF similar to GB/T 9096-2025
Basic data | Standard ID | GB/T 9096-2025 (GB/T9096-2025) | | Description (Translated English) | Sintered metal materials, excluding hardmetals - Charpy impact test method | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | H16 | | Classification of International Standard | 77.160 | | Word Count Estimation | 8,884 | | Date of Issue | 2025-06-30 | | Date of Implementation | 2026-01-01 | | Older Standard (superseded by this standard) | GB/T 9096-2002 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 9096-2025: Sintered metal materials, excluding hardmetals - Charpy impact test method---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT9096-2025
ICS 77.160
CCSH16
National Standard of the People's Republic of China
Replaces GB/T 9096-2002
Sintered metal materials (excluding cemented carbide)
Charpy impact test method
Released on June 30, 2025
Implementation on January 1, 2026
State Administration for Market Regulation
The National Standardization Administration issued
Table of Contents
Preface III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Principle 1
5 Instruments and Equipment 2
6 Sample 2
7 Test Step 3
8 Uncertainty of absorbed energy K 4
9 Test Report 4
Figure 1 Unnotched standard specimen 2
Figure 2 Small size specimen without notch 3
Figure 3 U-notch specimen 3
Preface
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
This document replaces GB/T 9096-2002 "Sintered metal materials (excluding cemented carbide) impact test method" and GB/T 9096-
Compared with.2002, in addition to structural adjustments and editorial changes, the main technical changes are as follows.
a) Delete "at room temperature" from the scope (see Chapter 1 of the.2002 edition);
b) “impact absorbed energy” is changed to “absorbed energy” (see Chapter 1, Chapter 1 of the.2002 edition);
c) The terms and definitions have been changed (see Chapter 3, Chapter 3 of the.2002 edition);
d) Added “Test Principles” (see Chapter 4);
e) The requirements for the testing machine energy specification of "30J/50J" and the impact speed of "3.0m/s~5.0m/s" have been deleted (see 5.1 of the.2002 edition);
f) Added requirements for the use of pendulum (see 5.2);
g) Changed the requirements for measuring instruments (see 5.3, 5.2 of the.2002 edition);
h) The requirements for unnotched standard specimens have been changed, and unnotched small-size specimens, U-notched specimens, and other specifications of specimens have been added.
(See 6.2, 4.2 of the.2002 edition);
i) Deleted the chapter “Test Requirements” (see Chapter 6 of the.2002 edition);
j) Added a chapter on "Test Procedures" (see Chapter 7);
k) Added a chapter on "Uncertainty of Absorbed Energy K" (see Chapter 8);
l) The requirements in the “Test Report” have been changed (see Chapter 9, Chapter 8 of the.2002 edition).
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document is proposed and coordinated by the China Machinery Industry Federation.
This document was drafted by. Dongmu New Materials Group Co., Ltd., Höganäs (China) Co., Ltd., Kunming University of Science and Technology, South China University of Technology
University of Science and Technology, Meters Industrial Systems (China) Co., Ltd., Shanxi Dongmu Huasheng Powder Metallurgy Co., Ltd., Shanxi Xinsheng New Materials Co., Ltd.,
University of Science and Technology Beijing.
The main drafters of this document are. Bao Chongxi, Sun Zeyu, Tan Zhaoqiang, Fang Dong, Xiao Zhiyu, Zhang Qing, Fu Yuanfang, Zhou Guozhen, Feng Weili, Yao Keying,
Yang Fang.
The previous versions of this document and the documents it replaces are as follows.
---First published in 1988 as GB/T 9096-1988;
---First revised in.2002;
---This is the second revision.
Sintered metal materials (excluding cemented carbide)
Charpy impact test method
Safety precautions---This document does not specifically point out all safety issues. If there are any safety issues, they are also provided in combination with the usage situation.
It is the responsibility of the user of this document to establish appropriate safety and health protection measures and to determine the applicability of relevant regulations before use.
1 Scope
This document describes the Charpy impact test method for sintered metallic materials (excluding cemented carbides).
This document is applicable to the determination of the absorbed energy of sintered metal specimens in the simply supported beam (Charpy) state when they break under a single impact load.
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
GB/T 229-2020 Charpy pendulum impact test method for metallic materials
GB/T 2975 Sampling location and specimen preparation for mechanical property tests on steel and steel products
GB/T 3808 Inspection of pendulum impact testing machines
GB/T 5318 Sintered metal materials (excluding cemented carbide) Unnotched impact test specimens
GB/T 8170 Rules for rounding off values and expression and determination of limit values
GB/T 10623 Terminology for testing mechanical properties of metallic materials
JJG145 Verification Procedure for Pendulum Impact Testing Machine
3 Terms and Definitions
The terms and definitions defined in GB/T 10623 apply to this document.
3.1
absorbed energy
The difference between the potential energy of the pendulum before impact and the residual energy of the cross section of the sample after fracture, and the wind resistance and friction loss have been compensated,
Read out on the reading device.
[Source. GB/T 10623-2008, 6.1.1]
3.2
testpiecesupports
The part of the impact machine that provides the proper position for the impact specimen, involving the center of the pendulum impact, the impact hammer blade and the anvil.
NOTE. The support surface is perpendicular to the support surface of the anvil and the impact edge.
[Source. GB/T 10623-2008, 6.1.11]
4 Principles
Place the sample of specified geometric shape between the two sample supports of the testing machine, break the sample once with a pendulum, and measure the absorption of the sample.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 9096-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 9096-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 9096-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 9096-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 9096-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 9096-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|