|
US$439.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 8656-2018: Emulsion and solution -- Polymerized styrene-butadiene rubber (SBR) -- Evaluation procedures
Status: Valid GB/T 8656: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 8656-2018 | English | 439 |
Add to Cart
|
4 days [Need to translate]
|
Emulsion and solution -- Polymerized styrene-butadiene rubber (SBR) -- Evaluation procedures
| Valid |
GB/T 8656-2018
|
| GB/T 8656-1998 | English | 479 |
Add to Cart
|
3 days [Need to translate]
|
Styrene-butadiene rubber(SBR). Emulsion and solution-polymerized types. Evaluation procedures
| Obsolete |
GB/T 8656-1998
|
| GB/T 8656-1993 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Rubber, styrene-butadiene (SBR). Emulsion-polymerized types. Test recipes and evaluation of vulcanization characteristics
| Obsolete |
GB/T 8656-1993
|
PDF similar to GB/T 8656-2018
Standard similar to GB/T 8656-2018 GB/T 40125 GB/T 8655 GB/T 36089 GB/T 8659 Basic data | Standard ID | GB/T 8656-2018 (GB/T8656-2018) | | Description (Translated English) | Emulsion and solution -- Polymerized styrene-butadiene rubber (SBR) -- Evaluation procedures | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G35 | | Classification of International Standard | 83.060 | | Word Count Estimation | 22,261 | | Date of Issue | 2018-12-28 | | Date of Implementation | 2019-11-01 | | Older Standard (superseded by this standard) | GB/T 8656-1998 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 8656-2018: Emulsion and solution -- Polymerized styrene-butadiene rubber (SBR) -- Evaluation procedures
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Emulsion--and solution--polymerized styrene--butadiene rubber(SBR)--Evaluation procedures
ICS 83.060
G35
National Standards of People's Republic of China
Replace GB/T 8656-1998
Emulsion and solution polymerization styrene-butadiene
Rubber (SBR) evaluation method
(ISO 2322.2014, Styrene-butadienerubber (SBR)-
Emulsion-andsolution-polymerizedtypes-Evaluationprocedures, MOD)
Published on.2018-12-28
2019-11-01 implementation
State market supervision and administration
China National Standardization Administration issued
Content
Foreword III
1 Scope 1
2 Normative references 1
3 Sampling and sample preparation 2
4 Physical and chemical tests of raw rubber 2
4.1 Mooney viscosity 2
4.2 Volatile 2
4.3 Ash 2
5 Preparation of evaluation rubber for mixing 2
5.1 Standard Test Formula 2
5.2 Optional oil-filled test formula 3
5.3 Procedure 4
6 Evaluation of vulcanization characteristics by vulcanizer 7
6.1 Evaluation with a disc oscillation vulcanizer 7
6.2 Evaluation with a non-rotor vulcanizer 8
7 vulcanized rubber tensile stress-strain performance evaluation 8
8 precision 8
9 Test report 8
Appendix A (informative) Precision 10
Appendix B (informative) Example 16
Reference 17
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 8656-1998 "Evaluation method for emulsion and solution polymerization type styrene-butadiene rubber (SBR)". versus
Compared with GB/T 8656-1998, the main technical changes are as follows.
--- Revised the normative reference document (see Chapter 2, Chapter 2 of the.1998 edition);
--- Increased requirements for compounding agents (see Table 2);
--- Added an open mill mixing procedure for oil-filled test formulations (see 5.3.2.2);
--- Added a single-stage mixing procedure for the method B laboratory internal mixer (see 5.3.3);
--- Removed the method C small mixer mixing operation steps, and moved the contents of the initial mixing mixer and the final mixing mill
Into the text (see 5.3.4, 5.3.3 of the.1998 edition);
--- Move the relevant content of the method A mixer in the precision into the appendix (see A.2);
--- Removed the precision method C small mixer mixing (see 8.2 of.1998 edition);
--- Increased the precision of the mixing mill and the mixing precision of the mixer obtained by the ITP in.2003 and the density obtained by the.2017 ITP.
The initial mixing of the mixer and the final mixing precision of the mill (see A.3, A.4);
--- Removed the Precision Results User Guide and adjusted the description of the precision results to Appendix B (see Appendix B,.1998 Edition)
Appendix B, Appendix C).
This standard uses the redrafting method to modify the use of ISO 2322.2014 "styrene-butadiene rubber (SBR) emulsion and solution polymerization type
Evaluation method.
The technical differences between this standard and ISO 2322.2014 and their reasons are as follows.
---About the normative reference documents, this standard has made technical adjustments to adapt to China's technical conditions, adjustments
The situation is reflected in Chapter 2, “Regulatory References”, and the specific adjustments are as follows.
● Replace ISO 37 with GB/T 528 equivalent to the international standard;
● Replace ISO 289-1 with GB/T 1232.1 equivalent to the international standard;
● Replace ISO 23529 with GB/T 2941 equivalent to the international standard;
● Replaced ISO 247.2006 with GB/T 4498.1 modified to adopt international standards;
● Replace ISO 2393 with GB/T 6038 modified to international standards;
● Replace ISO 3417 with GB/T 9869 equivalent to the international standard;
● Replace ISO 1795 with GB/T 15340 equivalent to the international standard;
● Replace ISO 248-1 with GB/T 24131.1 modified to adopt international standards;
● Replace ISO 248-2 with GB/T 24131.2 modified to international standards;
● Replace ISO 6502 with GB/T 25268 equivalent to the international standard;
● Added ASTM D3185.
--- Increased the requirements for compounding agents to make the evaluation results comparable (see Table 2).
--- Increased the mixing ratio of the open mill and small mixer to facilitate the implementation of the standard (see Table 3).
--- Added an open mill mixing procedure for oil-filled test formulations to meet the needs of our users (see 5.3.2.2).
This standard has made the following editorial changes.
--- Modified the standard name;
--- Appendix A adds "the precision of the initial mixing of the mixer and the final mixing of the mill in.2017" (see A.4).
This standard was proposed by the China Petroleum and Chemical Industry Federation.
This standard is under the jurisdiction of the National Rubber and Rubber Products Standardization Technical Committee (SAC/TC35).
This standard was drafted. China Petroleum and Natural Gas Co., Ltd. Jilin Petrochemical Company, China National Petroleum Corporation Stone
Oil Chemical Research Institute, China National Petroleum Corporation Dushanzi Petrochemical Company, Shenhua Chemical Industry Co., Ltd., Yiweiyi Rubber
Research Institute Co., Ltd., China Petroleum and Chemical Corporation Qilu Branch, Yikai New Materials Co., Ltd., China National Petroleum Corporation
Lanzhou Petrochemical Company, China Petrochemical Co., Ltd. Beijing Yanshan Branch, Double Star Group Co., Ltd.
The main drafters of this standard. Li Li, Han Yan, Wei Yuli, Zhang Xinrong, Yao Xiaohui, Kong Xiangpeng, Sun Xiulian, Wang Zhaode, Wang Xiaowei, Li Qiang,
Yu Hongguang, Guo Fei, and Qi Yueqin.
The previous versions of the standards replaced by this standard are.
---GB/T 8656-1988, GB/T 8656-1993, GB/T 8656-1998.
Emulsion and solution polymerization styrene-butadiene
Rubber (SBR) evaluation method
Caution - Personnel using this standard should have practical experience in formal laboratory work. This standard does not indicate all possible security questions.
question. It is the responsibility of the user to take appropriate safety and health measures and to ensure compliance with the relevant national laws and regulations.
1 Scope
This standard specifies.
---Physical and chemical test methods for raw rubber;
---Standard materials used to evaluate the vulcanization characteristics of emulsion and solution polymerized styrene-butadiene rubber (SBR) (including oil-filled rubber),
Standard test formula, equipment and operating procedures.
This standard applies to the rubbers listed in Table 1. These rubbers are usually used in the form of vulcanized rubber.
Table 1 Styrene-butadiene raw rubber type
rubber
(oil-filled or not oil-filled)
Copolymer type
Styrene
Total content
(quality score) /%
Block content
(quality score) /%
A series
Milk poly SBR
Soluble SBR
Soluble SBR
Random
Random
Partial block
≤50
≤50
≤50
≤30
B series
Milk poly SBR
Soluble SBR
Soluble SBR
Random
Random
Partial block
>50
>50
≤50
>30
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 528 Determination of tensile stress-strain properties of vulcanized rubber or thermoplastic rubber (GB/T 528-2009, ISO 37.2005,
IDT)
GB/T 1232.1 Determination of non-vulcanized rubber - Part 1 . Determination of Mooney viscosity
(GB/T 1232.1-2016, ISO 289-1..2014, IDT)
GB/T 2941 Rubber physical test method General procedure for preparation and adjustment of specimens (GB/T 2941-2006, ISO 23529.2004,
IDT)
GB/T 4498.1 Determination of rubber ash - Part 1 . Muffle furnace method (GB/T 4498.1-2013, ISO 247.2006,
MOD)
GB/T 6038 rubber test compound compounding, mixing and vulcanization equipment and operating procedures (GB/T 6038-2006, ISO 2393.
|