US$579.00 ยท In stock Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 8582-2008: Terminology for mechanical structures of electrotechnical and electronic equipment Status: Valid GB/T 8582: Evolution and historical versions
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
GB/T 8582-2008 | English | 579 |
Add to Cart
|
5 days [Need to translate]
|
Terminology for mechanical structures of electrotechnical and electronic equipment
| Valid |
GB/T 8582-2008
|
GB/T 8582-2000 | English | 919 |
Add to Cart
|
6 days [Need to translate]
|
Mechanical structure terminology of electrical and electronic equipment
| Obsolete |
GB/T 8582-2000
|
GB/T 8582-1988 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Terminology for mechnaical structres for electrotechnical and electronic equipment
| Obsolete |
GB/T 8582-1988
|
PDF similar to GB/T 8582-2008
Basic data Standard ID | GB/T 8582-2008 (GB/T8582-2008) | Description (Translated English) | Terminology for mechanical structures of electrotechnical and electronic equipment | Sector / Industry | National Standard (Recommended) | Classification of Chinese Standard | K05 | Classification of International Standard | 31.240 | Word Count Estimation | 25,226 | Date of Issue | 2008-06-19 | Date of Implementation | 2009-04-01 | Older Standard (superseded by this standard) | GB/T 8582-2000 | Regulation (derived from) | Announcement of Newly Approved National Standards No. 10 of 2008 (total 123) | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | Summary | This standard specifies the mechanical structure of the electrical and electronic equipment generic term. This standard applies to electrical and electronic equipment mechanics areas of expertise, for revision of the standard, scientific literature and writing and publishing books, the mechanical structure of corporate management, product development and design use. |
GB/T 8582-2008: Terminology for mechanical structures of electrotechnical and electronic equipment ---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Terminology for mechanical structures of electrotechnical and electronic equipment
ICS 31.240
K05
National Standards of People's Republic of China
Replacing GB/T 8582-2000
Electrical and electronic equipment mechanical structure terminology
Posted 2008-06-19
2009-04-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard replaces GB/T 8582-2000 "electrical and electronic equipment mechanical structural terms."
This standard compared with GB/T 8582-2000, the main changes are as follows.
--- According to GB/T 19290.1 \u200b\u200bmodify GB/T 8582-2000 in the corresponding terms and definitions;
--- For the GB/T 19290.1 \u200b\u200band has been included in the GB/T 8582-2000 some of the terminology and definitions that are not in accordance with
GB/T 19290.1 \u200b\u200bsupplement;
--- Remove GB/T 8582-2000 term no longer applies;
--- Revised GB/T 8582-2000 in error;
--- Added some necessary terms.
The standard electrical and electronic equipment by the National Standardization Technical Committee integrated structure (SAC/TC34) and focal points.
This standard was drafted. ZTE Corporation, the Quartet Electric (Group) Co., Ltd., Huawei Technologies Co., Ltd., State Grid
Nanjing Automation Research Institute, Guodian Nanjing Automation Co., Ltd.
The main drafters of this standard. Wang Wei, Aijun, Tian Heng, Zhang Kaiguo, real Zhang, Zhang Yu, Wu Bei.
Previous editions of the publication of this standard is replaced by.
--- GB/T 8582-1988;
--- GB/T 8582-2000.
Electrical and electronic equipment mechanical structure terminology
1 Scope
This standard specifies the general term electrical and electronic equipment mechanical structure.
This standard applies to electrical and electronic equipment construction machinery specialized for the revision of the standard, scientific literature and write books and publishing companies
The mechanical structure of product development, design and management use.
2 orientation (see Table 1)
Table 1
No. Definition schematic
2.1
width
In the three-dimensional coordinates apparatus (see FIG. 1) of the X-axis
Direction (lateral direction) occupied size (see Figure 2
In W)
2.2
depth
In the three-dimensional coordinates of the device (see FIG. 1) of the Y-axis
Direction (longitudinal direction) occupied size (see Figure 2
In D)
2.3
height
In the three-dimensional coordinates of the device (see FIG. 1) of the Z-axis
Direction (vertical direction) occupied size (see Figure 2
The H)
2.4
front
front
Equipment and operator monitoring opposing major surfaces
Or operating surface ships equipped monitor or operating components
(See FIG. 2)
Figure 1
2.5
Behind
rear; back
Previous apparatus opposite surface (see FIG. 2)
2.6
left
left
In the left side surface of the operator device (see Figure 2)
2.7
The right
right
In the right side surface of the operator of the device (see Figure 2)
2.8
Top surface
top
Equipment for the top (see Figure 2)
2.9
Bottom surface
bottom
Equipment for the bottom (see Figure 2) Figure 2
2.10
Monitoring surface
monitoringsurface
Installation monitoring and measurement components of the surface
2.11
Operating surface
operatingsurface
The main components of the surface mounting operation
|