|
US$1159.00 · In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 8190.9-2017: Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
Status: Valid GB/T 8190.9: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 8190.9-2017 | English | 1159 |
Add to Cart
|
7 days [Need to translate]
|
Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
| Valid |
GB/T 8190.9-2017
|
| GB/T 8190.9-2010 | English | RFQ |
ASK
|
6 days [Need to translate]
|
Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
| Obsolete |
GB/T 8190.9-2010
|
PDF similar to GB/T 8190.9-2017
Basic data | Standard ID | GB/T 8190.9-2017 (GB/T8190.9-2017) | | Description (Translated English) | Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J90 | | Classification of International Standard | 27.020 | | Word Count Estimation | 58,586 | | Date of Issue | 2017-07-12 | | Date of Implementation | 2018-02-01 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 8190.9-2017: Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Reciprocating internal combustion engines - Exhaust emission measurement - Part 9. Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
ICS 27.020
J90
National Standards of People's Republic of China
Replacing GB/T 8190.9-2010
Reciprocating internal combustion engines - Part 9. Measurement of emissions.
Test of Exhaust Smoke Degree in Compression Ignition Engine Transient Condition
Test cycle for measuring and testing procedures
Reciprocating internal combustion engines-Exhaustemissionmeasurement-Part 9.
(ISO 8178-9.2012, IDT)
2017-07-12 Posted on.2018-02-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
China National Standardization Administration released
Directory
Foreword Ⅲ
Introduction Ⅴ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 symbols and units 3
5 Test conditions 5
5.1 Test environmental conditions 5
5.2 Power 5
5.3 engine intake system 5
5.4 Engine Exhaust System 5
5.5 Cooling System 6
5.6 Lubricants 6
5.7 Engine with charge air cooling 6
5.8 Test fuel temperature 6
6 Test fuel 6
7 measuring equipment and accuracy 7
7.1 General 7
7.2 dynamometer technical specifications 7
7.3 smoke measuring instrument 7
7.4 Accuracy 8
8 extinction smoke meter calibration 8
8.1 General 8
8.2 Calibration Procedure 8
9 test run 9
9.1 Installation of measuring instruments 9
9.2 calibration extinction smoke meter 9
9.3 Test cycle 9
9.4 Determination of the effective length of optical channels (LA) 9
Data Evaluation and Calculation 9
10.1 Data Evaluation 9
Bezier algorithm
10.3 Environmental Amendments 12
10.4 Test Report 13
11 smoke determination 13
11.1 General 13
11.2 full flow extinction smoke meter 13
11.3 Partial flow extinction smoke meter 15
Appendix A (Normative) Off-road testing of variable speed operation of the engine 18
Appendix B (Normative) Non-road test cycle with a constant speed engine
Appendix C (Informative) Notes on the test cycle 28
Appendix D (informative) Calculation program example 29
Appendix E (Normative) Test cycle for marine propulsion engines 41
Appendix F (Normative) Variable speed operation of Category F engine (locomotive traction) test cycle 46
Reference 49
Foreword
GB/T 8190 "Reciprocating internal combustion engine emission measurement" is divided into 11 parts.
--- Part 1. Test bench measurement of gas and particulate emissions;
--- Part 2. Field measurements of gas and particulate emissions;
--- Part 3. Definition and measurement of exhaust smoke at steady-state conditions;
--- Part 4. Test cycles for different uses of the engine;
--- Part 5. Test fuel;
--- Part 6. Measurement results and test reports;
--- Part 7. Determination of the engine family;
--- Part 8. Determination of the engine group;
--- Part 9. Compression ignition engine transient conditions exhaust smoke test bench test cycle and test procedures;
--- Part 10. Compression ignition engine transient conditions exhaust smoke field measurement test cycle and test procedures;
--- Part 11. Tester measurements of transient emissions of gases and particulate emissions from non-road mobile machinery engines.
This section GB/T 8190 Part 9.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This Part replaces GB/T 8190.9-2010 "Reciprocating internal combustion engine emission measurement Part 9. Compression-ignition engine transient conditions row
Gas smoke test bench test cycle and test procedures. " The main technical changes compared with GB/T 8190.9-2010 are as follows.
--- Modify the normative references (see Chapter 2,.2010 version Chapter 2);
--- Modify the requirements of the test conditions (see 5.1.1 and 5.1.2,2010 version 5.1.1 and 5.1.2);
--- Modify the accuracy of measuring equipment (see 7.3.2.3 and 8.2.2, see the.2010 version 7.3.2.3 and 8.2.2);
--- Modify the environmental requirements (see 10.3.1,2010 version 10.3.1);
--- Re-arrangement of the smoke measurement program (see Chapter 11,.2010 Edition Chapter 11);
--- Modify the layout of the figure;
--- Modified non-road variable speed operation of the engine test cycle (see Appendix A,.2010 edition Appendix A).
This section uses the translation method identical with ISO 8178-9.2012 "Reciprocating internal combustion engine emission measurement Part 9. Compression ignition
Machine transient operating conditions exhaust smoke test rig test cycle and test procedures. "
The documents of our country that are consistent with the corresponding international documents that are normative references in this section are as follows.
--- Reciprocating internal combustion engine driven alternator GB/T 2820.1-2009 - Part 1 - uses, quotas and performance
(ISO 8528-1.2005, IDT)
--- GB/T 8190.5-2011 Reciprocating internal combustion engine emission measurement Part 5. Test fuel (ISO 8178-5.2008,
IDT)
--- GB/T 8190.6-2006 Reciprocating internal combustion engine emission measurement Part 6. Measurement results and test reports (ISO 8178-
6.2000, IDT)
Reciprocating internal combustion engines - Emission measurement - Part 7. Determination of family of engines (ISO 8178-7..2003);
1996, IDT)
Reciprocating internal combustion engines - Emission measurement - Part 8. Determination of the engine train set - ISO 8178-8-2003.
1996, IDT)
This part is proposed by China Machinery Industry Federation.
This part of the National Internal Combustion Engine Standardization Technical Committee (SAC/TC177) centralized.
This part of the drafting unit. Shanghai Internal Combustion Engine Research Institute, Kunming Yun Nei Power Co., Ltd., Guangxi Yuchai Machinery Co., Ltd.,
Jiangsu Sida Power Machinery Group Co., Ltd., Shanghai Automotive Group Co., Ltd. Commercial Vehicle Technology Center, Shanghai Diesel Engine Co., Ltd.
Secretary, Ningbo 318 Electronic Appliance Co., Ltd.
The main drafters of this section. Qiu Weibing, Chen Yunqing, Xia Yue Li, Lin Tiejian, Wang Xiwu, Qiao Liangliang, Xie Zhengliang, Yang Shiqing, Huang Minqin,
Zhang Longbing, Meng Hongxia, Hu Huixiang, Zhuang Guogang.
This part replaces the standards previously issued as.
--- GB/T 8190.9-2010.
Introduction
There are many different smoke measurement protocols in the world today. Some smoke measurement procedures are designed for test bench testing to certify
Or type approval; others are designed for field trials for monitoring and maintenance testing. Different smoke measurement procedures co-exist to meet each
Requirements of regulatory agencies and industrial sectors. Two typical methods of smoke measurement are filter paper smoke meter and extinction smoke meter method.
This part of GB/T 8190 incorporates the main technical characteristics of the existing smoke measurement procedures to the greatest extent possible. GB/T 8190 of the first 4
Section provides for a number of test cycles to determine the emissions of non-road-use engine gases and particles. GB/T 8190 Part 4 of the test
The cycle is designed for the different working characteristics of all types of non-road machinery. Again, different smoke test cycles are available for different types
Off-road engines and machinery. In GB/T 8190.4, allows the use of different steady-state conditions to characterize and control the non-road use of the engine
Gas and particulate emissions. In order to properly characterize and control the smoke emissions of engines of various uses, a transient test cycle is required.
GB/T 8190 This section is used for compression ignition engine smoke measurement. This section applies to speed or load or both at any time
Interchangeable engine operating under transient conditions. It should be noted that the maintenance of a typical natural aspirated engine row under transient conditions
Gas smoke is usually the same as its steady state exhaust smoke.
Only extinction smoke meter can be used for smoke measurement GB/T 8190 provisions of this section allows the use of full or partial flow smoke extinction
Gauge, this section considers the difference between the response time of these two types of smokeless smoke meter, but did not consider any difference caused by the sampling zone temperature
difference.
The test cycle specified in Annex E represents the engine used for the purposes described in the E1, E2, E3 and E5 cycles of IEC 60068-1.
The test cycles specified in Annex F represent the engine used for the purpose described in Cycle F of GB/T 8190.4.
Reciprocating internal combustion engines - Part 9. Measurement of emissions.
Test of Exhaust Smoke Degree in Compression Ignition Engine Transient Condition
Test cycle for measuring and testing procedures
1 Scope
GB/T 8190 provisions of this part of the test bench to assess the compression ignition engine exhaust smoke test cycle and test procedures.
For transient smoke test cycles, smokes should be measured using a smoke meter operating according to the principle of extinction. This section is intended to provide smoke test cycle
As well as methods of measuring and analyzing smoke. The detailed rules for the measurement of smoke using the principle of extinction are given in ISO 11614.1999. Chapter 1 of this section
The test procedures and measuring methods specified in Chapter 11 apply to reciprocating internal combustion engines. However, for each use of the engine can only use the regulations of this section
A test cycle to be assessed. Appendix A, Appendix B, Appendix E and Appendix F each contain a list of only suitable for the scope of the appendix
The purpose of the engine. The smoke test cycles specified in the appendix can also be used for the types of engines and machines specified in ISO /
For some off-road engines, a smoke test on site must be carried out without having to conduct a test bench smoke test. For additional requirements
(Such as occupational health and safety regulations) of the machinery used in the engine may require additional test conditions and a dedicated evaluation method.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 8190.4-2010 Reciprocating internal combustion engine emission measurement - Part 4. Steady-state test cycles for engines of different uses
(ISO 8178.4.2007, IDT)
ISO 8178-5 Reciprocating internal combustion engine emission measurement Part 5. Test fuel (Reciprocatinginternalcombustion
engines-Exhaustemissionmeasurement-Part 5.Testfuels)
ISO 8178-6 Reciprocating internal combustion engines - Part 6. Measurement of emissions and test reports (Reciprocating internal
combustionengines-Exhaustemissionmeasurement-Part 6.Reportofmeasuringresultsandtest)
ISO 8178-7 Reciprocating internal combustion engine emission measurement Part 7. Determination of the engine family (Reciprocating internal
combustionengines-Exhaustemissionmeasurement-Part 7.Enginefamilydetermination)
ISO 8178-8 Reciprocating internal combustion engine emission measurement - Part 8. Determination of engine group (Reciprocating internal
combustionengines-Exhaustemissionmeasurement-Part 8.Enginegroupdetermination)
ISO 8528-1 Reciprocating internal combustion engine driven alternating current generating sets - Part 1. Applications, quotas and performance (Reciprocatingin-
ternalcombustionenginedrivenalternatingcurrentgeneratingsets-Part 1.Application, rating
andperformance
ISO 11614.1999 Reciprocating Compression Ignition Engines Opaque Measuring Instruments and Determination of Exhaust Gas Absorption Coefficient (Reciprocating
internalcombustioncompression-ignitionengines-Apparatusformeasurementoftheopacityandfor
determinationofthelightabsorptioncoefficientofexhaustgas)
3 Terms and definitions
The following terms and definitions apply to this document.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 8190.9-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 8190.9-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 8190.9-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 8190.9-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 8190.9-2017?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 8190.9-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|