|
US$359.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 8022-2019: Determination of demulsibility characteristics of lubricating oils
Status: Valid GB/T 8022: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 8022-2019 | English | 359 |
Add to Cart
|
4 days [Need to translate]
|
Determination of demulsibility characteristics of lubricating oils
| Valid |
GB/T 8022-2019
|
| GB/T 8022-1987 | English | 439 |
Add to Cart
|
3 days [Need to translate]
|
Lubricating oils. Determination of demulsibility characteristics
| Obsolete |
GB/T 8022-1987
|
PDF similar to GB/T 8022-2019
Basic data | Standard ID | GB/T 8022-2019 (GB/T8022-2019) | | Description (Translated English) | Determination of demulsibility characteristics of lubricating oils | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | E34 | | Classification of International Standard | 75.100 | | Word Count Estimation | 18,145 | | Date of Issue | 2019-10-18 | | Date of Implementation | 2020-05-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 8022-2019: Determination of demulsibility characteristics of lubricating oils---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Determination of demulsibility characteristics of lubricating oils
ICS 75.100
E34
National Standards of People's Republic of China
Replace GB/T 8022-1987
Lubricating oil resistance test method
Published on.2019-10-18
2020-05-01 implementation
State market supervision and administration
China National Standardization Administration issued
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 8022-1987 "Determination of anti-emulsification performance of lubricating oil". This standard is compared with GB/T 8022-1987
The technical changes are as follows.
--- Added introduction;
--- The method is divided into two parts. Method A and Method B. Method A is applicable to samples without extreme pressure agent, and Method B is applicable to
Samples with extreme pressure agents (see Chapter 1);
--- Add a chapter on normative references (see Chapter 2);
--- Added the content of the test containing the extreme pressure agent (see Chapter 3, Chapter 7);
--- Modified the preparation temperature of the toluene water saturated solution, the temperature of the centrifuge tube and the temperature during centrifugation (see Chapter 7, Appendix B);
--- Increased the requirements for the calibration of centrifuge tubes (see Chapter 7);
--- Revised the calculation of the percentage of water in the oil (see Chapter 8);
--- GB/T 8022-1987 Appendix A "Extreme Pressure Lubricating Oil Detergency Performance Determination Method" into the standard text, the original GB/T 8022-
Appendix B of 1987 was changed to Appendix A;
--- Increase the preparation of Appendix B toluene water saturated solution.
This standard is proposed and managed by the National Petroleum Products and Lubricants Standardization Technical Committee (SAC/TC280).
This standard was drafted. Yanhua Branch of Sinopec Lubricant Co., Ltd.
The main drafters of this standard. Tian Deying, Chen Yonghong, Zhang Min.
The previous versions of the standards replaced by this standard are.
---GB/T 8022-1987.
Introduction
Lubricating oil is susceptible to water contamination during use, and pumping and circulating turbulence may result in the formation of water-in-oil emulsions. This method is for this
The determination of the anti-emulsification properties of lubricating oils is instructive.
Lubricating oil resistance test method
Caution - Personnel using this standard should have practical experience in formal laboratory work. This standard does not indicate all possible security questions.
question. It is the responsibility of the user to take appropriate safety and health measures and to ensure compliance with the conditions set by the relevant national regulations.
1 Scope
This standard specifies the determination of the anti-emulsification ability of lubricating oil products.
This standard is applicable to the determination of the separation of oil and water from high and medium viscosity lubricants. Method A is suitable for samples that do not contain extreme pressure agents.
Method B is suitable for samples containing extreme pressure agents.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 4756 petroleum liquid manual sampling method
GB/T 6682-2008 Analytical laboratory water specifications and test methods
3 Method summary
3.1 Method A. Add 405mL oil sample and 45mL secondary water in a special separatory funnel, stir at a certain speed at 82 °C
5 min, after standing for 5 h, measure and record the volume of water separated in the oil, the volume of the emulsion and the percentage of water in the oil.
3.2 Method B. Add 360 mL oil sample and 90 mL secondary water to a special separatory funnel and stir at a certain speed at 82 °C.
5 min, after standing for 5 h, measure and record the volume of water separated in the oil, the volume of the emulsion and the percentage of water in the oil.
4 instruments
4.1 Stirrer. The speed meets 4500r/min±500r/min and 2500r/min±250r/min. The detailed structure is shown in Figure 1, Figure 2 and
image 3.
Note. Air motors are recommended to avoid spark damage.
4.2 Separating funnel. 500mL, the minimum scale is 5mL; borosilicate heat-resistant glass tube, standard wall thickness, outer diameter of about 54mm, as shown in Figure 4.
4.3 Constant temperature bath. At least two separatory funnels should be immersed, and the constant temperature medium can be immersed in the 500 mL mark line of the separatory funnel. Thermostatic bath
Maintain at 82 ° C ± 1 ° C, and can fix the separatory funnel. When mixing oil and water, the vertical centerline of the separatory funnel should be with the agitator
The vertical axis coincides.
Note. Silicone oil is not recommended as a constant temperature medium because any contamination into the oil-water mixture can lead to erroneous results.
4.4 Centrifuge. The specific technical requirements are as follows.
a) enable two or more liquid-filled centrifuge tubes to produce 500-800 relative centrifugal force (rcf) at the tip of the centrifuge tube
Rotate down.
b) The rotor, trunnion, trunnion cup and cushion of the centrifuge should be tightly coupled to withstand the maximum centrifugal force. Trunnion cup when centrifuged
And the buffer should be firmly fixed to the centrifuge tube. In order to reduce the damage caused by broken parts, the centrifuge should be metal with a certain strength.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 8022-2019_English be delivered?Answer: Upon your order, we will start to translate GB/T 8022-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 8022-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 8022-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 8022-2019?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 8022-2019 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|