|
US$559.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 7920.17-2009: Steel reinforcement (bar) processing machinery -- Terminology
Status: Valid GB/T 7920.17: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 7920.17-2009 | English | 559 |
Add to Cart
|
5 days [Need to translate]
|
Steel reinforcement (bar) processing machinery -- Terminology
| Valid |
GB/T 7920.17-2009
|
| GB/T 7920.17-1987 | English | 359 |
Add to Cart
|
3 days [Need to translate]
|
Steel reinforcement (bar) processing machinery--Terminology
| Obsolete |
GB/T 7920.17-1987
|
PDF similar to GB/T 7920.17-2009
Basic data | Standard ID | GB/T 7920.17-2009 (GB/T7920.17-2009) | | Description (Translated English) | Steel reinforcement (bar) processing machinery -- Terminology | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | P95 | | Classification of International Standard | 01.040.91; 91.220 | | Word Count Estimation | 24,278 | | Date of Issue | 2009-04-13 | | Date of Implementation | 2010-01-01 | | Older Standard (superseded by this standard) | GB/T 7920.17-1987 | | Regulation (derived from) | National Standard Approval Announcement 2009 No.5 (Total No.145) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the steel processing machinery main terms and definitions. This section applies to steel processing machinery. | GB/T 7920.17-2009: Steel reinforcement (bar) processing machinery -- Terminology---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Steel reinforcement (bar) processing machinery.Terminology
ICS 01.040.91; 91.220
P95
National Standards of People's Republic of China
Replacing GB/T 7920.17-1987
Steel processing machinery terminology
Posted 2009-04-13
2010-01-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Preface Ⅰ
1 Scope 1
2 steel reinforced mechanical 1
3 reinforced molding machinery 4
4 steel bar header machinery 9
5 strands tensioning device 10
Chinese index 12
English 14 Index
Foreword
This Part replaces GB/T 7920.17-1987 "steel processing machinery term."
This part is GB/T 7920.17-1987 "steel processing machinery term" amendment. Referring revision adopted GB/T 18576-
2001 "Building construction machinery and equipment - Terms and definitions" and ISO 11375-1998 "Building construction machinery and equipment Name and definition" Steel
Gluten content processing machinery terms, compared with the GB/T 7920.17-1987 standard main changes are as follows.
Content added the following terms.
--- Cold-rolled ribbed steel bar forming machine;
--- Rolled and twisted steel molding machine;
--- Cold-drawn steel screw machine;
--- Steel mesh molding machine;
--- Bending steel hoop machine;
--- Reinforced arc bending machine;
--- Reinforcement cage forming machine;
--- Steel truss machine.
This part is proposed by China Machinery Industry Federation.
This part of the National Construction Machinery and Construction Equipment Standardization Technical Committee (SAC/TC328) centralized.
This section is drafted. Beijing Institute of Architectural mechanization, machinery factory Yanshan University, Taiyuan Heavy Machinery, Shenyang Jianzhu University,
Beijing Shougang Steel New Electronics Co., Ltd., Langfang Construction Machinery Co., Ltd. Kaibo.
The main drafters of this section. Zhang Xuejun Liu GOLD, Wen Hao, Luxiu Chun, Rui high, left Yunfa, Lirong Kai.
This part of the standard replaces the previous editions are.
--- GB/T 7920.17-1987.
Steel processing machinery terminology
1 Scope
GB/T 7920 provisions of this part of the main steel processing machinery terminology and definitions.
This section applies to steel processing machinery.
2 bars strengthen machinery
At room temperature, or reinforced steel wire strong pull, pulling, rolling machinery.
2.1 Classification
2.1.1
At room temperature, the tensile strength of steel bar (steel tensile stress exceeds the yield point) of the machinery.
2.1.1.1
Pull winch produced utilizing cold-drawn steel machine.
2.1.1.2
The use of the hydraulic system to produce cold-drawn steel tensile machine.
2.1.2
At room temperature, the round steel (wire) through wire drawing dies repeatedly pulling force to enhance the strength, reduced diameter machinery.
2.1.2.1
Drive spool is a vertical steel (wire) drawing machine, can be divided into single or double reel spool.
2.1.2.2
The drive spool is horizontal reinforcement (wire) drawing machine, it can be divided into single or double reel spool.
2.1.2.3
Steel (wire) twice in a drawing by steel wire drawing die bore (wire) drawing machine.
2.1.3
At room temperature, the round bar by rolling head over the rolling force to enhance the strength and form of ribs steel machinery.
2.1.3.1
Cold-rolling head with dynamic mechanism ribbed steel molding machine.
2.1.3.2
Cold-rolling head no power bodies ribbed steel molding machine.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 7920.17-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 7920.17-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 7920.17-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 7920.17-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 7920.17-2009?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 7920.17-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|