|
US$169.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 6548-2011: Corrugated board -- Determination of adhesion
Status: Valid GB/T 6548: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 6548-2011 | English | 169 |
Add to Cart
|
3 days [Need to translate]
|
Corrugated board -- Determination of adhesion
| Valid |
GB/T 6548-2011
|
| GB/T 6548-1998 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Corrugated fibreboard--Determination of ply adhesive strength
| Obsolete |
GB/T 6548-1998
|
| GB/T 6548-1986 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Testing method for adhesion of corrugated fibreboard
| Obsolete |
GB/T 6548-1986
|
PDF similar to GB/T 6548-2011
Basic data | Standard ID | GB/T 6548-2011 (GB/T6548-2011) | | Description (Translated English) | Corrugated board -- Determination of adhesion | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Y30 | | Classification of International Standard | 85-010 | | Word Count Estimation | 7,786 | | Date of Issue | 2011-05-12 | | Date of Implementation | 2011-09-15 | | Older Standard (superseded by this standard) | GB/T 6548-1998 | | Quoted Standard | GB/T 450; GB/T 10739; GB/T 22876 | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 6 of 2011 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the corrugated board adhesive strength measurement method. This standard applies to the determination of all types of corrugated board adhesive strength. | GB/T 6548-2011: Corrugated board -- Determination of adhesion---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Corrugated board - Determination of adhesion
ICS 85-010
Y30
National Standards of People's Republic of China
Replacing GB/T 6548-1998
Determination of adhesive strength of corrugated board
Issued on. 2011-05-12
2011-09-15 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard replaces GB/T 6548-1998 "corrugated board adhesive strength assay."
Compared with the standard GB/T 6548-1998 The main changes are as follows.
--- Normative references instead of the reference standard, delete the GB/T 6546-1998 "corrugated board edge crush strength assay"
An increase of GB/T 22876 "Paper, paperboard and corrugated board compression tester description and Calibration" (1998 edition, Chapter 2, of the
Chapter 2 edition);
--- Increase the adhesive strength of terms and definitions (Chapter 3 of this edition);
--- Modify refine the principles set forth (1998 Edition Chapter 3, Chapter 4 of this edition);
--- Modify the compression tester (1998 version 4.1, this version 5.1);
--- Revised cut the sample means (1998 version 4.2, this version 5.2);
--- Increasing the attachment (the release frame) technical requirements (1998 version 4.3, this version 5.3);
--- Modify the number and size of sample preparation (1998 version 5.3, this version 6.3);
--- Modify the test sample rack loaded peel icon (Figure 2 1998 version, this version of Figure 2);
--- Modify refine the pin step (1998 version 6.1, this version 7.1);
--- Increased test illustrate the different layers of corrugated cardboard each adhesive layer (1998 version 6.2, this version of the 7.2 to 7.3);
--- Modify the adhesive strength and adhesive strength formula Value Description (1998 edition, Chapter 7, Chapter 8 of this edition).
The standard proposed by China National Light Industry Council.
The standard paper by the National Standardization Technical Committee (SAC/TC141) centralized.
This standard was drafted. Guangdong Entry-Exit Inspection and Quarantine Technology Center, China Pulp and Paper Research Institute.
The main drafters of this standard. red Zhou Ying, Guo Renhong, Wendy Xie, Department of temporary items, Li Min.
This standard replaces the standards previously issued as follows.
--- GB 6548-1986, GB/T 6548-1998.
Determination of adhesive strength of corrugated board
1 Scope
This standard specifies the method for the determination of corrugated board adhesive strength.
This standard applies to the determination of the adhesive strength of various types of corrugated board.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 450 and take samples to an aspect of paper and paperboard samples, positive and negative determination (GB/T 450-2008, ISO 186.
2002, MOD)
GB/T 10739 paper, paperboard and pulp sample processing and testing standard atmospheric conditions (GB/T 10739-2002, eqv ISO 187.
1990)
GB/T 22876 paper, cardboard and corrugated board compression tester description and calibration (GB/T 22876-2008, ISO 13820.
1996, MOD)
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1
Adhesive strength plyadhesivestrength
Under test conditions, the separation unit length flute corrugated board adhesive line force required in Newtons per meter (N/m) represents.
Principle 4
The needle attachment (the release frame) into the sample surface and fluting (Lane) between the paper (or between the paper and the paper flute), and then inserted the needle sample
Shaped attachment (the release frame) pressure to do relative motion, which is measured separately separate part of the required maximum force.
5 Instruments
5.1 compression tester
Compression tester shall comply with GB/T 22876 of.
5.2 CD-like device
Cutout device can use an electric, pneumatic or manual sample preparation tool, but it should be neat trimming specimens, and perpendicular to the corrugated board.
5.3 release frame
5.3.1 release is made on the frame attachment portion and a lower portion of annexes, it is means for applying a uniform pressure on the adhesive portion of each sample. Each section
Annex inserted by the equidistant between flute corrugated board voids pin member and the support member composition, see Figure 1.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 6548-2011_English be delivered?Answer: Upon your order, we will start to translate GB/T 6548-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 6548-2011_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 6548-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 6548-2011?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6548-2011 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|