HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 6320-2008 English PDF

US$229.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 6320-2008: Mechanical dial comparators
Status: Valid

GB/T 6320: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 6320-2008English229 Add to Cart 3 days [Need to translate] Mechanical dial comparators Valid GB/T 6320-2008
GB/T 6320-1997English359 Add to Cart 3 days [Need to translate] Mechanical dial comparators Obsolete GB/T 6320-1997
GB/T 6320-1986EnglishRFQ ASK 3 days [Need to translate] Mechanical dial comparators Obsolete GB/T 6320-1986

PDF similar to GB/T 6320-2008


Standard similar to GB/T 6320-2008

GB/T 1216   GB/T 22092   GB/T 22097   GB/T 6312   GB/T 6314   GB/T 6313   

Basic data

Standard ID GB/T 6320-2008 (GB/T6320-2008)
Description (Translated English) Mechanical dial comparators
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J42
Classification of International Standard 17.040.30
Word Count Estimation 10,165
Date of Issue 2008-02-28
Date of Implementation 2008-08-01
Older Standard (superseded by this standard) GB/T 6320-1997
Quoted Standard GB/T 17163; GB/T 17164
Regulation (derived from) National Standard Approval Announcement 2008 No.3 (Total No.116)
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the gear lever comparator terms and definitions, Types and basic parameters, requirements, test methods, inspection methods, signs and other packaging. This standard applies to indexing is 0. 0005 mm 0. 001 mm 0. 002 mm 0. 005 mm and 0. 01 mm gear lever comparator.

GB/T 6320-2008: Mechanical dial comparators

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Mechanical dial comparators ICS 17.040.30 J42 National Standards of People's Republic of China Replacing GB/T 6320-1997 Gear lever comparator Posted 2008-02-28 2008-08-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard replaces GB/T 6320-1997 "gear lever comparator." This standard and GB/T 6320-1997 "gear lever comparator" compared differ only in the preparation of the format. The standard proposed by China Machinery Industry Federation. The standard measuring instrument by the National Standardization Technical Committee (SAC/TC132) centralized. This standard is drafted by. Harbin Measuring & Cutting Tool Group Co., Ltd., China Institute of Metrology. The main drafters of this standard. Ling Yi, Zhang Wei, Wu Ying, Tian, \u200b\u200bGu Qiumei, Zhao. This standard replaces the standards previously issued as follows. GB 6320-1986, GB/T 6320-1997. Gear lever comparator

1 Scope

This standard specifies the gear lever comparator of terms and definitions, types and basic parameters, requirements, test methods, test methods, marking and Packaging. This standard applies to indexing is 0.0005mm, 0.001mm, 0.002mm, 0.005mm and 0.01mm lever gear ratio Representing an instrument (hereinafter referred to as "comparator").

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 17163 dimensional measuring instruments - Basic terminology GB/T 17164 dimensional measuring instruments - Product terms

3 Terms and Definitions

GB/T 17163, GB/T 17164 and established in the following terms and definitions apply to this standard. 3.1 The technical specifications, rules for gear lever comparator predetermined error limits.

4 Types and basic parameters

Type 4.1 Comparator of the type shown in Figure 1 and Figure 2. Illustration illustration purposes only and does not indicate a detailed structure.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 6320-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 6320-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 6320-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 6320-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 6320-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6320-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.