|
US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 6315-2008: Vernier, dial and digital display universal bevel protractors
Status: Valid GB/T 6315: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 6315-2008 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Vernier, dial and digital display universal bevel protractors
| Valid |
GB/T 6315-2008
|
| GB/T 6315-1996 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
Vernier universal bevel protractor
| Obsolete |
GB/T 6315-1996
|
| GB 6315-1986 | English | 239 |
Add to Cart
|
2 days [Need to translate]
|
Universal bevel protractor
| Obsolete |
GB 6315-1986
|
PDF similar to GB/T 6315-2008
Basic data | Standard ID | GB/T 6315-2008 (GB/T6315-2008) | | Description (Translated English) | Vernier, dial and digital display universal bevel protractors | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J42 | | Classification of International Standard | 17.040.30 | | Word Count Estimation | 12,178 | | Date of Issue | 2008-02-02 | | Date of Implementation | 2008-07-01 | | Older Standard (superseded by this standard) | GB/T 6315-1996; JB/T 10026-1999 | | Quoted Standard | GB/T 2423.3-1993; GB/T 2423.22-2002; GB 4208-1993; GB/T 17163; GB/T 17164; GB/T 17626.2-1998; GB/T 17626.3-1998 | | Regulation (derived from) | National Standard Approval Announcement 2008 No.2 (Total No.115) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the cursor, universal table with several significant foot angle (hereinafter referred to as "universal angle ruler ") terms and definitions, forms and basic parameters, requirements, test methods, such as logo and packaging. | GB/T 6315-2008: Vernier, dial and digital display universal bevel protractors---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Vernier, dial and digital display universal bevel protractors
ICS 17.040.30
J42
National Standards of People's Republic of China
Replacing GB/T 6315-1996
Cursor, with table and several significant omnipotent angle ruler
Posted 2008-02-02
2008-07-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard is GB/T 6315-1996 "universal angle ruler cursor" and JB/T 10026-1999 "table with universal angle ruler" two standard
Quasi integration amendment.
This standard replaces GB/T 6315-1996 "universal angle ruler cursor." From the date of implementation of this standard, JB/T 10026-1999
"Table with universal angle ruler" void.
This standard and GB/T 6315-1996 The main differences are as follows.
--- Modify the standard name;
--- Increasing the table with universal angle ruler, Digital Universal angle ruler requirements.
Appendix A of this standard is an informative annex.
The standard proposed by China Machinery Industry Federation.
The standard measuring instrument by the National Standardization Technical Committee (SAC/TC132) centralized.
This standard is drafted by. Harbin Measuring & Cutting Tool Group Co., Ltd., Guilin Guanglu Measuring Instrument Co., Ltd.
Participated in the drafting of this standard. Chengdu into a tool Limited and Wuxi Tools Co., ltd.
The main drafters of this standard. in Xiaoxia, Wu Ying, Zhang Wei, Zhu Hongjie, Xing Lin Qiang, Li Long Yong, Kongfu Bao, Chen Yongqi, Luhui Liang.
This standard replaces the standards previously issued as follows.
--- GB/T 6315-1986;
--- GB/T 6315-1996.
Cursor, with table and several significant omnipotent angle ruler
1 Scope
This standard specifies the cursor table with several significant omnipotent angle ruler (hereinafter referred to as "universal angle ruler") terms and definitions, forms and basic parameters
Number, requirements, and other test methods, marking and packaging.
This standard applies to indexing is 2 'and 5', the measurement range of the cursor universal angle 0 ° ~ 320 ° and 0 ° ~ 360 ° ruler; indexing value is 2 'and
5 ', the measurement range of 0 ° ~ 360 ° angle with table omnipotent ruler; resolution of 30 ", the number of measuring range of 0 ° ~ 360 ° angle was omnipotent ruler.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 2423.3-1993 electric and electronic products environmental testing procedures Test Ca. Damp heat test method (eqv IEC
60068-2-3. 1984)
GB/T 2423.22-2002 Environmental testing for electric and electronic products Part 2. Test methods - Test N. Temperature change
(IEC 60068-2-14. 1984, IDT)
GB 4208-1993 housing protection (IP Code) (eqv IEC 529. 1989)
GB/T 17163 dimensional measuring instruments - Basic terminology
GB/T 17164 dimensional measuring instruments - Product terms
GB/T 17626.2-1998 Electromagnetic compatibility - Testing and measurement techniques - Electrostatic discharge immunity test (IEC 61000-4-2.1995,
IDT)
GB/T 17626.3-1998 Electromagnetic compatibility - Testing and measurement techniques RFEMS test (IEC 61000-4-
3.1995, IDT)
3 Terms and Definitions
GB/T 17163, GB/T 17164 and established in the following terms and definitions apply to this standard.
3.1
Electronic digital display measuring principle of the two surfaces separated by relative rotation angle reading angle measurement instrument.
3.2
Error limit by the technical norms and rules of Universal angle ruler regulations.
4 form and basic parameters
4.1 in the form of universal angle ruler as shown in Figure 1 to 3. Illustration illustration purposes only and does not indicate a detailed structure.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 6315-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 6315-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 6315-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 6315-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 6315-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6315-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|