|
US$669.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 6247.4-2013: Rock drilling machines and portable power tools -- Terminology -- Part 4: Performance test
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 6247.4-2013 | English | 669 |
Add to Cart
|
5 days [Need to translate]
|
Rock drilling machines and portable power tools -- Terminology -- Part 4: Performance test
| Valid |
GB/T 6247.4-2013
|
PDF similar to GB/T 6247.4-2013
Basic data | Standard ID | GB/T 6247.4-2013 (GB/T6247.4-2013) | | Description (Translated English) | Rock drilling machines and portable power tools -- Terminology -- Part 4: Performance test | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J48;J84 | | Classification of International Standard | 01.040.19 | | Word Count Estimation | 29,235 | | Quoted Standard | GB/T 6247.1; GB/T 6247.2; GB/T 6247.3 | | Adopted Standard | ISO 3857-3-1989, MOD | | Regulation (derived from) | National Standards Bulletin 2013 No. 27 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the performance test generic terms, drilling machines, hand-held portable power tools and pneumatic product performance testing machinery and other jargon. This standard applies to drilling machines, pneumatic tools and hydraulic t | GB/T 6247.4-2013: Rock drilling machines and portable power tools -- Terminology -- Part 4: Performance test
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rock drilling machines and portable power tools Terminology Part 4. Performance test
ICS 01.040.19
J48, J84
National Standards of People's Republic of China
Drilling machines and portable power tools term
Part 4. Performance test
-Part 4. Performancetest
(ISO 3857-3. 1989, Compressors, pneumatictoolsandmachines
-Vocabulary-Part 3. Pneumatictoolsandmachines, MOD)
Issued on. 2013-12-31
2014-10-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 generic term performance test 1
4 drilling machines 3
5 Pneumatic Tools 6
6 Hydraulic Tools 8
7 air motor 10
8 Other 12
Appendix A (informative) of this section and ISO 3857-3. structural changes in 1989 compared to 13
Annex B (informative) of this section and ISO 3857-3. 1989 Technical Differences and Reasons 17
Index 20
Foreword
GB/T 6247 "drilling machines and portable power tools - term" is divided into four parts.
--- Part 1. drilling machines, pneumatic tools and machinery;
--- Part 2. hydraulic tools;
--- Part 3. parts and bodies;
--- Part 4. Performance test.
This section GB/T 46247 Part of.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This section uses redrafted Law Amendment uses ISO 3857-3. 1989 "compressors, pneumatic tools and machines - Vocabulary - Part 3. Gas
Moving tools and machinery. "
This part of ISO 3857-3. 1989, compared with more adjustments in the structure, listed in Appendix A of this part and ISO 3857-3. 1989
The reg number control list.
This part of ISO 3857-3. 1989 as compared to the existence of technical differences between the terms of these differences has been involved through its outer margins
Vertical single-line position (|) were marked. Appendix B gives a list of corresponding technical differences and their causes.
This part made the following editorial changes.
--- The standard name changed to "drilling machines and portable power tools - Terminology - Part 4. Performance test";
--- Increase the informative Appendix A and Appendix B.
This part is proposed by China Machinery Industry Federation.
This part of the drilling machines and pneumatic tools by the National Standardization Technical Committee (SAC/TC173) centralized.
This section is drafted. Tianshui pneumatic drilling machines Tool Research Institute, Dongguan University of Technology.
The main drafters of this section. High school track, Zhou Zi-rong.
Drilling machines and portable power tools term
Part 4. Performance test
1 Scope
This section GB/T 6247 defines the general term performance test, drilling machines, hand-held portable power tools and pneumatic machinery production
Glossary product performance tests.
This section applies to drilling machines, pneumatic tools and hydraulic tools, portable power tools and pneumatic machinery.
This section does not include drilling machines, pneumatic tools and terms related to noise and vibration test hydraulic tool product, nor does it include in addition to pneumatic
Other terms pneumatic mechanical tests other than the motor.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 6247.1 drilling machines and portable power tools - Terminology - Part 1. drilling machines, pneumatic tools and machinery
(GB/T 6247.1-2013, ISO 5391.2003, MOD)
GB/T 6247.2 drilling machines and portable power tools - Terminology - Part 2. Hydraulic tools (GB/T 6247.2-2013,
ISO 17066.2007, IDT)
GB/T 6247.3 drilling machines and portable power tools - Terminology - Part 3. Parts and agencies
3 Performance Test generic term
Definitions The following terms of reference to GB/T 6247.1 defined drilling machines, pneumatic tools and machinery terminology, GB/T 6247.2
Hydraulic tools defined terms, GB/T 6247.3 defined parts and institutional terms.
3.1
Type test typetest
To fully verify the quality of the product, performance, and when identification of whether the products fully comply with the requirements of the test carried out.
3.2
Factory inspection ex-workstest
In the final stages of product manufacturing (during storage or shipment before), inspection of product quality inspection conducted.
3.3
Performance Test performancetest
To test product performance test conducted.
3.4
Life Test lifetest
For the life of the main components of the test product evaluation conducted.
3.5
Industrial Test industrialtest
The applicability, reliability and performance of a comprehensive assessment of product tests carried out.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 6247.4-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 6247.4-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 6247.4-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 6247.4-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|