|
US$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 6120-2012: Metal slitting saw
Status: Valid GB/T 6120: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 6120-2012 | English | 259 |
Add to Cart
|
3 days [Need to translate]
|
Metal slitting saw
| Valid |
GB/T 6120-2012
|
| GB/T 6120-1996 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
Metal slitting saws--Types and dimensions
| Obsolete |
GB/T 6120-1996
|
| GB 6120-1985 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Metal slotting saws with medium teeth
| Obsolete |
GB 6120-1985
|
PDF similar to GB/T 6120-2012
Basic data | Standard ID | GB/T 6120-2012 (GB/T6120-2012) | | Description (Translated English) | Metal slitting saw | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J41 | | Classification of International Standard | 25.100.20 | | Word Count Estimation | 11,149 | | Older Standard (superseded by this standard) | GB/T 6120-1996; GB/T 6121-1996 | | Quoted Standard | GB/T 6132 | | Adopted Standard | ISO 2296-2011, MOD | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 1 of 2012 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard provides a fine-tooth, medium and coarse tooth saw blade cutter tooth types and sizes, materials and hardness, appearance and surface roughness, marking and packaging and other basic requirements. This standard applies to diameter 20mm ~ 315 | GB/T 6120-2012: Metal slitting saw---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS25.100.20
J41
National Standards of People's Republic of China
Replacing GB/T 6120-1996
GB/T 6121-1996
Blade cutter
(ISO 2296.2011, Metalslittingsawswithfineandcoarseteeth-
Metricseries, MOD)
Issued on. 2012-07-01 2012-03-09 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard rule according to GB/T 1.1-2009 given draft.
This standard replaces GB/T 6120-1996 "blade cutter type and size" and GB/T 6121-1996 "blade cutter technology
condition".
This standard and GB/T 6120-1996 and GB/T 6121-1996 compared to the main changes are as follows.
--- Modify the scope;
--- Modify the normative references;
--- Revised GB/T 6120-1996 Table 1, Table 2 and Table 3 of the note;
--- 4.1 holes should be made within the scope of the d keyway by d≥125mm to d≥110mm;
--- Revised GB/T 6121-1996 Notes to Table 4;
--- Remove the performance test.
This standard uses redrafted law revision adopted ISO 2296.2011 "metal with a fine tooth blade cutter and coarse teeth - Metric series" (in English).
This standard and ISO 2296.2011 the following modifications have compared differences in editorial and technical terms related to these differences have been adopted in its
Outer margin position of a single vertical line (︱) were marked.
--- Deleted international standards foreword, preface increased our standards;
--- Modify the scope;
--- The international standard to this standard;
--- Normative references to international standards in the use of alternative national standards;
--- Increasing the symbol explanation;
--- The coarse tooth blade cutter type size to tooth blade cutter, added a new coarse tooth blade cutter type size;
--- D hole should be made out of the range of keyway by d≥125mm to d≥110mm;
--- Increase the marked sample;
--- Increase the technical conditions;
--- Revised Appendix A method for determining the number of teeth of the saw blade cutter;
--- Increased detection method B blade cutter runout appendix.
The standard proposed by China Machinery Industry Federation.
This standard tool by the National Standardization Technical Committee (SAC/TC91) centralized.
This standard is drafted by. Chengdu Tool Research Institute Co., Ltd, Wenling west of the cutting tool Technology Service Centre Limited.
The main drafters of this standard. Yu Zeng ring, a new source.
This standard replaces the standards previously issued as follows.
--- GB/T 1120-1985, GB/T 1121-1985, GB/T 6120-1985, GB/T 6120-1996, GB/T 6121-1985,
GB/T 6121-1996.
Blade cutter
1 Scope
This standard specifies the fine teeth, tooth and coarse tooth blade cutter types and dimensions, material and hardness, appearance and surface roughness, logos and packages
Equipment and other basic requirements.
This standard applies to a diameter of 20mm ~ 315mm metal cutting blade cutter.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 6132 cutters and cutter arbor swap Size (GB/T 6132-2006, ISO 240.1994, IDT)
3 Symbol
d --- cutter blade outer diameter;
D --- cutter blade bore diameter;
d1 --- cutter blade axis table diameter;
L --- cutter blade thickness.
4 type and size
4.1 blade cutter types and dimensions according to Figure 1 and Table 1, Table 2, Table 3 provisions. D≥110mm, and when L≥3mm, the hole should be prepared
Determination of the keyway, keyway size according to the provisions of GB/T 6132's. Blade cutter tooth number, see Appendix A.
figure 1
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 6120-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 6120-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 6120-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 6120-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 6120-2012?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6120-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|