|
US$149.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 6118-2010: End mills -- Technical specifications
Status: Valid GB/T 6118: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 6118-2010 | English | 149 |
Add to Cart
|
2 days [Need to translate]
|
End mills -- Technical specifications
| Valid |
GB/T 6118-2010
|
| GB/T 6118-1996 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
End mills--Technical specifications
| Obsolete |
GB/T 6118-1996
|
| GB 6118-1985 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
End mills technical specifications
| Obsolete |
GB 6118-1985
|
PDF similar to GB/T 6118-2010
Basic data | Standard ID | GB/T 6118-2010 (GB/T6118-2010) | | Description (Translated English) | End mills -- Technical specifications | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J41 | | Classification of International Standard | 25.100.20 | | Word Count Estimation | 5,523 | | Date of Issue | 2010-11-10 | | Date of Implementation | 2011-03-01 | | Older Standard (superseded by this standard) | GB/T 6118-1996 | | Quoted Standard | GB/T 6117.1; GB/T 6117.2; GB/T 6117.3; JB/T 10231.3 | | Regulation (derived from) | National Standard Approval Announcement 2010 No.8 (Total No.163) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the mills position tolerance, material and hardness, appearance and surface roughness, signs and basic requirements for packaging. This standard applies by GB/T 6117. 1, GB/T 6117. 2 and GB/T 6117. 3 production mill, according to the agreement between the other mills can also refer to use. | GB/T 6118-2010: End mills -- Technical specifications---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
End mills. Technical specifications
ICS 25.100.20
J41
National Standards of People's Republic of China
Replacing GB/T 6118-1996
End mills technical conditions
Issued on. 2010-11-10
2011-03-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard replaces GB/T 6118-1996 "end mills technical conditions."
This standard and GB/T 6118-1996 has compared the following changes.
--- Format prepared by the GB/T 1.1-2000;
--- Deleted the Chapter 3, "symbol" of the content;
--- The chapter title by the Chapter 4 "size" to "size and position tolerance";
--- 4.1 adds the material requirements of high-performance high-speed steel;
--- 4.1 adds the material requirements of welding shank;
--- Deleted the contents of Chapter 6 performance tests;
--- Deleted Appendix A "cutter runout detection method up" content.
The standard proposed by China Machinery Industry Federation.
This standard tool by the National Standardization Technical Committee (SAC/TC91) centralized.
Drafting of this standard. Chengdu into a tool Group Co., Ltd., Chengdu Tool Research Institute, Shanghai Tool Works Co., Ltd.
The main drafters of this standard. Zhao Qing, Yansong Bo, Huang Hua new, check States soldiers, Li Zheng Wei, Zhang.
This standard replaces the standards previously issued as follows.
--- GB/T 6118-1985, GB/T 6118-1996.
End mills technical conditions
1 Scope
This standard specifies the location of the end mill tolerances, materials and hardness, appearance and surface roughness, marking and basic requirements for packaging.
This standard applies to press GB/T 6117.1, GB/T 6117.2 and GB/T 6117.3 production of end mills. According to both supply and demand Association
Yee, also can refer to the other end mill use.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 6117.1 End mills - Part 1. straight shank end mill (GB/T 6117.1-2010, ISO 1641-1.2003, MOD)
GB/T 6117.2 mills - Part 2. Morse taper shank end mill (GB/T 6117.2-2010, ISO 1641-2. 1978,
MOD)
GB/T 6117.3 mills - Part 3. 7.24 shank end mill (GB/T 6117.3-2010, ISO 1641-3.2003,
MOD)
JB/T 10231.3 Tool inspection methods - Part 3. end mill
3 dimensions and position tolerances
End mill dimensions and position tolerances given in Table 1, the detection method according to JB/T 10231.3 execution.
Table 1 millimeters
Radial circumferential edge of the shank axis runout
A turn adjacent
Standard series standard series long series long series
End of the blade shank
The axis of the end face
Runout
Working part diameter taper
Standard Series Long Series
1.9 to 6 0.025 0.032 0.013 0.016
> 6 to 18 0.032 0.040 0.016 0.020
> 18 to 28 0.040 0.050 0.020 0.025
> 28 to 95 0.050 0.063 0.025 0.032
0.050
0.060
0.02 0.03
4 material and hardness
4.1 Material
4.1.1 End mills work part W6Mo5Cr4V2 or equivalent high-speed steel (Code HSS) manufacturing, may also be used
W6Mo5Cr4V2Al or equivalent and above, high speed steel (Code HSS-E) manufactured.
4.1.2 Welding milling steel shank with 45 or equivalent in performance to other grades of steel manufacturing.
4.2 Hardness
End mills working part. ordinary high-speed steel (HSS) d≤6mm, 62HRC ~ 65HRC;
d > 6mm, 63HRC ~ 66HRC.
High speed steel (HSS-E) is not less than 64HRC.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 6118-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 6118-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 6118-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 6118-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 6118-2010?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6118-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|