HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 6117.2-2010 English PDF

US$149.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 6117.2-2010: End mills -- Part 2: Milling cutters with Morse taper shanks
Status: Valid

GB/T 6117.2: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 6117.2-2010English149 Add to Cart 2 days [Need to translate] End mills -- Part 2: Milling cutters with Morse taper shanks Valid GB/T 6117.2-2010
GB/T 6117.2-1996English199 Add to Cart 2 days [Need to translate] End mills--Part 2: Milling cutters with Morse taper shanks Obsolete GB/T 6117.2-1996

PDF similar to GB/T 6117.2-2010


Standard similar to GB/T 6117.2-2010

GB/T 33524.2   GB/T 972   GB/T 5104   GB/T 6132   GB/T 6122   GB/T 6117.1   

Basic data

Standard ID GB/T 6117.2-2010 (GB/T6117.2-2010)
Description (Translated English) End mills -- Part 2: Milling cutters with Morse taper shanks
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J41
Classification of International Standard 25.100.20
Word Count Estimation 5,595
Date of Issue 2010-11-10
Date of Implementation 2011-03-01
Older Standard (superseded by this standard) GB/T 6117.2-1996
Quoted Standard GB/T 1443; GB/T 4133
Adopted Standard ISO 1641-2-1978, MOD
Regulation (derived from) National Standard Approval Announcement 2010 No.8 (Total No.163)
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the Morse taper shank end mill type, basic requirements such as size and marking. This section applies to a diameter greater than 5mm ~ 75mm Morse taper shank end mills.

GB/T 6117.2-2010: End mills -- Part 2: Milling cutters with Morse taper shanks

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
End mills Part 2. Milling cutters with Morse taper shanks ICS 25.100.20 J41 National Standards of People's Republic of China Replacing GB/T 6117.2-1996 End mill Part 2. Morse taper shank end mill Endmils-Part 2. MilingcutterswithMorsetapershanks (ISO 1641-2. 1978, Endmilsandslotdrils- Part 2. MilingcutterswithMorsetapershanks, MOD) Issued on. 2010-11-10 2011-03-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 6117 "end mill" consists of three parts. --- Part 1. straight shank end mills; --- Part 2. Morse taper shank end mills; --- Part 3. 7.24 shank cutter. This part of GB/T 26117 Part of. The partial modification of international standards ISO 1641-2. 1978 "and end mills Slot drills - Part 2. Morse taper shank cutter." This section according to ISO 1641-2. 1978 redrafted. Compared to 1978 there is the following editorial changes and technical differences. this part of ISO 1641-2. --- Remove the foreword to international standards; --- Used instead of using decimal comma ",". ","; --- Normative documents column items, ISO 296 with the standard of GB/T 1443 in place, ISO 5413 with our standard GB/T 4133 instead; --- Increase the marked sample; --- Table 1 Recommended diameter d increase in size 24, size 71; --- Increased coarse teeth, tooth, Teeth fine teeth; --- Remove the ISO 1641-2. in ball mills and keyway cutters 1978 legend; --- Remove the ISO 1641-2. 1978 Table 1 keyway cutters, short dimension; --- Remove the ISO 1641-2. 1978 Table 1 Note. This Part replaces GB/T 6117.2-1996 "mills - Part 2. Morse taper shank end mill type and size." This portion of the GB/T 6117.2-1996 have compared the following changes. --- Added "foreword"; --- Canceled Chapter 3, "symbol" of the content; --- Table 1 Recommended diameter d increase in size 24, size 71; Header --- Table 1 "group" to the "type"; --- Remove the 4.3 tag example item 2 and paragraph 3, sample content; --- According to GB/T 1.1 format requirements for the preparation of editorial changes were made. This part is proposed by China Machinery Industry Federation. This part of the tool by the National Standardization Technical Committee (SAC/TC91) centralized. This part mainly drafted by. Chengdu into a tool Group Co., Ltd., Chengdu Tool Research Institute, Shanghai Tool Works Co., Ltd. The main drafters of this section. Zhao Qing, Yansong Bo, Huang Hua new, check States soldiers, Li Zheng Wei, Zhang. This part of the standard replaces the previous editions are. --- GB 1106 ~ 1108-1973, GB 1106-1985; --- GB/T 6117.2-1996. End mill Part 2. Morse taper shank end mill

1 Scope

GB/T 6117 This section provides the basic requirements of the Morse taper shank end mill type, size and marking like. This section applies to a diameter greater than 5mm ~ 75mm Morse taper shank end mills.

2 Normative references

The following documents contain provisions which, through reference in this part of the GB/T 6117, constitute provisions of this part. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 1443 from machine tools and tool handles with clip cone (GB/T 1443-1996, eqv ISO 296.1991) GB/T 4133 Morse tapers transmission type and size (GB/T 4133-1984, eqv ISO 5413. 1976)

3 type and size

3.1 Morse taper shank end mills according to their type divided into two kinds of patterns, Figures 1 and 2, the size shown in Table 1. Morse taper shank end mill according blade length is divided into different standard series and long series. Ⅰ type Morse taper shank end mill shank dimensions and tolerances according to GB/T 1443. Ⅱ type Morse taper shank end mill shank dimensions and tolerances According to GB/T 4133. Figure 1 Ⅰ type Figure 2 Ⅱ type

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 6117.2-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 6117.2-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 6117.2-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 6117.2-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 6117.2-2010?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6117.2-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.